1STQ004196B0000 ABB PPEA1837 IP4X/IP5X Aerated Side/Back Panel 1800 x 300 mm System pro E Power

1STQ004196B0000 ABB PPEA1837 IP4X/IP5X Aerated Side/Back Panel 1800 x 300 mm System pro E Power

ABB PPEA1837 (1STQ004196B0000) is an IP4X/IP5X application aerated side/back panel with nominal dimensions of 1800 x 300 mm, designed for compatible System pro E Power low-voltage electrical distribution switchboards.

SKU: 1STQ004196B0000Alt SKU: PPEA1837MPN: 1STQ004196B0000
Price
List Price £93.55 ex VAT
Your Price (ex VAT)
£93.55
Manufacturer Lead Time Estimated Delivery 5 weeks
Get the best trade prices Trade exclusive

Create an online account to unlock exclusive pricing, special offers and more.

Create an online account Quick & easy setup
SUBTOTAL (EX VAT) £93.55
Trade pricing is personalised to your account

Manufacturer Lead Time

£93.55

Why Choose the ABB PPEA1837 IP4X/IP5X Aerated Side/Back Panel?

The ABB PPEA1837 (1STQ004196B0000) is a purpose-designed aerated side/back panel for low-voltage electrical distribution switchboards, developed for integration into the ABB System pro E Power range. This specialist enclosure accessory is intended for compatible switchboard configurations requiring a ventilated panel arrangement with IP4X or IP5X protection provisions.

Designed for electrical switchboard enclosure applications, the PPEA1837 combines a dedicated side/back panel configuration with an aerated construction intended to support airflow within appropriately designed electrical assemblies. Ventilated enclosure components can contribute to thermal management by allowing air movement through designated openings, while the complete switchboard design determines the achieved ingress protection and cooling performance.

With a specified panel height of 1,800 mm and width of 300 mm, the ABB PPEA1837 is designed for compatible System pro E Power enclosure configurations. Its IP4X/IP5X application designation makes it suitable for switchboard projects where the required enclosure protection, ventilation arrangement and component compatibility have been established as part of the complete electrical assembly.

Key Advantages

  • Purpose-designed aerated side/back panel for ABB System pro E Power switchboards.
  • 1,800 mm height and 300 mm width for compatible enclosure configurations.
  • Specified for IP4X/IP5X enclosure applications within the appropriate ABB assembly arrangement.
  • Aerated panel design supports ventilation in suitably configured electrical switchboards.
  • Suitable for compatible side or rear enclosure panel positions.
  • Helps support thermal management through designated ventilation openings.
  • Dedicated ABB accessory design promotes consistent modular switchboard construction.
  • Supports professional enclosure assembly and component selection.
  • Suitable for industrial and commercial low-voltage power distribution installations.

Key Features

  • ABB System pro E Power modular switchboard accessory.
  • PPEA1837 aerated side/back panel.
  • ABB manufacturer order code 1STQ004196B0000.
  • 1,800 mm nominal panel height.
  • 300 mm nominal panel width.
  • IP4X/IP5X application designation.
  • Designed for side/back enclosure panel applications.
  • Aerated construction for use in compatible ventilated switchboard arrangements.
  • Supports airflow as part of an appropriately designed enclosure ventilation system.
  • Suitable for modular low-voltage main distribution switchboards.
  • Designed for integration with compatible ABB System pro E Power enclosure components.
  • Application-specific accessory for professional electrical panel building.

Reliable Enclosure Ventilation and Protection for Electrical Switchboards

The ABB PPEA1837 aerated side/back panel is designed for use within compatible System pro E Power electrical distribution assemblies. Aerated enclosure panels provide designated openings that can allow air circulation through a switchboard, supporting the thermal management strategy of installations containing circuit breakers, busbars and other electrical distribution equipment.

The ABB System pro E Power range is a modular low-voltage main distribution switchboard platform developed for industrial and commercial electrical installations. The wider system supports assemblies with rated currents up to 6,300 A, depending on configuration, and is designed for applications covered by IEC 61439-2. The PPEA1837 is a mechanical enclosure accessory rather than a current-carrying component or electrical protective device.

