Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002447B0000 ABB PHDX4417 System pro E Power Tmax XT4 4P Withdrawable with RCD Horizontal Installation Kit W800
ABB PHDX4417 (1STQ002447B0000) System pro E Power horizontal installation kit for compatible ABB Tmax XT4 4-pole withdrawable circuit breaker arrangements with RCD, specified for a nominal 800 mm wide switchboard configuration.
£217.41
Why Choose the ABB PHDX4417 System pro E Power Tmax XT4 Horizontal Installation Kit?
The ABB PHDX4417 (1STQ002447B0000) is a dedicated horizontal circuit breaker installation kit designed for compatible low-voltage electrical distribution switchboards. Part of the ABB System pro E Power range, this accessory is specified for a 4-pole ABB Tmax XT4 withdrawable circuit breaker arrangement with an RCD, within a nominal 800 mm wide switchboard configuration.
Identified by ABB as XT4 KIT 4P WITH.+RCD. HOR.INST. W=800MM, the PHDX4417 provides a manufacturer-specific installation solution for selected Tmax XT4 assemblies incorporating a residual current device. Its designation combines several important selection characteristics: ABB Tmax XT4 compatibility, 4-pole construction, a withdrawable circuit breaker arrangement, RCD accommodation and horizontal installation.
The ABB PHDX4417 supports coordinated equipment positioning within compatible System pro E Power switchboards. Designed for professional electrical panel builders, switchboard manufacturers and industrial system integrators, it helps identify the appropriate installation accessory for the specified XT4 4-pole withdrawable and RCD configuration.
Key Advantages
- Genuine ABB System pro E Power circuit breaker installation accessory.
- Designed for compatible ABB Tmax XT4 circuit breaker installations.
- Specifically designated for a 4-pole circuit breaker configuration.
- Supports the specified withdrawable installation arrangement.
- Designed for a configuration incorporating an RCD (residual current device).
- Suitable for horizontal circuit breaker installation.
- Specified for compatible switchboard arrangements with a nominal 800 mm width.
- Provides a dedicated ABB mounting solution for the designated XT4 and RCD assembly.
- Supports coordinated mechanical integration within modular low-voltage electrical distribution switchboards.
- Helps panel builders distinguish the required kit from standard XT4 mounting arrangements without an RCD designation.
- Suitable for professional switchboard manufacturing, electrical panel construction and maintenance.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PHDX4417 manufacturer product designation.
- 1STQ002447B0000 ABB order code.
- Specified for compatible ABB Tmax XT4 circuit breakers.
- 4-pole circuit breaker configuration.
- Withdrawable installation arrangement.
- Designated for a circuit breaker configuration with RCD.
- Horizontal installation orientation.
- 800 mm nominal switchboard width.
- Intended for mechanical integration into compatible low-voltage electrical distribution assemblies.
- Designed for use with selected ABB System pro E Power structural and mounting components.
- Dedicated installation accessory for professional ABB Tmax XT4 switchboard applications.
Horizontal Installation of ABB Tmax XT4 Withdrawable Circuit Breakers with RCD
Circuit breaker installation accessories play an important role in modular low-voltage switchboard construction. The correct mounting kit must correspond to the circuit breaker family, number of poles, installation method, associated protection devices and available enclosure space. Manufacturer-specific accessories help establish the intended mechanical arrangement within a coordinated switchboard system.
The ABB PHDX4417 is specifically designated for the horizontal installation of a 4-pole ABB Tmax XT4 withdrawable circuit breaker arrangement with RCD. This distinguishes it from mounting kits intended for fixed or plug-in circuit breaker installations and from arrangements that do not include the additional RCD configuration.
An RCD (residual current device) is associated with residual current protection, but the PHDX4417 itself is a mechanical installation accessory. The kit's RCD designation identifies the intended equipment arrangement; it does not establish that an RCD is supplied or that the kit independently provides residual current protection. The exact compatible RCD type, circuit breaker variant and installation components must be verified against ABB's technical documentation.
