Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSVS2553 System pro E Power rear vertical segregation component for compatible Tmax T5 three-pole and four-pole circuit breaker arrangements, specified for 250 mm height and 500 mm switchboard depth with the P MO configuration reference.
£87.00
The ABB PSVS2553 is a dedicated rear vertical segregation component for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Identified by ABB order code 1STQ002382B0000, this accessory is specified for a 250 mm nominal height and 500 mm nominal switchboard depth, supporting internal segregation arrangements associated with ABB Tmax T5 circuit breaker installations.
The manufacturer designation REAR V.SEG. H250 P 500 T5 3/4P P MO identifies the PSVS2553 as a rear vertical segregation accessory for compatible ABB Tmax T5 three-pole and four-pole circuit breaker configurations. The designation also includes the P MO configuration reference, which must be matched to the applicable ABB installation arrangement. Its precise interpretation and compatibility requirements should be verified against the manufacturer's technical documentation.
As part of the ABB System pro E Power modular switchboard range, the PSVS2553 supports the construction of organised internal compartment arrangements in industrial and commercial power distribution assemblies. It provides an application-specific segregation component for panel builders integrating compatible Tmax T5 protective equipment into professionally engineered low-voltage switchboards.
Low-voltage electrical distribution switchboards incorporate circuit breakers, busbar systems, cable connections and associated equipment within engineered enclosure structures. Internal segregation components help establish physical separation between designated areas of these assemblies, supporting the compartment layout and equipment arrangement specified by the switchboard designer.
The ABB PSVS2553 provides a dedicated rear vertical segregation component for compatible System pro E Power configurations associated with Tmax T5 three-pole and four-pole circuit breakers. Its specified 250 mm height and 500 mm switchboard depth identify the intended installation arrangement, while the P MO designation distinguishes the relevant manufacturer configuration.
The PSVS2553 is a mechanical segregation accessory and does not perform electrical switching, protection or motor operation independently. Its installation must follow ABB's applicable assembly instructions, including requirements for mounting positions, equipment clearances and neighbouring components. The completed switchboard's form of internal separation, ingress protection and electrical performance depend on the entire verified assembly rather than this accessory alone.
| Product model | PSVS2553 |
|---|---|
| ABB order code | 1STQ002382B0000 |
| Product series | System pro E Power |
| Product group | System pro E Power |
| Product designation | REAR V.SEG. H250 P 500 T5 3/4P P MO |
| Product type | Rear vertical segregation component |
| Product category | Switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Installation position | Rear |
| Nominal height | 250 mm |
| Nominal switchboard depth | 500 mm |
| Associated circuit breaker family | ABB Tmax T5 |
| Associated pole configurations | 3P / 4P |
| Manufacturer configuration reference | P MO |
| Primary function | Internal switchboard segregation |
| Compatible switchboard system | ABB System pro E Power |
| Application | Low-voltage electrical distribution assemblies |
The ABB PSVS2553 is a rear vertical segregation component designed for compatible ABB System pro E Power low-voltage switchboards incorporating Tmax T5 three-pole or four-pole circuit breaker arrangements.
The PSVS2553 is specified for a 250 mm nominal height and 500 mm nominal switchboard depth. These dimensions identify the intended installation configuration and should not be interpreted as the complete physical dimensions of the accessory without checking ABB's dimensional documentation.
The PSVS2553 is identified for compatible ABB Tmax T5 three-pole and four-pole circuit breaker arrangements. Its manufacturer designation also includes P MO, which must be matched to the relevant ABB assembly configuration.
No complete circuit breaker or motor operator is identified in the product designation. The PSVS2553 is a rear vertical segregation component; the required circuit breaker, operating accessories and associated installation components must be selected separately according to ABB's assembly documentation.
The PSVS2553 supports internal segregation, but the component alone does not establish a particular form of separation. The applicable classification depends on the complete switchboard construction and must be verified against ABB's approved assembly arrangements and relevant electrical standards.
ABB System pro E Power accessories support modular, organised and professionally engineered low-voltage electrical distribution assemblies. The PSVS2553 rear vertical segregation component provides an application-specific accessory for electrical engineers, industrial contractors and switchboard manufacturers integrating compatible Tmax T5 circuit breaker configurations into ABB distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.