Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHDX2427 System pro E power horizontal installation kit for compatible Tmax XT2 3-pole and 4-pole plug-in moulded case circuit breakers, specified for an RHD mounting configuration and 800 mm switchboard width.
£169.03
The ABB PHDX2427 is a dedicated Tmax XT2 plug-in horizontal installation kit from the ABB System pro E power range of modular low-voltage switchboard accessories. Designed for compatible ABB Tmax XT2 3-pole and 4-pole moulded case circuit breakers, this kit supports a plug-in installation arrangement with an RHD configuration in switchboard assemblies specified for an 800 mm width.
ABB System pro E power provides a modular platform for constructing low-voltage electrical distribution switchboards using coordinated enclosure structures, circuit breaker mounting accessories and internal installation components. The PHDX2427 is intended for applications requiring a dedicated horizontal mounting solution for the Tmax XT2 circuit breaker family, rather than a conventional fixed installation arrangement.
The manufacturer designation XT2 KIT 3-4P PLUG IN RHD HOR.INS.W=800MM identifies the principal configuration requirements: Tmax XT2 compatibility, 3-pole or 4-pole equipment, plug-in installation, RHD configuration, horizontal installation and 800 mm switchboard width. The official ABB order code is 1STQ002434B0000.
Correct circuit breaker mounting is an important part of low-voltage switchboard construction. The selected installation arrangement must accommodate the circuit breaker frame, pole configuration, electrical connections, operating accessories and the mechanical requirements of the completed assembly.
The ABB PHDX2427 plug-in horizontal installation kit is intended for compatible Tmax XT2 3-pole and 4-pole circuit breakers within an 800 mm wide System pro E power switchboard configuration. Its manufacturer designation also specifies an RHD arrangement, which must correspond to the selected ABB mounting configuration.
Plug-in moulded case circuit breaker arrangements differ from fixed installations because they use a dedicated plug-in connection system. This can support circuit breaker removal and replacement according to the equipment manufacturer's prescribed procedures. The appropriate plug-in circuit breaker version, connection components and installation accessories must therefore be selected as a coordinated system.
ABB Tmax XT2 belongs to the Tmax XT family of low-voltage moulded case circuit breakers used for circuit protection and power distribution. The available protection functions, rated current and breaking capacity depend on the selected XT2 circuit breaker and trip unit. The PHDX2427 itself does not determine these electrical characteristics.
The horizontal installation arrangement allows the circuit breaker to be positioned in the orientation specified for this accessory. The 800 mm width designation identifies the corresponding switchboard configuration and should not be interpreted as the external width of the installation kit itself.
The PHDX2427 is a mechanical installation accessory, not a complete circuit breaker, plug-in base or protective switching assembly. The exact supplied components and the meaning of the RHD designation in the completed installation should be checked against the relevant ABB assembly instructions. Installation must also account for electrical clearances, connection arrangements, thermal requirements and the applicable IEC/EN 61439 requirements for the complete switchboard assembly.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ002434B0000 |
| Manufacturer designation | XT2 KIT 3-4P PLUG IN RHD HOR.INS.W=800MM |
| Product type | Circuit breaker installation kit |
| Accessory category | MCCB mounting and installation accessories |
| Compatible circuit breaker series | ABB Tmax XT2 |
| Compatible device type | Moulded case circuit breaker (MCCB) |
| Compatible pole configurations | 3-pole / 4-pole |
| Circuit breaker installation type | Plug-in |
| Mounting orientation | Horizontal |
| Installation configuration | RHD |
| Compatible switchboard width | 800 mm |
| System compatibility | ABB System pro E power |
| Application | Horizontal installation of compatible plug-in Tmax XT2 circuit breakers |
| Installation location | Compatible System pro E power switchboard compartments |
| Product classification | Mechanical switchboard installation accessory |
The ABB PHDX2427 is a horizontal installation kit for compatible ABB Tmax XT2 3-pole and 4-pole plug-in moulded case circuit breakers. It is designed for the specified RHD arrangement within an 800 mm wide ABB System pro E power switchboard configuration.
The PHDX2427 is specifically designated for ABB Tmax XT2 circuit breakers in 3-pole and 4-pole plug-in configurations. The selected breaker and associated connection components must match the intended RHD horizontal installation arrangement.
The PHDX2427 is specified for plug-in circuit breaker installation. It should not be treated as interchangeable with a fixed-installation kit without confirmation from the relevant ABB System pro E power documentation.
The manufacturer designation specifies an 800 mm switchboard width. This is the intended enclosure configuration and does not necessarily represent the physical width of the individual kit components.
RHD is the configuration identifier stated in the ABB product designation. The exact arrangement associated with this identifier should be confirmed using the applicable ABB System pro E power installation drawings before selecting or installing the kit.
The PHDX2427 is specifically designated for horizontal installation of compatible plug-in Tmax XT2 circuit breakers. A different mounting orientation may require another ABB installation kit.
The PHDX2427 is identified as a circuit breaker installation kit, not a complete Tmax XT2 circuit breaker. The circuit breaker and any required plug-in connection equipment should be selected according to the complete installation specification unless their inclusion is explicitly confirmed by the supplier.
The manufacturer designation specifically identifies Tmax XT2. Compatibility with XT1, XT3, XT4 or other circuit breaker frames should not be assumed, as these devices can require different mounting arrangements and installation accessories.
The official ABB order code is 1STQ002434B0000. This identifies the PHDX2427 Tmax XT2 3/4-pole plug-in horizontal installation kit for the specified RHD configuration and 800 mm switchboard width.
ABB System pro E power installation accessories support coordinated integration of circuit protection equipment within modular electrical distribution assemblies. The PHDX2427 provides a dedicated horizontal mounting solution for compatible Tmax XT2 3-pole and 4-pole plug-in circuit breakers, supporting organised switchboard construction in the specified RHD and 800 mm width configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.