Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ004206B0000 ABB PPEA2037 System pro E Power IP4X/IP5X AER Side/Back Panel H2000 W300
ABB PPEA2037 System pro E Power IP4X/IP5X AER side/back panel with a nominal height of 2000 mm and width of 300 mm for compatible modular low-voltage switchboard enclosures.
£133.86
Why Choose the ABB PPEA2037 System pro E Power IP4X/IP5X Side/Back Panel?
The ABB PPEA2037 is an IP4X/IP5X side/back panel accessory designed for the ABB System pro E Power modular low-voltage switchboard range. Identified by manufacturer order code 1STQ004206B0000, this enclosure component is specified for a nominal height of 2000 mm and width of 300 mm, making it suitable for compatible System pro E Power switchboard configurations requiring these dimensions.
Side and back panels are essential components of modular electrical enclosure systems, providing external coverage and helping protect internal electrical equipment from unintended access and environmental exposure. The PPEA2037 is part of ABB's coordinated System pro E Power accessory range, supporting professional switchboard construction for industrial, commercial and infrastructure applications.
The manufacturer's designation, IP4X_IP5X AER.SIDE/BACK PAN.H2000 W300, identifies the product's intended side/back panel function, IP4X/IP5X protection configurations, AER arrangement and specified dimensions. The panel must be installed with compatible enclosure components to achieve the intended protection performance of the completed assembly.
Key Advantages
- Dedicated side/back panel for ABB System pro E Power modular switchboards.
- Specified for compatible IP4X/IP5X enclosure configurations.
- 2000 mm nominal height for the designated enclosure arrangement.
- 300 mm nominal width for compatible narrow panel installations.
- Supports enclosure coverage and physical separation of internal electrical equipment.
- Designed for the manufacturer-designated AER configuration.
- Integrates with ABB's coordinated modular switchboard construction platform.
- Supports consistent enclosure component selection for professional panel builders.
- Suitable for industrial and commercial electrical distribution installations.
- Dedicated ABB order code supports accurate procurement and replacement.
Key Features
- ABB System pro E Power switchboard enclosure accessory.
- PPEA2037 manufacturer model designation.
- 1STQ004206B0000 ABB order code.
- Side/back panel configuration.
- IP4X/IP5X manufacturer-designated protection configurations.
- 2000 mm specified panel height.
- 300 mm specified panel width.
- AER manufacturer configuration identifier.
- Designed for compatible modular low-voltage electrical switchboards.
- Supports coordinated enclosure assembly and panel replacement.
IP4X/IP5X Enclosure Panel for Professional Switchboard Construction
The ABB PPEA2037 is designed for System pro E Power installations requiring a side/back panel with a specified height of 2000 mm and width of 300 mm. It forms part of the enclosure structure used to house and protect electrical distribution equipment in compatible low-voltage switchboard assemblies.
Correctly selected enclosure panels help complete the physical boundaries of a switchboard, supporting the intended separation of electrical components from personnel and the surrounding installation environment. The PPEA2037 provides a manufacturer-designated component for the specified AER side/back panel arrangement.
The product is identified for IP4X/IP5X protection configurations. Under IEC 60529, IP4X indicates protection against access with a wire and solid foreign objects measuring 1 mm or greater. IP5X indicates a dust-protected enclosure classification, where dust ingress is limited to an extent that does not interfere with satisfactory equipment operation.
These IP classifications relate to the protection provided by a correctly assembled enclosure. The PPEA2037's designation does not independently establish the protection rating of an individual panel or guarantee the IP rating of a completed switchboard. Suitable mounting arrangements, compatible adjacent components and any required sealing provisions must be considered.
The AER identifier is retained from ABB's manufacturer designation. Its exact installation meaning and compatibility requirements should be verified against the applicable ABB System pro E Power assembly drawings.
The PPEA2037 is an enclosure panel accessory, not a complete switchboard or electrical protective device. The finished assembly must be designed, installed and verified in accordance with applicable requirements, including IEC/EN 61439 where relevant.
Typical Applications
- ABB System pro E Power main electrical distribution switchboards.
- Compatible IP4X/IP5X low-voltage enclosure assemblies.
- Side and back panel installations in modular electrical cabinets.
- Industrial electrical power distribution systems.
- Commercial building electrical distribution boards.
- Switchboard configurations requiring 2000 mm-high panels.
- Compatible enclosure arrangements requiring a 300 mm-wide panel.
- Professional electrical panel building and switchboard manufacturing.
- Maintenance, refurbishment and replacement of matching ABB enclosure panels.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ004206B0000 |
| Product group | System Pro E Power |
| Product type | Side/back panel |
| Accessory category | Electrical switchboard enclosure panels and covers |
| Manufacturer protection designation | IP4X / IP5X |
| Nominal height | 2000 mm |
| Nominal width | 300 mm |
| Manufacturer configuration | AER |
| Compatible switchboard family | ABB System pro E Power |
| Installation application | Side or back enclosure panel for compatible modular switchboards |
| Manufacturer designation | IP4X_IP5X AER.SIDE/BACK PAN.H2000 W300 |
Frequently Asked Questions
What is the ABB PPEA2037 used for?
The ABB PPEA2037 is a side/back enclosure panel designed for compatible ABB System pro E Power modular low-voltage switchboards. It provides enclosure coverage for the specified AER and IP4X/IP5X configurations.
What are the dimensions of the ABB PPEA2037 panel?
The manufacturer specifies a nominal height of 2000 mm and width of 300 mm. The exact overall dimensions, fixing positions and installation clearances should be confirmed using ABB's technical drawings.
What IP protection configurations are associated with the ABB PPEA2037?
The PPEA2037 is designated for IP4X/IP5X configurations. IP4X relates to protection against specified solid objects and access with a wire, while IP5X indicates dust protection. The protection achieved depends on the completed enclosure assembly and correct installation.
Which ABB switchboard system is compatible with the PPEA2037?
The PPEA2037 belongs to the ABB System pro E Power modular low-voltage switchboard range. Compatibility with a particular enclosure configuration should be checked against the applicable ABB installation instructions.
Does the ABB PPEA2037 include a complete switchboard enclosure?
No. The PPEA2037 is an individual side/back panel accessory rather than a complete enclosure. The enclosure frame, doors, mounting hardware and any additional accessories must be selected according to the intended System pro E Power assembly.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides coordinated enclosure components for professional low-voltage switchboard construction. The PPEA2037 IP4X/IP5X side/back panel offers a manufacturer-designated 2000 mm-high and 300 mm-wide solution for compatible AER configurations, supporting consistent and organised electrical distribution assembly construction.
