Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSVS5092 System pro E Power rear vertical segregation component for compatible Tmax T6 three-pole and four-pole motor-operated circuit breaker arrangements, specified for 500 mm height and 900 mm switchboard depth.
£115.92
The ABB PSVS5092 is a dedicated rear vertical segregation component for compatible ABB System pro E Power low-voltage electrical distribution switchboards. Designed for an installation arrangement featuring an ABB Tmax T6 three-pole or four-pole circuit breaker with motor operation, this accessory is specified for a 500 mm height and 900 mm switchboard depth.
As part of the ABB System pro E Power modular switchboard range, the PSVS5092 supports the construction of internal separation arrangements around compatible circuit breaker installations. Rear vertical segregation components help panel builders establish defined physical boundaries between designated areas of an electrical distribution assembly, contributing to an organised switchboard layout.
The manufacturer designation REAR V.SEG.H500 P900MM T6 3/4P W MO identifies the PSVS5092 as a rear vertical segregation accessory for a Tmax T6 three-pole or four-pole motor-operated arrangement. With ABB order code 1STQ002381B0000, this component can be specified for compatible System pro E Power switchboards where the corresponding rear segregation configuration is required.
Low-voltage electrical distribution switchboards often incorporate moulded case circuit breakers, busbar systems, cable connections and associated operating equipment within a common enclosure. Internal segregation components help establish physical separation between designated areas of these assemblies, supporting the compartment arrangement defined by the switchboard designer.
The ABB PSVS5092 is intended for rear vertical segregation in compatible System pro E Power configurations incorporating Tmax T6 three-pole or four-pole circuit breakers with motor operation. Its specified 500 mm height and 900 mm switchboard depth identify the intended modular installation arrangement. The accessory supports the physical segregation layout around the relevant circuit breaker installation rather than performing any electrical switching function itself.
Motor-operated circuit breakers may form part of remotely controlled power distribution arrangements, subject to the capabilities of the selected breaker and operating mechanism. The PSVS5092 should be installed according to ABB's applicable assembly documentation, with attention to mechanical clearances, operating equipment and neighbouring switchboard components. A single segregation accessory does not independently establish a particular form of internal separation, ingress protection rating or short-circuit withstand classification; these characteristics depend on the verified complete assembly.
| Product model | PSVS5092 |
|---|---|
| ABB order code | 1STQ002381B0000 |
| Product series | System pro E Power |
| Product group | System pro E Power |
| Product designation | REAR V.SEG.H500 P900MM T6 3/4P W MO |
| Product type | Rear vertical segregation component |
| Product category | Switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Installation position | Rear |
| Nominal height | 500 mm |
| Nominal switchboard depth | 900 mm |
| Associated circuit breaker family | ABB Tmax T6 |
| Associated pole configurations | 3P / 4P |
| Associated operating arrangement | With motor operation (W MO) |
| Primary function | Internal switchboard segregation |
| Compatible switchboard system | ABB System pro E Power |
| Application | Low-voltage electrical distribution assemblies |
The ABB PSVS5092 is a rear vertical segregation component designed for compatible System pro E Power switchboards incorporating ABB Tmax T6 three-pole or four-pole circuit breakers with motor operation.
The PSVS5092 is specified for a 500 mm nominal segregation height and a 900 mm nominal switchboard depth. These values identify the intended installation configuration rather than the complete physical dimensions of every component in the assembly.
The PSVS5092 is identified for compatible ABB Tmax T6 three-pole and four-pole circuit breaker arrangements with motor operation. Exact compatibility should be confirmed using the relevant ABB System pro E Power assembly documentation.
The PSVS5092 is identified as a rear vertical segregation component, not a complete circuit breaker or motor operating mechanism. The appropriate Tmax T6 breaker and operating accessories must be selected separately according to the required ABB switchboard configuration.
The PSVS5092 supports internal segregation, but the component alone does not establish a particular form of separation. The applicable classification depends on the complete switchboard construction and must be verified against ABB's approved assembly arrangements and relevant standards.
ABB System pro E Power accessories support modular, organised and professionally engineered low-voltage electrical distribution assemblies. The PSVS5092 rear vertical segregation component provides a dedicated installation accessory for electrical engineers, industrial contractors and switchboard manufacturers integrating compatible motor-operated Tmax T6 circuit breaker arrangements into ABB distribution systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.