Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002550B0000 ABB PDRM0600 System pro E Power Pre-Assembled DIN Rail Kit 600mm
ABB PDRM0600 System pro E Power pre-assembled DIN rail kit with a nominal width of 600 mm for mounting compatible electrical equipment in modular low-voltage switchboard assemblies.
£42.14
Why Choose the ABB PDRM0600 System pro E Power Pre-Assembled DIN Rail Kit?
The ABB PDRM0600 is a pre-assembled DIN rail kit with a nominal width of 600 mm, designed for integration into the ABB System pro E Power modular low-voltage switchboard range. Identified by manufacturer order code 1STQ002550B0000, this accessory provides a dedicated mounting solution for compatible DIN rail-mounted electrical equipment within professional distribution board assemblies.
DIN rail mounting systems are essential components of modern electrical panel construction, providing organised installation positions for suitable modular circuit breakers, terminal blocks, control devices and auxiliary electrical equipment. The PDRM0600 offers a pre-assembled mounting arrangement that supports efficient component selection and structured internal switchboard layouts.
As part of ABB's System pro E Power accessory range, the PDRM0600 is intended for compatible industrial, commercial and infrastructure electrical distribution applications. Its manufacturer designation, PRE-ASSEMBLED DIN RAIL KIT W 600MM, identifies its principal function and specified nominal width.
Key Advantages
- Pre-assembled DIN rail kit for professional low-voltage switchboard construction.
- Specified 600 mm nominal width for compatible mounting arrangements.
- Designed for the ABB System pro E Power modular switchboard platform.
- Supports organised installation of compatible DIN rail-mounted electrical equipment.
- Pre-assembled configuration reduces the need to specify individual rail assembly components separately.
- Supports efficient planning and installation of modular devices within distribution boards.
- Helps maintain consistent equipment mounting arrangements across switchboard projects.
- Suitable for industrial and commercial electrical distribution applications.
- Manufacturer-specific identification supports accurate procurement, maintenance and replacement.
Key Features
- ABB System pro E Power switchboard accessory.
- PDRM0600 manufacturer model designation.
- 1STQ002550B0000 ABB order code.
- Pre-assembled DIN rail kit configuration.
- 600 mm nominal width.
- Intended for compatible modular low-voltage electrical distribution boards.
- Provides a mounting arrangement for suitable DIN rail-compatible electrical devices.
- Supports structured internal equipment layouts.
- Part of ABB's coordinated modular enclosure and installation accessory system.
- Suitable for professional electrical panel building and switchboard manufacturing.
Pre-Assembled DIN Rail Mounting for Modular Electrical Distribution Boards
The ABB PDRM0600 is designed for compatible System pro E Power switchboard configurations requiring a 600 mm-wide pre-assembled DIN rail kit. It provides a coordinated mounting arrangement for suitable modular electrical equipment installed within low-voltage distribution assemblies.
DIN rail mounting is widely used in professional electrical panels because it allows compatible devices to be arranged in an accessible and organised format. Depending on the completed switchboard design, DIN rail-mounted equipment may include modular protective devices, control relays, terminal blocks, interface modules and auxiliary components.
The PDRM0600's pre-assembled construction supports straightforward product selection when planning electrical distribution board layouts. By using a manufacturer-designated installation kit, panel builders can specify the intended mounting arrangement consistently across project documentation, component schedules and bills of materials.
The ABB System pro E Power platform brings together modular enclosure structures, mounting accessories, internal segregation components and equipment installation solutions. The PDRM0600 forms part of this coordinated system, helping support structured internal equipment arrangements in compatible main distribution boards.
The PDRM0600 is a mechanical mounting accessory rather than an electrical protective device. Its precise DIN rail profile, fixing arrangement, supplied components and permissible loading should be verified using the relevant ABB technical documentation. The suitability of the kit for a particular enclosure and device arrangement must be confirmed during switchboard design.
Compliance with applicable IEC/EN 61439 requirements depends on the design, construction and verification of the completed low-voltage switchboard assembly, including its equipment mounting and internal arrangement.
Typical Applications
- ABB System pro E Power main electrical distribution switchboards.
- Mounting of compatible DIN rail electrical equipment.
- Industrial low-voltage distribution cabinets.
- Commercial building electrical distribution boards.
- Modular circuit protection and control equipment installations.
- Electrical control and auxiliary equipment compartments.
- Professional electrical panel building and switchboard manufacturing.
- Structured internal mounting arrangements in compatible modular enclosures.
- Maintenance, refurbishment and replacement of matching DIN rail mounting assemblies.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ002550B0000 |
| Product group | System Pro E Power |
| Product type | Pre-assembled DIN rail kit |
| Accessory category | DIN rail mounting and switchboard installation accessories |
| Assembly configuration | Pre-assembled |
| Nominal width | 600 mm |
| Mounting application | Compatible DIN rail-mounted electrical equipment |
| Compatible switchboard system | ABB System pro E Power |
| Installation context | Modular low-voltage electrical distribution boards |
| Manufacturer designation | PRE-ASSEMBLED DIN RAIL KIT W 600MM |
Frequently Asked Questions
What is the ABB PDRM0600 used for?
The ABB PDRM0600 is a pre-assembled DIN rail kit intended for mounting compatible DIN rail electrical equipment within ABB System pro E Power modular low-voltage switchboard assemblies.
What is the width of the ABB PDRM0600 DIN rail kit?
The PDRM0600 has a manufacturer-specified nominal width of 600 mm, as identified by its designation PRE-ASSEMBLED DIN RAIL KIT W 600MM.
Is the ABB PDRM0600 supplied as a pre-assembled kit?
Yes. The manufacturer's designation identifies the PDRM0600 as a pre-assembled DIN rail kit. The exact supplied components and fixing arrangements should be confirmed against ABB's product documentation.
Which ABB switchboard range is compatible with the PDRM0600?
The PDRM0600 belongs to the ABB System pro E Power modular low-voltage switchboard range. Compatibility with a particular enclosure or internal mounting configuration should be checked against the applicable ABB assembly instructions.
What types of equipment can be mounted using the ABB PDRM0600?
The PDRM0600 is intended for compatible DIN rail-mounted electrical equipment, potentially including modular circuit breakers, terminal blocks and control devices. The exact equipment compatibility, available mounting space and permissible loading depend on the selected installation and should be verified against the relevant technical documentation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides coordinated mounting and installation accessories for professional low-voltage switchboard construction. The PDRM0600 pre-assembled DIN rail kit offers a dedicated 600 mm-wide mounting solution for compatible modular electrical equipment, supporting organised and consistent distribution board assembly.
