Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ003402C0000 ABB System pro E Power E4.2 F3B Horizontal Segregation Accessory W1000 D700
ABB 1STQ003402C0000 System pro E Power horizontal segregation accessory for the designated E4.2 F3B switchboard arrangement, specified for a nominal application width of 1000 mm and depth of 700 mm.
£259.92
Why Choose the ABB System pro E Power E4.2 F3B Horizontal Segregation Accessory?
The ABB 1STQ003402C0000 is a dedicated horizontal segregation accessory designed for compatible low-voltage electrical distribution switchboards. Part of the ABB System pro E Power range, this component is specified for an ABB E4.2 circuit breaker installation using the manufacturer's F3B segregation configuration, with a nominal 1000 mm width and 700 mm depth.
Identified by ABB as HORIZ.SEG.F3B E4.2 W=1000 D=700, this accessory provides a manufacturer-specific solution for horizontal internal segregation in designated System pro E Power assemblies. Its specification combines several important selection characteristics: horizontal segregation orientation, the F3B configuration designation, association with ABB E4.2 and an installation format corresponding to a nominal 1000 mm wide by 700 mm deep switchboard arrangement.
The ABB 1STQ003402C0000 supports coordinated internal separation within compatible modular switchboards. It is intended for professional electrical panel builders, switchboard manufacturers and industrial system integrators who require a dedicated segregation accessory matching the specified E4.2 F3B arrangement.
Key Advantages
- Genuine ABB System pro E Power horizontal segregation accessory.
- Designed for compatible low-voltage electrical distribution switchboards.
- Specified for a designated ABB E4.2 circuit breaker installation.
- Identified for the manufacturer's F3B segregation configuration.
- Supports horizontal internal separation within compatible switchboard assemblies.
- Designed for a nominal 1000 mm application width.
- Specified for a nominal 700 mm application depth.
- Provides a manufacturer-specific segregation solution for selected E4.2 installations.
- Supports coordinated integration with compatible ABB System pro E Power structural components.
- Helps panel builders distinguish the required accessory from segregation components intended for other dimensions or configurations.
- Suitable for professional switchboard construction, electrical distribution projects and maintenance applications.
Key Features
- ABB System pro E Power modular switchboard accessory.
- 1STQ003402C0000 ABB manufacturer order code.
- Horizontal segregation component.
- Associated with the ABB E4.2 circuit breaker designation.
- F3B manufacturer segregation configuration.
- 1000 mm nominal application width.
- 700 mm nominal application depth.
- Intended for internal separation in designated low-voltage switchboard assemblies.
- Designed for integration into compatible ABB System pro E Power enclosure arrangements.
- Manufacturer-specific configuration for the stated E4.2 application.
- Suitable for professional electrical panel manufacturing.
- Identified by the exact ABB description HORIZ.SEG.F3B E4.2 W=1000 D=700.
Horizontal Internal Segregation for ABB E4.2 Switchboard Installations
Internal segregation is an important consideration in the design and construction of low-voltage electrical distribution switchboards. Depending on the complete assembly configuration, segregation accessories can help define internal sections, distinguish equipment areas and support the intended separation between different functional spaces. The selected accessory must correspond to the manufacturer's specified arrangement.
The ABB 1STQ003402C0000 is specifically designated for horizontal segregation associated with an ABB E4.2 installation. Unlike vertical segregation accessories, which are intended for designated upright separation arrangements, this component is identified for a horizontal internal separation position within a compatible System pro E Power switchboard.
The manufacturer's F3B designation is a key selection detail. It identifies the specified segregation configuration, but the abbreviated product description does not independently establish every mechanical characteristic or the complete internal separation arrangement. Panel builders should confirm the exact F3B requirements using ABB's applicable technical documentation.
The specified 1000 mm width and 700 mm depth describe the nominal application configuration. These dimensions should not automatically be interpreted as the precise physical measurements of the individual accessory or every component included under the order code. The required compartment dimensions, fixing positions and adjacent structural components should be checked before installation.
