Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ004197B0000 ABB PPEA1847 IP4X/IP5X AER Side/Back Panel H1800 W400 System pro E power
ABB PPEA1847 System pro E power AER side/back enclosure panel with a specified height of 1800 mm and width of 400 mm, designed for compatible modular low-voltage switchboard arrangements associated with IP4X/IP5X protection configurations.
£111.14
Why Choose the ABB PPEA1847 IP4X/IP5X AER Side/Back Panel?
The ABB PPEA1847 is a dedicated IP4X/IP5X AER side/back panel from the ABB System pro E power range of modular low-voltage switchboard components. Identified by the manufacturer designation IP4X_IP5X AER.SIDE/BACK PAN H1800 W400, this panel is specified for compatible switchboard arrangements requiring a nominal 1800 mm height and 400 mm width.
ABB System pro E power provides a modular platform for constructing low-voltage electrical distribution switchboards using coordinated structural frames, enclosure panels, doors, mounting accessories and internal installation components. The PPEA1847 forms part of this system, providing a manufacturer-designated side/back panel for the corresponding AER enclosure configuration.
The product designation identifies IP4X and IP5X as associated protection classifications, making the panel relevant to switchboard designs requiring the corresponding enclosure protection arrangements. These classifications describe protection against access and solid foreign objects; they do not independently establish water ingress protection. The final protection rating depends on the complete enclosure construction, compatible accessories and correct assembly.
With its defined 1800 mm × 400 mm configuration, the ABB PPEA1847 supports accurate panel selection for professional switchboard manufacturing, enclosure construction and compatible refurbishment projects. The official ABB order code is 1STQ004197B0000.
Key Advantages
- Genuine ABB accessory: Part of the System pro E power modular low-voltage switchboard range.
- Dedicated side/back panel: Designed for compatible enclosure side or rear covering arrangements.
- 1800 mm height: Clearly specified dimensional configuration for accurate selection.
- 400 mm width: Identifies the corresponding panel size within the switchboard system.
- IP4X/IP5X designation: Associated with enclosure configurations requiring the specified protection arrangements.
- AER configuration: Specifically identified for the corresponding ABB enclosure arrangement.
- Modular system compatibility: Supports integration with suitable System pro E power structural components.
- Physical enclosure coverage: Helps complete the designated side or rear section of a switchboard assembly.
- Coordinated construction: Supports consistent selection of manufacturer-designated enclosure accessories.
- Professional installation: Suitable for compatible commercial and industrial low-voltage distribution switchboards.
- Accurate procurement: ABB order code 1STQ004197B0000 simplifies product identification and replacement matching.
Key Features
- ABB System pro E power modular switchboard accessory.
- Manufacturer model: PPEA1847.
- Product designation: IP4X_IP5X AER.SIDE/BACK PAN H1800 W400.
- Side/back enclosure panel configuration.
- Specified height: 1800 mm.
- Specified width: 400 mm.
- Associated protection designations: IP4X and IP5X.
- Identified for the AER configuration.
- Designed for compatible modular low-voltage switchboard assemblies.
- Supports physical covering of the corresponding enclosure section.
- Suitable for coordinated installation with compatible ABB enclosure structures and accessories.
- Applicable to professional panel-building and compatible refurbishment projects.
- ABB manufacturer order code: 1STQ004197B0000.
Reliable Side and Rear Enclosure Integration for IP4X/IP5X Switchboards
Low-voltage switchboards require appropriately selected enclosure panels to complete their mechanical structure and support the intended degree of protection. Side and rear covering components form part of the overall enclosure boundary, helping separate installed electrical equipment from the surrounding environment when correctly integrated into the assembly.
The ABB PPEA1847 is specified as an AER side/back panel with a nominal height of 1800 mm and width of 400 mm. These dimensions allow panel builders to identify the corresponding component for a compatible System pro E power enclosure arrangement.
The product designation includes both IP4X and IP5X. Under the IP classification system, IP4X concerns protection against access with a wire and solid foreign objects of 1 mm and larger, while IP5X denotes dust-protected construction and protection against access with a wire. These classifications apply to the relevant enclosure arrangement rather than automatically being achieved by an individual uninstalled panel.
Correct installation is particularly important where the completed switchboard must meet a specified ingress protection requirement. The surrounding frame, panel interfaces, fixing arrangements, doors, covers and any required sealing components must be compatible with the intended enclosure configuration. A panel with an IP4X/IP5X designation does not, by itself, establish the protection rating of the completed assembly.
The AER identifier is part of the ABB manufacturer designation and should be matched to the relevant System pro E power assembly documentation. The supplied product information does not establish the panel material, finish, thickness, fixing method or whether additional sealing components are included. These details should be verified when they affect installation or compatibility.
