Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSVS2573 (1STQ002383B0000) System pro E Power rear vertical segregation accessory for designated ABB Tmax T5 3-pole and 4-pole installations, specified for a nominal height of 250 mm and depth of 700 mm with the manufacturer’s P MO configuration.
£89.23
The ABB PSVS2573 (1STQ002383B0000) is a dedicated rear vertical segregation accessory designed for compatible low-voltage electrical distribution switchboards. Part of the ABB System pro E Power range, this component is specified for a nominal 250 mm height and 700 mm depth, supporting internal separation arrangements associated with ABB Tmax T5 circuit breaker installations.
Identified by ABB as REAR V.SEG. H250 P 700 T5 3/4P P MO, the PSVS2573 is intended for rear vertical segregation in designated ABB Tmax T5 3-pole and 4-pole configurations. The manufacturer's P MO designation identifies a specific installation variant that must be matched to the corresponding ABB assembly documentation.
The ABB PSVS2573 provides a manufacturer-specific segregation solution for professional electrical panel builders working with compatible System pro E Power switchboards. Its 250 mm high and 700 mm deep application format helps distinguish this accessory from other rear segregation components intended for different compartment dimensions or circuit breaker arrangements.
Internal segregation is an important consideration in the design of low-voltage electrical distribution switchboards. Depending on the complete assembly configuration, separation accessories help define internal sections and support the intended arrangement of circuit breakers, connections and adjacent switchboard components.
The ABB PSVS2573 is specifically designated for rear vertical segregation associated with compatible ABB Tmax T5 3-pole and 4-pole installations. Its nominal 250 mm height and 700 mm depth identify the intended switchboard application. These are configuration dimensions and should not be interpreted as verified physical measurements of the accessory itself.
The manufacturer's P MO designation is an important selection detail. It identifies a particular T5 installation arrangement, but the abbreviated description alone does not establish the full mechanical configuration or the components supplied. Panel builders should confirm the applicable circuit breaker version, mounting arrangement and associated segregation accessories using ABB's technical documentation.
The PSVS2573 is one element of a complete switchboard segregation system. Installing this accessory alone does not establish a particular IEC 61439 form of internal separation, ingress-protection rating or electrical safety classification. These characteristics depend on the complete switchboard design, the installation of all required components and verification of the finished assembly.
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ002383B0000 |
| SKU / MPN | 1STQ002383B0000 |
| Manufacturer description | REAR V.SEG. H250 P 700 T5 3/4P P MO |
| Product type | Rear vertical segregation accessory |
| Accessory category | Switchboard internal segregation components |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Nominal segregation height | 250 mm |
| Nominal application depth | 700 mm |
| Associated circuit breaker family | ABB Tmax T5 |
| Associated pole configurations | 3-pole / 4-pole |
| Manufacturer installation designation | P MO |
| Application | Rear vertical segregation for designated Tmax T5 installations |
| Compatible enclosure system | ABB System pro E Power |
| Installation type | Mechanical integration into a compatible switchboard assembly |
| Product function | Internal rear vertical separation within the specified circuit breaker installation arrangement |
The ABB PSVS2573 is a rear vertical segregation accessory designed for compatible ABB System pro E Power low-voltage switchboards. It is specified for designated ABB Tmax T5 3-pole and 4-pole circuit breaker installation arrangements.
The PSVS2573 is specified for a nominal 250 mm height and 700 mm application depth. These values identify the intended switchboard configuration rather than confirmed physical measurements of the individual accessory components.
The PSVS2573 is designated for compatible ABB Tmax T5 installations in 3-pole and 4-pole configurations. The exact breaker version and mounting arrangement must match ABB's applicable assembly documentation.
P MO is part of ABB's manufacturer designation for the specified Tmax T5 installation arrangement. The abbreviated product description does not fully define this configuration, so its precise meaning and associated equipment requirements should be verified against ABB's technical documentation before selection.
Not independently. The PSVS2573 is an internal segregation accessory, but a particular IEC 61439 form of separation depends on the complete switchboard design and assembly. The required separation arrangement must be verified using the relevant ABB system documentation and assembly instructions.
ABB System pro E Power provides coordinated enclosure, mounting and segregation accessories for professional low-voltage electrical distribution switchboards. The PSVS2573 supports rear vertical internal separation in compatible ABB Tmax T5 3-pole and 4-pole installations through its designated 250 mm high, 700 mm deep application format and manufacturer-specific P MO configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.