Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PPRA1827 System pro E Power IP4X/IP5X side/back panel accessory with a specified height of 1800 mm and width of 1250 mm for compatible AER R modular switchboard configurations.
£255.27
The ABB PPRA1827 is a dedicated IP4X/IP5X side/back panel accessory for the ABB System pro E Power modular low-voltage switchboard range. Identified by manufacturer order code 1STQ004205B0000, this component features the manufacturer designation IP4X_IP5X AER.SIDE/BA PAN.R.H1800W1250, specifying a panel configuration with a nominal height of 1800 mm and width of 1250 mm.
Side and back panels are important elements of electrical switchboard construction, providing enclosure coverage and supporting the intended protection of internal electrical equipment. The PPRA1827 belongs to ABB's coordinated System pro E Power accessory range and is intended for compatible switchboard configurations requiring the specified side/back panel arrangement.
The product designation identifies IP4X/IP5X protection configurations and includes the manufacturer-specific identifiers AER and R. These identifiers should be matched to the relevant ABB assembly documentation when selecting the correct panel for an installation.
The ABB PPRA1827 is intended for System pro E Power installations requiring a side/back panel arrangement with a specified 1800 mm height and 1250 mm width. It forms part of the modular enclosure system used to construct low-voltage electrical distribution switchboards.
Enclosure panels help define the external boundaries of electrical switchboard assemblies and contribute to the intended separation of internal electrical equipment from the surrounding environment. Correct panel selection is important for maintaining mechanical compatibility with the enclosure structure and supporting the required protection arrangement.
The manufacturer designation references IP4X and IP5X. Under the IP classification system, IP4X relates to protection against access with a wire and solid foreign objects of at least 1 mm, while IP5X identifies a dust-protected enclosure classification. These designations describe different first-digit protection levels and do not independently establish the complete IP rating of a finished switchboard.
The AER and R identifiers are retained from ABB's product description. Their precise mechanical or positional meaning should be verified against the applicable System pro E Power assembly drawings rather than assumed from the abbreviated designation.
The PPRA1827 is an enclosure panel accessory rather than a complete electrical distribution board. Achieving the intended protection rating depends on the full enclosure configuration, compatible panels, doors, seals, installation details and assembly verification. Compliance with applicable IEC/EN 61439 requirements must be assessed for the completed switchboard.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ004205B0000 |
| Product group | System Pro E Power |
| Product type | Side/back panel accessory |
| Accessory category | Switchboard enclosure panels and covers |
| Manufacturer protection designation | IP4X / IP5X |
| Specified height | 1800 mm |
| Specified width | 1250 mm |
| Manufacturer configuration | AER |
| Manufacturer arrangement | R |
| Compatible switchboard family | ABB System pro E Power |
| Application | Enclosure panel installation in compatible modular low-voltage switchboards |
| Manufacturer designation | IP4X_IP5X AER.SIDE/BA PAN.R.H1800W1250 |
The ABB PPRA1827 is a side/back panel accessory intended for compatible ABB System pro E Power modular low-voltage switchboards. It supports enclosure coverage in the specified IP4X/IP5X configuration.
The manufacturer designation specifies a nominal height of 1800 mm and width of 1250 mm. The precise overall dimensions and mounting details should be confirmed using ABB's technical drawings.
The PPRA1827 is designated for IP4X/IP5X configurations. The protection rating achieved by a completed switchboard depends on the full enclosure assembly and correct installation of all required components.
AER and R are manufacturer-specific identifiers in the product designation IP4X_IP5X AER.SIDE/BA PAN.R.H1800W1250. Their exact meaning and installation requirements should be confirmed against ABB System pro E Power documentation.
No. The PPRA1827 is identified as a side/back panel accessory, not a complete enclosure. The required frame, doors, fixing components and other enclosure accessories must be selected according to the intended System pro E Power configuration.
ABB System pro E Power provides coordinated enclosure components for professional low-voltage switchboard construction. The PPRA1827 side/back panel accessory supports compatible IP4X/IP5X configurations with a specified height of 1800 mm and width of 1250 mm, helping panel builders select matching components for modular electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.