Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ003398C0000 ABB System pro E Power Blind Mounting Plate H650 W1000
ABB System pro E Power blind mounting plate with a nominal height of 650 mm and width of 1000 mm for compatible low-voltage electrical distribution switchboard assemblies.
£415.85
Why Choose the ABB System pro E Power Blind Mounting Plate 650 x 1000 mm?
The ABB Blind Mounting Plate 650 x 1000 mm, manufacturer order code 1STQ003398C0000, is a mounting accessory for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Featuring a specified height of 650 mm and width of 1000 mm, this blind mounting plate is intended for use in modular electrical panel assemblies requiring a solid mounting surface.
As part of the ABB System pro E Power product range, this mounting plate supports the construction of organised internal equipment layouts within industrial and commercial switchboards. Its blind plate configuration provides an unperforated mounting surface, subject to confirmation of the precise construction and fixing arrangement in ABB's technical documentation, allowing panel builders to plan component positioning according to the requirements of the complete electrical assembly.
The manufacturer designation BLIND MOUNTING PLATE H=650MM W=1000MM identifies the accessory by its function and nominal dimensions. Supplied under ABB order code 1STQ003398C0000, it should be selected alongside compatible System pro E Power structural components and installed in accordance with the manufacturer's assembly instructions.
Key Advantages
- Dedicated mounting accessory: Designed for compatible ABB System pro E Power switchboard assemblies.
- 650 mm nominal height: Provides a defined vertical dimension for the specified mounting arrangement.
- 1000 mm nominal width: Supports the corresponding modular switchboard configuration.
- Blind mounting plate design: Provides a solid mounting area for suitable equipment installation arrangements.
- Modular system integration: Intended for use with compatible ABB System pro E Power structural components.
- Organised panel construction: Supports planned positioning of electrical equipment within distribution assemblies.
- Application flexibility: Can be considered for compatible equipment mounting requirements where the specified plate dimensions are appropriate.
- Professional switchboard assembly: Suitable for appropriately engineered industrial and commercial low-voltage electrical installations.
- Manufacturer identification: Clearly specified by ABB order code 1STQ003398C0000.
Key Features
- ABB System pro E Power modular switchboard accessory.
- Product designation: BLIND MOUNTING PLATE H=650MM W=1000MM.
- Blind mounting plate configuration.
- Specified nominal height of 650 mm.
- Specified nominal width of 1000 mm.
- Intended for internal equipment mounting arrangements within compatible switchboards.
- Supports modular low-voltage electrical distribution panel construction.
- Designed for integration with compatible ABB switchboard structural components.
- Suitable for professional electrical panel building applications.
- Manufacturer order code 1STQ003398C0000.
Reliable Equipment Mounting for Low-Voltage Electrical Distribution Switchboards
Low-voltage electrical distribution switchboards require carefully planned internal layouts to accommodate protective devices, control equipment, terminal assemblies and other electrical components. Mounting plates provide installation surfaces within the switchboard structure, helping panel builders position equipment according to the mechanical and electrical requirements of the completed assembly.
The ABB 1STQ003398C0000 blind mounting plate is specified for compatible System pro E Power configurations requiring a 650 mm high and 1000 mm wide mounting accessory. Its defined dimensions allow electrical designers and switchboard manufacturers to identify the appropriate component for the intended installation arrangement.
Blind mounting plates can provide a suitable basis for planned equipment positioning where the complete switchboard design permits. The suitability of this particular ABB plate for specific devices, fixing methods, mounting loads or modifications must be confirmed against the applicable manufacturer documentation. The product designation does not establish its material, thickness, load capacity or supplied fixing hardware.
Installation should follow ABB's approved System pro E Power assembly instructions, including requirements for structural compatibility, equipment clearances, earthing and protective bonding where applicable. The mounting plate itself does not determine the electrical ratings or compliance classification of the complete switchboard.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Internal mounting arrangements within compatible electrical panel assemblies.
- Industrial main and sub-distribution boards.
- Commercial building electrical distribution installations.
- Manufacturing plant power distribution infrastructure.
- Electrical control and distribution cabinet construction.
- Switchboard configurations requiring a 650 mm high mounting plate.
- Modular panel arrangements requiring a 1000 mm wide mounting accessory.
- OEM electrical panel building and switchboard manufacturing.
- Replacement of specified ABB System pro E Power mounting components.
Technical Specifications
| ABB order code | 1STQ003398C0000 |
|---|---|
| Product series | System pro E Power |
| Product group | System pro E Power |
| Product designation | BLIND MOUNTING PLATE H=650MM W=1000MM |
| Product type | Blind mounting plate |
| Product category | Electrical switchboard mounting accessories |
| Nominal height | 650 mm |
| Nominal width | 1000 mm |
| Mounting plate configuration | Blind |
| Primary function | Equipment mounting support within compatible switchboard assemblies |
| Compatible switchboard system | ABB System pro E Power |
| Application | Low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB 1STQ003398C0000 blind mounting plate used for?
The ABB 1STQ003398C0000 is a blind mounting plate intended for compatible ABB System pro E Power low-voltage electrical distribution switchboards. It provides a mounting accessory for suitable internal equipment installation arrangements.
What are the dimensions of the ABB 1STQ003398C0000 mounting plate?
The manufacturer designation specifies a 650 mm nominal height and 1000 mm nominal width. Additional dimensions, including plate thickness, should be checked against ABB's technical documentation.
Which ABB switchboard system is this mounting plate designed for?
The mounting plate belongs to the ABB System pro E Power product group. Compatibility with a particular switchboard frame, enclosure or internal mounting arrangement should be confirmed using ABB's applicable assembly documentation.
Does the ABB blind mounting plate include electrical equipment or fixing accessories?
The product is identified as a blind mounting plate, not as a complete electrical equipment assembly. The manufacturer designation does not confirm the inclusion of circuit breakers, control devices or fixing accessories, so the supplied contents should be verified before installation.
What is the ABB order code for the 650 x 1000 mm blind mounting plate?
The ABB manufacturer order code is 1STQ003398C0000. This identifies the System pro E Power blind mounting plate specified with a 650 mm height and 1000 mm width.
Trusted by Electrical Panel Builders and Power Distribution Professionals
ABB System pro E Power mounting accessories support organised, modular and professionally engineered low-voltage electrical distribution assemblies. The 1STQ003398C0000 blind mounting plate provides a specified 650 x 1000 mm mounting component for electrical engineers, industrial contractors and switchboard manufacturers constructing compatible ABB power distribution systems.
