Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002428B0000 ABB PHDX1407 XT1 3-4P Plug-In Horizontal Installation Kit 800mm
ABB PHDX1407 1STQ002428B0000 is a System Pro E Power installation kit for compatible XT1 three-pole and four-pole plug-in circuit breaker arrangements, specified for horizontal installation in an 800 mm-wide switchboard configuration.
£166.31
Why Choose the ABB PHDX1407 XT1 Plug-In Horizontal Installation Kit – 800 mm?
The ABB PHDX1407 XT1 Kit 3-4P Plug-In Horizontal Installation W=800MM (1STQ002428B0000) is a dedicated circuit breaker installation accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. Identified by the manufacturer's description XT1 KIT 3-4P PLUG IN HOR.INST.W=800MM, this kit is intended for a specific horizontal installation arrangement involving ABB XT1 equipment in a designated 800 mm-wide switchboard configuration.
As part of the ABB System Pro E Power range, the PHDX1407 supports the integration of compatible circuit breaker equipment into modular electrical distribution switchboards. Its designation identifies an XT1 installation kit for 3-pole or 4-pole plug-in configurations, helping panel builders select the appropriate mechanical installation accessories for the specified equipment arrangement.
The horizontal installation designation is particularly important when configuring switchgear assemblies. Circuit breaker mounting arrangements can vary according to the device family, pole configuration, connection method and available enclosure space. The ABB PHDX1407 is specifically identified for horizontal installation and should be matched to the relevant System Pro E Power assembly drawings.
With product reference PHDX1407 and ABB order code 1STQ002428B0000, this accessory provides precise manufacturer identification for professional switchboard construction, maintenance and approved replacement applications. It is an installation kit rather than a complete circuit breaker, and the exact supplied components should be verified against ABB's product documentation.
Key Advantages
- Purpose-designed ABB System Pro E Power XT1 installation kit for compatible switchgear assemblies.
- Specified for ABB XT1 circuit breaker arrangements.
- Supports designated 3-pole and 4-pole configurations.
- Identified for plug-in circuit breaker installation.
- Designed for a manufacturer-specified horizontal installation arrangement.
- Suitable for compatible switchboard configurations with a designated width of 800 mm.
- Supports the mechanical integration of circuit breaker equipment into modular electrical distribution assemblies.
- Helps panel builders select accessories according to the intended device and mounting configuration.
- Suitable for professional low-voltage switchgear manufacturing and assembly.
- Provides a manufacturer-specific reference for approved maintenance and replacement.
- Clearly identified by ABB order code 1STQ002428B0000.
- Part of the established ABB System Pro E Power enclosure and switchgear accessory range.
Key Features
- Manufacturer: ABB.
- Product reference: PHDX1407.
- ABB order code: 1STQ002428B0000.
- Manufacturer description: XT1 KIT 3-4P PLUG IN HOR.INST.W=800MM.
- Product group: System Pro E Power.
- Component type: Circuit breaker installation kit.
- Associated device designation: XT1.
- Pole configurations: 3P and 4P.
- Installation configuration: Plug-in.
- Mounting orientation: Horizontal.
- Designated switchboard width: 800 mm.
- Intended for compatible ABB System Pro E Power switchgear assemblies.
- Supports manufacturer-specified circuit breaker mounting arrangements.
- Suitable for original switchboard construction and approved replacement applications.
- Requires confirmation of the associated XT1 device and installation configuration.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Product reference: PHDX1407
- ABB order code: 1STQ002428B0000
- Product name: ABB PHDX1407 XT1 Plug-In Horizontal Installation Kit – 800 mm
- Manufacturer description: XT1 KIT 3-4P PLUG IN HOR.INST.W=800MM
- Product type: Circuit breaker installation kit
- Accessory category: Low-voltage switchgear circuit breaker mounting accessory
- Product family: System Pro E Power
- Associated circuit breaker designation: XT1
- Supported pole designations: 3P / 4P
- Connection arrangement: Plug-in
- Installation orientation: Horizontal
- Designated enclosure width: 800 mm
- Primary function: Installation of compatible XT1 circuit breaker equipment within a specified switchgear configuration
- Associated equipment: ABB System Pro E Power low-voltage switchboards
- Equipment compatibility: Configurations specifying ABB PHDX1407
- Mounting arrangement: According to the applicable ABB assembly instructions
- Product classification: Circuit breaker installation and switchgear mounting accessory
- Application: Low-voltage electrical distribution switchboard construction and maintenance
ABB XT1 Plug-In Circuit Breaker Installation in System Pro E Power
The ABB System Pro E Power range provides modular solutions for constructing low-voltage electrical distribution switchboards. These assemblies accommodate switching and protective equipment alongside busbars, connection systems, mounting structures, internal separation components and enclosure accessories selected according to the required electrical design.
The ABB PHDX1407 is identified as an installation kit associated with the XT1 circuit breaker designation. ABB XT1 is associated with the Tmax XT moulded-case circuit breaker family. However, the exact circuit breaker variant and its compatibility with this kit must be confirmed from the applicable ABB configuration documentation.
The manufacturer's 3-4P designation identifies arrangements involving three-pole or four-pole circuit breaker equipment. These configurations may be selected according to the electrical distribution system and protection requirements. The installation kit itself does not determine the circuit breaker's rated current, breaking capacity or protection functions.
The term plug-in identifies the intended circuit breaker connection configuration. Plug-in arrangements are distinct from fixed and withdrawable equipment configurations, and the associated installation components must match the specified device design. The ABB PHDX1407 should therefore not be assumed to suit every XT1 circuit breaker version.
