Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002433B0000 ABB PHDX2405 System pro E Power Tmax XT2 3/4P Fixed RHD Horizontal Installation Kit W800
ABB PHDX2405 (1STQ002433B0000) System pro E Power horizontal installation kit for compatible ABB Tmax XT2 3-pole or 4-pole fixed circuit breakers, specified for the manufacturer’s RHD configuration in a nominal 800 mm wide switchboard arrangement.
£163.99
Why Choose the ABB PHDX2405 System pro E Power Tmax XT2 Horizontal Installation Kit?
The ABB PHDX2405 (1STQ002433B0000) is a dedicated horizontal circuit breaker installation kit designed for compatible low-voltage electrical distribution switchboards. Part of the ABB System pro E Power range, this accessory is specified for the installation of an ABB Tmax XT2 circuit breaker in designated 3-pole or 4-pole fixed configurations within an 800 mm wide switchboard arrangement.
Identified by ABB as XT2 KIT 3-4P FIXED RHD HOR.INST.W=800MM, the PHDX2405 provides a manufacturer-specific mounting solution for selected ABB Tmax XT2 installations. Its designation combines several important selection characteristics: Tmax XT2 compatibility, 3-pole or 4-pole construction, a fixed circuit breaker arrangement, RHD configuration and horizontal installation.
The ABB PHDX2405 supports coordinated circuit breaker positioning within compatible System pro E Power switchboard assemblies. Designed for professional electrical panel builders, switchboard manufacturers and industrial system integrators, it helps identify the appropriate installation accessory for a designated 800 mm nominal-width circuit breaker compartment.
Key Advantages
- Genuine ABB System pro E Power circuit breaker installation accessory.
- Designed for compatible ABB Tmax XT2 circuit breaker installations.
- Supports designated 3-pole and 4-pole circuit breaker configurations.
- Specified for fixed-mounted Tmax XT2 arrangements.
- Designed for a horizontal installation orientation.
- Identified for the manufacturer's RHD installation configuration.
- Suitable for compatible switchboard arrangements with a nominal 800 mm width.
- Provides a dedicated ABB mounting solution for selected Tmax XT2 assemblies.
- Supports coordinated equipment positioning within modular low-voltage distribution switchboards.
- Helps panel builders select installation components according to the required breaker configuration.
- Suitable for professional switchboard manufacturing, electrical panel construction and maintenance.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PHDX2405 manufacturer product designation.
- 1STQ002433B0000 ABB order code.
- Specified for compatible ABB Tmax XT2 circuit breakers.
- Supports designated 3-pole and 4-pole installations.
- Fixed circuit breaker mounting configuration.
- Horizontal installation arrangement.
- RHD manufacturer configuration designation.
- 800 mm nominal switchboard width.
- Intended for mechanical integration into compatible low-voltage electrical distribution assemblies.
- Designed for use with selected ABB System pro E Power structural and mounting components.
- Dedicated installation accessory for professional ABB Tmax XT2 switchboard applications.
Horizontal Installation of ABB Tmax XT2 Fixed Circuit Breakers
Circuit breaker installation kits are important components of modular low-voltage switchboard construction. Selecting the appropriate mounting accessory requires consideration of the circuit breaker family, pole configuration, installation method, compartment dimensions and any manufacturer-specific mounting arrangements.
The ABB PHDX2405 is specifically designated for horizontal installation of compatible ABB Tmax XT2 fixed circuit breakers. The manufacturer's specification covers designated 3-pole and 4-pole versions, making the kit relevant to selected electrical distribution assemblies that use these Tmax XT2 configurations.
The specified 800 mm width identifies the nominal switchboard installation arrangement. It should not be interpreted as the confirmed physical width of the mounting kit itself. The precise mounting positions, compartment requirements, fixing points and permitted circuit breaker combinations must be verified using ABB's applicable System pro E Power technical documentation.