Compatibility must also be assessed against the selected E4.2 circuit breaker arrangement and the complete switchboard structure. The manufacturer description does not establish the accessory's material, quantity of individual parts, included fixing hardware or suitability for every E4.2 configuration. These details should be verified using the relevant ABB System pro E Power assembly instructions.
Installing this horizontal segregation accessory alone does not establish a particular IEC 61439 form of internal separation, ingress-protection rating or electrical safety classification. These characteristics depend on the complete switchboard design, installation of all required components and verification of the finished assembly.
Typical Applications
- ABB System pro E Power modular electrical distribution switchboards.
- Horizontal segregation for designated ABB E4.2 circuit breaker installations.
- Switchboard arrangements requiring the manufacturer's F3B segregation configuration.
- Internal separation within compatible low-voltage electrical assemblies.
- Switchboard configurations with a nominal 1000 mm application width.
- Compatible enclosure arrangements with a nominal 700 mm depth.
- Industrial electrical power distribution cabinets.
- Commercial building low-voltage electrical distribution systems.
- Main electrical distribution switchboards.
- OEM switchboard manufacturing and professional electrical panel building.
- Maintenance and replacement of matching ABB System pro E Power segregation accessories.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ003402C0000 |
| SKU / MPN | 1STQ003402C0000 |
| Manufacturer description | HORIZ.SEG.F3B E4.2 W=1000 D=700 |
| Product type | Horizontal segregation accessory |
| Accessory category | Switchboard internal segregation components |
| Segregation orientation | Horizontal |
| Manufacturer segregation designation | F3B |
| Associated circuit breaker designation | ABB E4.2 |
| Nominal application width | 1000 mm |
| Nominal application depth | 700 mm |
| Compatible switchboard system | ABB System pro E Power |
| Application | Horizontal internal segregation for the designated E4.2 F3B switchboard arrangement |
| Installation type | Mechanical integration into a compatible modular switchboard assembly |
| Product function | Supporting the specified horizontal segregation configuration |
| Manufacturer-specific configuration | HORIZ.SEG.F3B E4.2 |
Frequently Asked Questions
What is the ABB 1STQ003402C0000 used for?
The ABB 1STQ003402C0000 is a horizontal internal segregation accessory for compatible ABB System pro E Power switchboards. It is specified for a designated ABB E4.2 F3B arrangement with a nominal width of 1000 mm and depth of 700 mm.
What dimensions are specified for the ABB 1STQ003402C0000?
The accessory is specified for a nominal 1000 mm width and 700 mm depth. These dimensions identify the intended switchboard application configuration rather than confirmed physical measurements of every individual accessory component.
Which circuit breaker designation is associated with the ABB 1STQ003402C0000?
The manufacturer description identifies ABB E4.2 as the associated circuit breaker designation. Compatibility with a particular E4.2 installation and its associated switchboard components should be confirmed using ABB's applicable technical documentation.
What does F3B mean in the ABB 1STQ003402C0000 description?
F3B is the manufacturer's segregation configuration designation. The abbreviated product description does not fully define its technical scope, so the exact arrangement and any required associated components should be confirmed using ABB's System pro E Power assembly documentation.
Does the ABB 1STQ003402C0000 provide a specific IEC 61439 form of separation?
Not independently. The ABB 1STQ003402C0000 is a horizontal segregation accessory, but a particular IEC 61439 form of internal separation depends on the complete switchboard design and assembly. The intended separation arrangement must be verified against ABB's technical instructions and the finished switchboard configuration.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides coordinated enclosure and internal segregation accessories for professional low-voltage electrical distribution switchboards. The ABB 1STQ003402C0000 supports the designated F3B horizontal segregation arrangement associated with E4.2 installations, using a nominal 1000 mm wide and 700 mm deep application configuration.