The horizontal installation designation indicates the intended mounting orientation within the switchgear assembly. Correct orientation matters because the surrounding mounting structure, device connections, access arrangements and internal clearances must correspond to the manufacturer's approved configuration.
The manufacturer's description also specifies W=800MM, identifying an 800 mm switchboard width parameter. This should be treated as an enclosure configuration requirement rather than a measurement of the individual installation kit. The actual dimensions and mounting-hole positions of the supplied components should be checked against the relevant ABB drawings.
Mechanical installation accessories help position circuit breakers within the intended switchgear layout. However, the installation kit should not be assumed to include the circuit breaker, plug-in base, electrical terminals, busbar connections, protective devices or all associated fixing components unless these are explicitly confirmed by ABB's supply documentation.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. Circuit breakers may be subject to applicable product standards such as BS EN IEC 60947-2. The complete assembly must be assessed for relevant characteristics including electrical clearances, temperature rise, short-circuit withstand and protective circuit continuity.
Using a correctly specified installation kit is one part of the overall switchgear design. The ABB PHDX1407 does not independently establish an electrical current rating, short-circuit rating, ingress protection classification or form of internal separation. These characteristics depend on the associated circuit breaker and the verified switchgear assembly.
For new installations or replacement work, confirm the PHDX1407 product reference, ABB order code 1STQ002428B0000, XT1 device configuration, 3P/4P plug-in arrangement, horizontal mounting orientation and 800 mm switchboard width against the applicable System Pro E Power assembly documentation.
Typical Applications
- ABB System Pro E Power low-voltage switchgear assemblies.
- Compatible ABB XT1 circuit breaker installation arrangements.
- Three-pole plug-in circuit breaker mounting configurations.
- Four-pole plug-in circuit breaker mounting configurations.
- Horizontal circuit breaker installation in compatible switchboards.
- Electrical distribution assemblies with a designated width of 800 mm.
- Industrial low-voltage electrical distribution panels.
- Commercial building electrical switchboards.
- Main and sub-distribution switchgear construction.
- OEM electrical panel manufacturing and assembly.
- System Pro E Power switchgear refurbishment projects.
- Manufacturer-approved circuit breaker installation kit replacement.
Frequently Asked Questions
What is the ABB PHDX1407 1STQ002428B0000 used for?
The ABB PHDX1407 is an installation kit for compatible XT1 3-pole or 4-pole plug-in circuit breaker arrangements within ABB System Pro E Power switchgear. It is specified for horizontal installation in a designated 800 mm-wide configuration.
What is the ABB order code for the PHDX1407 installation kit?
The ABB order code is 1STQ002428B0000. The product reference is PHDX1407, and the product belongs to the ABB System Pro E Power group.
Which circuit breaker is the ABB PHDX1407 designed for?
The manufacturer's description identifies the kit for the ABB XT1 circuit breaker designation. Compatibility with a particular XT1 model, release type or device version must be confirmed using the relevant ABB installation and configuration documentation.
What does 3-4P mean in the ABB PHDX1407 description?
3-4P indicates three-pole and four-pole circuit breaker configurations. The kit is identified for these pole arrangements, subject to compatibility with the specified XT1 device and System Pro E Power assembly.
What does Plug-In mean for the ABB PHDX1407?
Plug-in identifies the intended circuit breaker installation and connection arrangement. It distinguishes this configuration from other mounting formats, such as fixed or withdrawable arrangements. The exact associated plug-in components should be checked against ABB's technical documentation.
What does Horizontal Installation mean in the ABB PHDX1407 specification?
The horizontal installation designation identifies the intended mounting orientation of the compatible XT1 equipment within the switchboard. The installation must follow the manufacturer's specified arrangement, including mounting positions and associated clearances.
What does W=800MM mean for the ABB PHDX1407?
W=800MM identifies a designated switchboard width of 800 mm. It does not mean that every component supplied in the installation kit measures 800 mm. Exact component dimensions should be confirmed using ABB's assembly drawings.
Does the ABB PHDX1407 include an XT1 circuit breaker?
The ABB PHDX1407 is identified as an installation kit rather than a complete circuit breaker. An XT1 circuit breaker should not be assumed to be included. Check the manufacturer's supply documentation for the exact kit contents and any separately required components.
Can the ABB PHDX1407 be used with fixed or withdrawable XT1 circuit breakers?
The manufacturer specifically identifies the PHDX1407 for a plug-in arrangement. Compatibility with fixed or withdrawable configurations should not be assumed. Select the installation kit specified for the actual circuit breaker mounting and connection type.
Does the ABB PHDX1407 determine the electrical rating of the circuit breaker?
No. The ABB PHDX1407 is an installation accessory and does not independently establish the circuit breaker's rated current, breaking capacity or protection characteristics. These depend on the selected XT1 device and the complete switchgear design.
What should be checked before ordering the ABB PHDX1407?
Confirm the ABB order code 1STQ002428B0000, product reference PHDX1407, compatible XT1 circuit breaker variant, 3P or 4P configuration, plug-in connection arrangement, horizontal installation orientation and designated 800 mm switchboard width. Check the applicable System Pro E Power parts list and kit contents before ordering.
Designed for Professional ABB System Pro E Power Switchgear Installations
ABB System Pro E Power installation accessories support the construction and maintenance of professionally engineered low-voltage electrical distribution switchboards. The ABB PHDX1407 XT1 Plug-In Horizontal Installation Kit provides a manufacturer-identified accessory for compatible 3-pole and 4-pole XT1 arrangements in designated 800 mm-wide switchboard configurations, helping panel builders and maintenance engineers select the correct installation components.