An important selection characteristic is the RHD designation included in the manufacturer's description. This identifies a particular installation configuration, but the abbreviated specification alone does not fully define its mechanical details. Panel builders should confirm the exact RHD arrangement and any associated mounting, connection or operating requirements before selecting the accessory.
The PHDX2405 is intended for a fixed circuit breaker installation and should not be assumed to be interchangeable with accessories intended for plug-in or withdrawable versions. The kit is a mechanical installation accessory and does not independently provide overcurrent protection, short-circuit protection or an ingress-protection rating. These characteristics depend on the selected circuit breaker and the complete, correctly assembled and verified switchboard.
Typical Applications
- ABB System pro E Power modular electrical distribution switchboards.
- Horizontal installation of compatible ABB Tmax XT2 circuit breakers.
- Designated 3-pole and 4-pole Tmax XT2 mounting arrangements.
- Low-voltage switchboards using fixed-mounted circuit breakers.
- Switchboard configurations requiring the manufacturer's RHD arrangement.
- Compatible electrical enclosures with a nominal 800 mm width.
- Industrial electrical power distribution cabinets.
- Commercial building low-voltage distribution systems.
- Main and secondary electrical distribution boards.
- OEM switchboard manufacturing and professional electrical panel building.
- Maintenance and replacement of matching ABB System pro E Power mounting accessories.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ002433B0000 |
| SKU / MPN | 1STQ002433B0000 |
| Manufacturer description | XT2 KIT 3-4P FIXED RHD HOR.INST.W=800MM |
| Product type | Circuit breaker installation kit |
| Accessory category | Switchboard circuit breaker mounting accessories |
| Associated circuit breaker family | ABB Tmax XT2 |
| Associated pole configurations | 3-pole / 4-pole |
| Circuit breaker installation configuration | Fixed |
| Installation orientation | Horizontal |
| Manufacturer configuration designation | RHD |
| Nominal switchboard width | 800 mm |
| Compatible enclosure system | ABB System pro E Power |
| Application | Horizontal installation of compatible ABB Tmax XT2 fixed circuit breakers |
| Installation type | Mechanical integration into a compatible modular electrical enclosure |
| Product function | Supporting the designated Tmax XT2 circuit breaker mounting arrangement |
Frequently Asked Questions
What is the ABB PHDX2405 (1STQ002433B0000) used for?
The ABB PHDX2405 is a circuit breaker installation kit designed for the horizontal mounting of compatible ABB Tmax XT2 fixed circuit breakers within ABB System pro E Power switchboards. It is specified for designated 3-pole and 4-pole configurations.
Which circuit breakers are compatible with the ABB PHDX2405?
The PHDX2405 is specified for designated ABB Tmax XT2 3-pole and 4-pole fixed circuit breaker installations. Compatibility with a particular breaker version and its associated connection or operating accessories should be confirmed against ABB's technical documentation.
What does RHD mean in the ABB PHDX2405 description?
RHD is a manufacturer configuration designation included in the PHDX2405 specification. The abbreviated description does not fully define its mechanical requirements, so the exact RHD arrangement should be confirmed using ABB's applicable installation and assembly documentation.
What switchboard width is specified for the ABB PHDX2405?
The PHDX2405 is specified for a nominal 800 mm switchboard width. This describes the intended installation configuration rather than the confirmed physical width of the kit itself.
Does the ABB PHDX2405 include a Tmax XT2 circuit breaker?
The PHDX2405 is identified as an installation kit for ABB Tmax XT2 circuit breakers, not as a complete circuit breaker package. The circuit breaker and any separately required connection, operating or installation accessories should be selected independently unless the supplier explicitly confirms their inclusion.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power provides coordinated enclosure and circuit breaker installation accessories for professional low-voltage electrical distribution switchboards. The PHDX2405 supports the horizontal installation of compatible ABB Tmax XT2 3-pole or 4-pole fixed circuit breakers within designated 800 mm wide switchboard configurations using the manufacturer's RHD arrangement.