The withdrawable configuration is another important selection characteristic. Withdrawable circuit breaker assemblies have specific mechanical and connection requirements that differ from fixed and plug-in arrangements. Panel builders should therefore confirm the appropriate withdrawable components, mounting interfaces, operating clearances and associated accessories before installation.
The specified 800 mm width identifies the nominal switchboard installation configuration rather than the confirmed physical width of the kit itself. The exact compartment dimensions, fixing positions, front plate requirements and permitted equipment combinations should be checked using the applicable ABB System pro E Power assembly instructions.
The PHDX4417 does not independently provide overcurrent protection, short-circuit protection, residual current protection or an ingress-protection rating. These characteristics depend on the selected circuit breaker, the installed RCD and the complete, correctly designed and verified switchboard assembly.
Typical Applications
- ABB System pro E Power modular electrical distribution switchboards.
- Horizontal installation of compatible ABB Tmax XT4 circuit breakers.
- Designated 4-pole Tmax XT4 withdrawable installations.
- Switchboard arrangements incorporating a compatible residual current device.
- Low-voltage electrical distribution assemblies requiring the specified XT4 and RCD configuration.
- Compatible switchboard compartments with a nominal 800 mm width.
- Industrial electrical power distribution cabinets.
- Commercial building low-voltage distribution systems.
- Main and secondary electrical distribution switchboards.
- OEM switchboard manufacturing and professional electrical panel building.
- Maintenance and replacement of matching ABB System pro E Power mounting accessories.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ002447B0000 |
| SKU / MPN | 1STQ002447B0000 |
| Manufacturer description | XT4 KIT 4P WITH.+RCD. HOR.INST. W=800MM |
| Product type | Circuit breaker installation kit |
| Accessory category | Switchboard circuit breaker mounting accessories |
| Associated circuit breaker family | ABB Tmax XT4 |
| Associated pole configuration | 4-pole |
| Circuit breaker installation configuration | Withdrawable |
| Associated device configuration | With RCD |
| RCD meaning | Residual current device |
| Installation orientation | Horizontal |
| Nominal switchboard width | 800 mm |
| Compatible enclosure system | ABB System pro E Power |
| Application | Horizontal installation of compatible ABB Tmax XT4 4-pole withdrawable circuit breaker arrangements with RCD |
| Installation type | Mechanical integration into a compatible modular electrical enclosure |
| Product function | Supporting the specified Tmax XT4 circuit breaker and RCD installation arrangement |
Frequently Asked Questions
What is the ABB PHDX4417 (1STQ002447B0000) used for?
The ABB PHDX4417 is a circuit breaker installation kit designed for the horizontal mounting of a compatible ABB Tmax XT4 4-pole withdrawable circuit breaker arrangement with RCD within an ABB System pro E Power switchboard.
Which circuit breaker configuration is specified for the ABB PHDX4417?
The PHDX4417 is specified for a compatible ABB Tmax XT4 4-pole withdrawable circuit breaker arrangement with RCD. The exact breaker version, residual current device and associated mounting components should be confirmed against ABB's technical documentation.
What does WITH.+RCD mean in the ABB PHDX4417 description?
WITH. identifies the withdrawable circuit breaker configuration, while +RCD indicates an installation arrangement incorporating a residual current device. These designations describe the intended equipment configuration and do not independently confirm that the circuit breaker or RCD is included in the kit.
What switchboard width is specified for the ABB PHDX4417?
The PHDX4417 is specified for a nominal 800 mm switchboard width. This describes the intended installation configuration rather than the confirmed physical width of the kit itself.
Does the ABB PHDX4417 include a Tmax XT4 circuit breaker or RCD?
The PHDX4417 is identified as an installation kit for a Tmax XT4 withdrawable circuit breaker arrangement with RCD, not as a complete protective device assembly. The inclusion of a circuit breaker, RCD, withdrawable base or associated connection accessories is not established by the abbreviated specification and should be confirmed with the supplier.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides coordinated enclosure and circuit breaker installation accessories for professional low-voltage electrical distribution switchboards. The PHDX4417 supports the horizontal installation of compatible ABB Tmax XT4 4-pole withdrawable circuit breaker arrangements with RCD within designated 800 mm wide switchboard configurations.