ABB System pro E power supports modular switchboard construction using coordinated enclosure and installation accessories. Selecting a manufacturer-designated panel such as the PPEA1847 helps maintain consistency between the planned switchboard dimensions and the installed mechanical components.
The PPEA1847 is a mechanical enclosure panel, not an electrical protective device. It does not determine the rated current, short-circuit withstand capability or protection functions of the installed electrical equipment. The complete low-voltage switchboard should be designed and verified according to the applicable IEC/EN 61439 requirements, with enclosure protection assessed under the relevant IP classification requirements.
Typical Applications
- ABB System pro E power modular low-voltage switchboards.
- Compatible AER side enclosure panel installations.
- Compatible AER rear enclosure panel installations.
- Switchboard configurations requiring 1800 mm high enclosure panels.
- Enclosure arrangements requiring a 400 mm wide panel.
- Low-voltage switchboard designs incorporating IP4X protection arrangements.
- Low-voltage switchboard designs incorporating IP5X protection arrangements.
- Industrial electrical distribution cabinets.
- Commercial building electrical distribution assemblies.
- Main and secondary low-voltage distribution switchboards.
- Professional electrical panel manufacturing and enclosure assembly.
- Refurbishment of compatible ABB System pro E power switchboards.
- Replacement of matching ABB PPEA1847 side/back enclosure panels.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ004197B0000 |
| Manufacturer designation | IP4X_IP5X AER.SIDE/BACK PAN H1800 W400 |
| Product type | Side/back enclosure panel |
| Accessory category | Low-voltage switchboard enclosure panels |
| Panel height | 1800 mm |
| Panel width | 400 mm |
| Associated protection classifications | IP4X / IP5X |
| Configuration identifier | AER |
| Panel application | Side or rear enclosure covering arrangement |
| System compatibility | ABB System pro E power |
| Component function | Mechanical enclosure covering for compatible switchboard configurations |
| Product classification | Mechanical switchboard enclosure accessory |
Frequently Asked Questions
What is the ABB PPEA1847 used for?
The ABB PPEA1847 is an IP4X/IP5X AER side/back enclosure panel designed for compatible ABB System pro E power low-voltage switchboard assemblies requiring a panel with a specified height of 1800 mm and width of 400 mm.
What are the dimensions of the ABB PPEA1847 panel?
The manufacturer designation specifies a 1800 mm height and 400 mm width. These are the stated panel dimensions; thickness and other physical measurements are not established by the supplied designation.
What do IP4X and IP5X mean for the PPEA1847?
IP4X identifies protection against access with a wire and solid foreign objects of 1 mm and larger, while IP5X identifies dust-protected construction and protection against access with a wire. The completed enclosure must be correctly designed and assembled to achieve its specified protection classification.
Can the ABB PPEA1847 be installed as a side panel or back panel?
The manufacturer designation identifies the PPEA1847 as a side/back panel. Its use in either position depends on the compatible ABB System pro E power enclosure arrangement and the applicable installation drawings.
What does AER mean in the ABB PPEA1847 designation?
AER is the configuration identifier included in the ABB manufacturer designation. Its exact installation meaning and compatibility requirements should be confirmed using the relevant System pro E power technical documentation.
Does the PPEA1847 automatically make a switchboard IP5X rated?
No. The PPEA1847 is associated with IP4X/IP5X enclosure configurations, but the final protection classification depends on the complete switchboard construction, including the frame, panel interfaces, doors, fixing arrangements and any required sealing components.
Is the ABB PPEA1847 a complete electrical enclosure?
No. The PPEA1847 is a mechanical side/back panel accessory, not a complete electrical enclosure or distribution board. Other compatible structural and enclosure components are required to construct the finished switchboard.
Can the ABB PPEA1847 be used for switchboard refurbishment?
Yes, it can be considered for compatible refurbishment or replacement projects where the existing ABB System pro E power assembly requires the same 1800 mm × 400 mm AER side/back panel. The original enclosure configuration and mounting requirements should be checked before installation.
What is the ABB order code for the PPEA1847?
The official ABB order code is 1STQ004197B0000. This identifies the PPEA1847 IP4X/IP5X AER side/back panel with a specified height of 1800 mm and width of 400 mm from the ABB System pro E power range.
Designed for Professional Low-Voltage Switchboard Construction
ABB System pro E power enclosure accessories support coordinated construction of modular low-voltage electrical distribution assemblies. The PPEA1847 provides a dedicated 1800 mm × 400 mm AER side/back panel solution for compatible IP4X/IP5X switchboard configurations, helping panel builders maintain consistent enclosure dimensions, component selection and professional assembly standards.