The IP4X and IP5X designations relate to protection against access to hazardous parts and the ingress of solid foreign objects under IEC 60529. IP4X concerns protection against solid objects of at least 1 mm, while IP5X provides dust-protected enclosure performance. The PPEA1837 must be installed within the appropriate ABB enclosure arrangement, as the achieved IP rating and ventilation performance depend on the complete assembly, associated components and installation method.

Specifically identified for 1,800 mm high and 300 mm wide panel configurations, the PPEA1837 supports the construction of compatible side or rear enclosure sections. Its aerated design makes it relevant to electrical switchboard projects requiring planned airflow paths, while preserving the intended enclosure construction and protection requirements.

Typical Applications

  • ABB System pro E Power low-voltage main distribution switchboards.
  • Ventilated side and rear enclosure panel arrangements.
  • Industrial electrical distribution cabinets and switchgear assemblies.
  • Commercial building main electrical distribution installations.
  • Switchboard configurations requiring IP4X/IP5X protection provisions.
  • Electrical enclosure ventilation and thermal management arrangements.
  • 1,800 mm high switchboard configurations with 300 mm wide panel positions.
  • OEM electrical panel building and switchboard manufacturing.
  • Electrical infrastructure upgrades and enclosure refurbishment projects.

Technical Specifications

Product group System pro E Power
Manufacturer part number 1STQ004196B0000
ABB order code 1STQ004196B0000
Product designation IP4X_IP5X AER.SIDE/BACK PAN H1800 W300
Product type Aerated side/back panel
Accessory category Electrical switchboard enclosure panels
Compatible switchboard range ABB System pro E Power
Nominal panel height 1,800 mm
Nominal panel width 300 mm
Protection configuration IP4X / IP5X application designation
Panel construction Aerated / ventilated
Mounting application Side or rear enclosure panel position
Primary function Enclosure coverage with provision for airflow
Application Low-voltage electrical distribution switchboards
Associated ingress protection standard IEC 60529
Associated assembly standard IEC 61439-2

Frequently Asked Questions

What is the ABB PPEA1837 (1STQ004196B0000) used for?

The ABB PPEA1837 is an aerated side/back panel designed for compatible ABB System pro E Power low-voltage switchboards. It provides enclosure panel coverage with ventilation provisions for appropriately configured electrical distribution assemblies.

What are the dimensions of the ABB PPEA1837?

The PPEA1837 is specified with a nominal height of 1,800 mm and width of 300 mm. These values identify the intended panel configuration within the ABB System pro E Power enclosure system.

What do IP4X and IP5X mean for the ABB PPEA1837?

IP4X refers to protection against access with a wire and the ingress of solid objects of at least 1 mm, while IP5X indicates a dust-protected enclosure. The PPEA1837 is designated for IP4X/IP5X applications, but the actual protection rating must be established for the complete, correctly assembled switchboard.

What is the benefit of an aerated side/back panel?

An aerated panel incorporates ventilation openings that can support airflow through a switchboard enclosure. This may assist with heat dissipation when used as part of a correctly designed ventilation arrangement, with thermal performance depending on the complete electrical assembly.

Is the ABB PPEA1837 compatible with System pro E Power switchboards?

Yes. The ABB PPEA1837 (1STQ004196B0000) belongs to the System pro E Power product group and is intended for compatible 1,800 mm high by 300 mm wide side/back panel configurations. Installation compatibility should be checked against the relevant ABB enclosure assembly documentation.

Trusted by Electrical Panel Builders Worldwide

ABB System pro E Power accessories support the construction of modular, professionally organised low-voltage electrical distribution assemblies. The ABB PPEA1837 aerated side/back panel provides a dedicated enclosure solution for compatible 1,800 mm × 300 mm switchboard configurations, supporting planned ventilation and integration within IP4X/IP5X enclosure arrangements.