Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ003400C0000 ABB System pro E Power Emax 2 E4.2 3P Fixed Vertical Installation Kit W1000 H650
ABB System pro E Power vertical installation kit for compatible three-pole fixed Emax 2 E4.2 air circuit breakers, specified for a 1000 mm switchboard width and 650 mm installation height with the F-INT configuration reference.
£727.74
Why Choose the ABB System pro E Power E4.2 Fixed Vertical Installation Kit?
The ABB 1STQ003400C0000 is a dedicated three-pole fixed circuit breaker installation kit for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Designed for an ABB Emax 2 E4.2 air circuit breaker (ACB), this accessory is specified for a vertical installation arrangement with a nominal switchboard width of 1000 mm and installation height of 650 mm.
As part of the ABB System pro E Power modular switchboard range, this installation kit supports the integration of compatible Emax 2 E4.2 circuit breakers into professionally engineered power distribution assemblies. Its application-specific configuration helps electrical panel builders plan the installation of a fixed three-pole air circuit breaker within the designated switchboard space.
The manufacturer designation KIT 3P F-INT E4.2 FIXED V. W=1000 H=650 identifies the accessory as a three-pole E4.2 fixed vertical installation kit incorporating the F-INT configuration reference. Supplied under ABB order code 1STQ003400C0000, the kit should be selected in accordance with the applicable System pro E Power assembly documentation and Emax 2 E4.2 installation requirements.
Key Advantages
- Dedicated Emax 2 E4.2 installation: Designed for compatible ABB Emax 2 E4.2 air circuit breaker arrangements.
- Three-pole configuration: Specified for a 3P circuit breaker installation.
- Fixed circuit breaker execution: Intended for the designated fixed E4.2 mounting arrangement.
- Vertical installation: Supports the specified vertical orientation within a compatible switchboard.
- 1000 mm nominal width: Designed for the corresponding System pro E Power switchboard configuration.
- 650 mm nominal installation height: Matches the specified vertical installation space.
- Manufacturer-defined F-INT configuration: Provides a specific installation reference for component selection.
- Modular switchboard integration: Supports coordinated assembly using compatible ABB structural and installation accessories.
- Organised equipment installation: Helps panel builders accommodate the specified air circuit breaker within the switchboard layout.
- Genuine ABB accessory: Identified by manufacturer order code 1STQ003400C0000.
Key Features
- ABB System pro E Power modular switchboard installation accessory.
- Manufacturer designation: KIT 3P F-INT E4.2 FIXED V. W=1000 H=650.
- Designed for compatible ABB Emax 2 E4.2 air circuit breakers.
- Specified three-pole circuit breaker configuration.
- Intended for fixed circuit breaker execution.
- Specified vertical installation orientation.
- Nominal switchboard width of 1000 mm.
- Nominal installation height of 650 mm.
- Includes the manufacturer configuration reference F-INT.
- Designed for integration with compatible System pro E Power structural components.
- Suitable for professional low-voltage electrical distribution switchboard assembly.
- Manufacturer order code 1STQ003400C0000.
Vertical Emax 2 E4.2 Installation for Low-Voltage Power Distribution
Air circuit breakers are used in low-voltage power distribution systems to provide switching and electrical protection functions when correctly specified and installed. Larger distribution assemblies require suitable mechanical support, electrical connection arrangements and equipment clearances to accommodate the selected air circuit breaker and associated accessories.
The ABB 1STQ003400C0000 installation kit is specified for a compatible Emax 2 E4.2 three-pole fixed air circuit breaker in a vertical installation arrangement. Its nominal 1000 mm switchboard width and 650 mm installation height identify the intended System pro E Power configuration, helping panel builders select the appropriate installation accessory for the designated switchboard layout.
The fixed execution distinguishes this arrangement from withdrawable circuit breaker installations, which require different mounting and connection provisions. The manufacturer designation also includes F-INT; the precise installation implications of this reference should be confirmed against ABB's applicable technical documentation.
The installation kit is not a complete air circuit breaker and does not independently provide switching, protection or control functions. The correct Emax 2 E4.2 breaker, terminals, electrical connections, operating accessories and any additional installation components must be selected according to ABB's approved assembly instructions. The completed switchboard must satisfy the required electrical ratings, mechanical clearances, internal separation arrangements and applicable standards.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Vertical installation of compatible ABB Emax 2 E4.2 air circuit breakers.
- Three-pole fixed ACB mounting arrangements.
- Industrial main low-voltage distribution boards.
- Commercial building electrical distribution systems.
- Manufacturing plant power distribution infrastructure.
- Electrical distribution assemblies incorporating Emax 2 protective equipment.
- Modular switchboards with a nominal width of 1000 mm.
- Installation arrangements requiring a nominal height of 650 mm.
- OEM electrical panel building and switchboard manufacturing.
- Professional switchboard installation and maintenance.
Technical Specifications
| ABB order code | 1STQ003400C0000 |
|---|---|
| Product series | System pro E Power |
| Product group | System pro E Power |
| Product designation | KIT 3P F-INT E4.2 FIXED V. W=1000 H=650 |
| Product type | Air circuit breaker installation kit |
| Product category | Switchboard circuit breaker mounting accessories |
| Associated circuit breaker family | ABB Emax 2 |
| Associated circuit breaker frame | E4.2 |
| Associated circuit breaker type | Air circuit breaker (ACB) |
| Associated pole configuration | 3P |
| Circuit breaker execution | Fixed |
| Installation orientation | Vertical |
| Nominal switchboard width | 1000 mm |
| Nominal installation height | 650 mm |
| Manufacturer configuration reference | F-INT |
| Primary function | Installation of compatible fixed E4.2 circuit breaker arrangements |
| Compatible switchboard system | ABB System pro E Power |
| Application | Low-voltage electrical distribution assemblies |
Frequently Asked Questions
What is the ABB 1STQ003400C0000 installation kit used for?
The ABB 1STQ003400C0000 is an installation kit for a compatible ABB Emax 2 E4.2 three-pole fixed air circuit breaker in a vertical mounting arrangement within a System pro E Power low-voltage distribution switchboard.
Which circuit breaker is associated with the ABB 1STQ003400C0000 kit?
The kit is specified for a compatible ABB Emax 2 E4.2 three-pole air circuit breaker in fixed execution. Exact compatibility with individual breaker variants and connection arrangements must be confirmed using ABB's technical documentation.
What switchboard dimensions are specified for this E4.2 installation kit?
The manufacturer designation specifies a 1000 mm nominal switchboard width and a 650 mm nominal installation height. These values identify the intended installation configuration rather than the complete physical dimensions of every kit component.
Is the ABB 1STQ003400C0000 designed for fixed or withdrawable E4.2 circuit breakers?
The kit is specifically identified for a fixed Emax 2 E4.2 circuit breaker arrangement. Withdrawable circuit breaker executions require installation and connection components appropriate to their respective configurations.
Does the ABB 1STQ003400C0000 kit include an Emax 2 E4.2 circuit breaker?
The product is identified as an installation kit, not a complete air circuit breaker. The required Emax 2 E4.2 breaker and any additional electrical connection, operating or mounting accessories should be selected according to the applicable ABB System pro E Power assembly documentation.
Trusted by Electrical Panel Builders and Power Distribution Professionals
ABB System pro E Power installation accessories support modular, organised and professionally engineered low-voltage electrical distribution assemblies. The 1STQ003400C0000 Emax 2 E4.2 fixed vertical installation kit provides an application-specific mounting solution for electrical engineers, industrial contractors and switchboard manufacturers integrating compatible three-pole air circuit breakers into ABB power distribution systems.
