1STQ002445B0000 ABB PHDX4410 XT4 Withdrawable Kit 3-4P Horizontal Installation 800mm System Pro E Power

Why Choose the ABB PHDX4410 XT4 Withdrawable Installation Kit?

The ABB PHDX4410, manufacturer order code 1STQ002445B0000, is a dedicated XT4 withdrawable circuit breaker installation kit from the ABB System Pro E Power product group. Identified by the manufacturer designation XT4 KIT 3-4P WITHDRAW. HOR.INS. W=800MM, this accessory is specified for compatible 3-pole and 4-pole XT4 circuit breaker arrangements requiring horizontal installation in an electrical distribution assembly with a width of 800 mm.

Withdrawable circuit breaker configurations are used in electrical distribution systems where the switching device is designed to operate within a dedicated withdrawal arrangement. The ABB PHDX4410 XT4 Kit supports the installation of compatible withdrawable XT4 equipment within the corresponding System Pro E Power assembly configuration.

With its specified horizontal installation orientation, 3-4P pole configuration and 800 mm assembly width, the ABB PHDX4410 provides a manufacturer-identified installation solution for professional switchboard construction and low-voltage power distribution projects. Its unique ABB order code 1STQ002445B0000 supports accurate specification, procurement and replacement-part identification.

Key Advantages

• Genuine ABB XT4 installation kit from the System Pro E Power product group.
• Specifically designated for withdrawable XT4 circuit breaker arrangements.
• Supports compatible 3-pole and 4-pole circuit breaker configurations.
• Dedicated horizontal installation arrangement.
• Specified for electrical distribution assemblies with a width of 800 mm.
• Provides a manufacturer-defined installation accessory for compatible XT4 equipment.
• Supports organised integration of circuit breaker equipment within low-voltage switchboards.
• Suitable for professional electrical panel building, installation and refurbishment.
• Helps distinguish withdrawable installation arrangements from fixed circuit breaker configurations.
• ABB order code 1STQ002445B0000 enables accurate identification and procurement.

Key Features

• ABB PHDX4410 XT4 Installation Kit.
• Manufacturer order code: 1STQ002445B0000.
• Product group: System Pro E Power.
• Manufacturer designation: XT4 KIT 3-4P WITHDRAW. HOR.INS. W=800MM.
• XT4 circuit breaker family reference.
• 3-4P designation for 3-pole and 4-pole configurations.
• Withdrawable circuit breaker installation arrangement.
• Horizontal installation orientation.
• 800 mm specified assembly width.
• Dedicated installation kit for compatible low-voltage electrical distribution assemblies.
• Manufacturer-specific accessory for switchboard construction and equipment integration.
• Clearly identified by the ABB PHDX4410 model and 1STQ002445B0000 order code.

Technical Specifications

• Manufacturer: ABB
• Product group: System Pro E Power
• Model: PHDX4410
• Product designation: XT4 KIT 3-4P WITHDRAW. HOR.INS. W=800MM
• Manufacturer order code: 1STQ002445B0000
• Product type: Circuit breaker installation kit
• Product category: Low-voltage switchgear installation accessories
• Circuit breaker family: XT4
• Pole configuration: 3-pole or 4-pole
• Circuit breaker arrangement: Withdrawable
• Installation orientation: Horizontal
• Specified assembly width: 800 mm
• Equipment compatibility: Manufacturer-specified ABB XT4 withdrawable circuit breaker arrangements
• Product family: ABB System Pro E Power
• Application: Low-voltage electrical distribution panel assembly and circuit breaker installation
• Manufacturer identification: ABB PHDX4410 / 1STQ002445B0000

Horizontal XT4 Withdrawable Circuit Breaker Installation for 800 mm Assemblies

Low-voltage electrical distribution assemblies require installation accessories that correspond to the specific protective devices and mechanical configurations used within the switchboard. Circuit breaker installation kits are selected according to the breaker family, number of poles, installation orientation and the structural arrangement of the associated enclosure.

The ABB PHDX4410 XT4 Installation Kit is specifically identified for withdrawable XT4 circuit breakers. Unlike a fixed circuit breaker installation, a withdrawable arrangement incorporates a dedicated mechanical interface that allows the switching device to be withdrawn according to the design of the associated equipment.

Withdrawable arrangements can support maintenance and equipment servicing procedures where the complete switching assembly has been designed for this purpose. However, the exact withdrawal positions, operating sequence and isolation characteristics depend on the circuit breaker and its associated equipment, rather than on the installation kit designation alone.

The manufacturer designation 3-4P identifies the intended compatibility references for 3-pole and 4-pole XT4 configurations. The exact circuit breaker version, withdrawal mechanism and associated installation accessories must be checked against ABB technical documentation before selecting the kit.

The HOR.INS. designation identifies a horizontal installation arrangement. Correct orientation is important because the position of the circuit breaker must correspond to the intended mechanical support, connection interfaces, operating clearances and equipment access requirements.

The specified 800 mm width is another important selection characteristic. This dimension refers to the intended electrical distribution assembly width and should not be interpreted as the physical width of the installation kit itself.

The ABB PHDX4410 is therefore a configuration-specific installation accessory rather than a universal XT4 mounting kit. Panel builders should verify the complete equipment arrangement, including the switchboard structure, circuit breaker version, withdrawal components and required mounting positions.

Professional ABB System Pro E Power Circuit Breaker Integration

The ABB System Pro E Power product group supports the construction of professional low-voltage electrical distribution assemblies. Selecting the correct installation kit helps ensure that the mechanical arrangement corresponds to the specified circuit breaker and switchboard configuration.

The ABB PHDX4410 provides a manufacturer-identified accessory for compatible XT4 withdrawable arrangements. Its model number and order code help distinguish it from installation kits designed for fixed circuit breakers, other XT circuit breaker sizes, different installation orientations or alternative assembly widths.

The supplied manufacturer specification does not establish the kit's individual components, supplied mounting hardware, material, overall dimensions, electrical ratings or compatible XT4 catalogue variants. It also does not confirm that the XT4 circuit breaker, withdrawal mechanism or associated electrical connections are included. These details must be verified using the applicable ABB technical drawings, installation instructions and bill of materials.

Installation should be carried out by appropriately qualified personnel. The completed assembly must maintain the necessary mechanical integrity, electrical clearances, protective measures and operating accessibility. Where applicable, the complete low-voltage switchgear assembly should be designed and verified in accordance with BS EN IEC 61439 and the relevant ABB requirements.

For maintenance or replacement projects, the existing installation arrangement should be checked against ABB order code 1STQ002445B0000 to ensure that the correct withdrawable, horizontal, 800 mm configuration is selected.

Typical Applications

• Compatible ABB System Pro E Power low-voltage distribution assemblies.
• Horizontal installation of compatible ABB XT4 withdrawable circuit breakers.
• 3-pole XT4 withdrawable circuit breaker mounting arrangements.
• 4-pole XT4 withdrawable circuit breaker mounting arrangements.
• Electrical switchboards with the specified 800 mm assembly width.
• Industrial low-voltage power distribution panels.
• Commercial building electrical distribution systems.
• Professional electrical switchboard construction and panel building.
• Integration of compatible withdrawable circuit breaker equipment.
• Maintenance, refurbishment and replacement of corresponding ABB XT4 installation kits.