Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSVS5052 rear vertical segregation accessory from the System pro E power range, specified for a 500 mm height and P500 mm configuration with compatible Tmax T6 3-pole or 4-pole motor-operated circuit breaker installations.
£98.96
The ABB PSVS5052 is a rear vertical segregation accessory from the ABB System pro E power range, designed for compatible low-voltage switchboard assemblies incorporating ABB Tmax T6 3-pole or 4-pole circuit breakers. Identified by ABB order code 1STQ002379B0000, this component is specified for a 500 mm height and a 500 mm P dimension, with the product designation also identifying a motor-operated (MO) configuration.
Rear vertical segregation components help establish defined physical separation within electrical distribution assemblies. In modular switchboards, correctly selected segregation accessories contribute to organised equipment compartments and support the intended arrangement of circuit breakers, conductors and associated electrical components.
The PSVS5052 is specifically associated with Tmax T6 3/4-pole equipment in a motor-operated configuration. Its application is therefore more specialised than that of a general-purpose enclosure divider. It should be selected alongside the corresponding ABB System pro E power structural components and the intended T6 circuit breaker installation arrangement.
Internal segregation is an important consideration in the design and construction of low-voltage switchgear assemblies. Segregation components establish physical boundaries between designated parts of the installation, helping panel builders organise protective devices, electrical connections and associated equipment according to the selected switchboard design.
The ABB PSVS5052 provides a rear vertical segregation solution for the specified 500 mm high, P500 mm arrangement. Its designation identifies use with ABB Tmax T6 3-pole and 4-pole circuit breakers in the corresponding motor-operated configuration.
Motor-operated circuit breakers incorporate an operating mechanism that enables compatible electrical control of breaker operation. The installation of these devices requires consideration of the circuit breaker body, operating mechanism, electrical connections and available compartment space. A dedicated segregation accessory helps ensure that the selected internal separation arrangement corresponds to the intended equipment configuration.
ABB System pro E power is a modular platform for constructing low-voltage electrical distribution switchboards. It incorporates compatible structural components, mounting accessories and segregation arrangements that can be selected according to the switchboard layout and the installed electrical equipment.
The PSVS5052 is a mechanical segregation component, not a circuit breaker, motor operator or protective relay. Its installation does not independently establish a particular IEC/EN 61439 form of internal separation, ingress protection rating or electrical performance classification. Those characteristics depend on the complete verified assembly and its installation configuration.
For reliable integration, the panel builder should confirm the relevant ABB assembly instructions, the precise meaning of the P500 designation in the selected configuration, the Tmax T6 installation arrangement and the required clearances around the motor-operated circuit breaker.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ002379B0000 |
| Manufacturer designation | REAR V.SEG.H500 P500MM T6 3/4P W MO |
| Product type | Rear vertical segregation accessory |
| Accessory category | Low-voltage switchboard internal segregation components |
| Segregation position | Rear |
| Segregation orientation | Vertical |
| Specified height | 500 mm |
| Specified P dimension | 500 mm |
| Compatible circuit breaker family | ABB Tmax T6 |
| Compatible pole configurations | 3-pole / 4-pole |
| Associated operating configuration | Motor-operated (MO) |
| System compatibility | ABB System pro E power |
| Application | Internal segregation of compatible Tmax T6 switchboard installations |
| Component function | Physical separation within a specified switchboard compartment arrangement |
| Product classification | Mechanical switchboard segregation accessory |
The ABB PSVS5052 is a rear vertical segregation accessory for compatible ABB System pro E power switchboards incorporating Tmax T6 3-pole or 4-pole circuit breakers in the specified motor-operated arrangement.
The manufacturer designation identifies a 500 mm height and a P500 mm dimension. These values should be interpreted according to the corresponding ABB System pro E power installation drawings rather than assumed to represent the complete external dimensions of the accessory.
The PSVS5052 is identified for compatible ABB Tmax T6 circuit breakers in 3-pole and 4-pole configurations. The specific mounting and operating arrangement must also match the intended ABB switchboard installation.
MO identifies the motor-operated configuration associated with the specified Tmax T6 installation. The selected circuit breaker, motor operator and mounting arrangement must be compatible with the corresponding segregation accessory.
Rear vertical segregation refers to a physical separation arrangement positioned at the rear of a designated switchboard compartment or equipment installation. The exact boundaries and function depend on the completed ABB System pro E power assembly design.
The PSVS5052 is identified as a rear vertical segregation accessory, not a complete circuit breaker or motor operating mechanism. These electrical devices should be selected separately unless the supplier explicitly confirms their inclusion in a particular package.
The PSVS5052 contributes to physical segregation within a compatible switchboard, but the accessory alone does not establish a particular form of internal separation under IEC/EN 61439. The classification must be determined from the design and verification of the complete switchboard assembly.
The manufacturer designation specifically identifies ABB Tmax T6 3-pole and 4-pole motor-operated arrangements. Compatibility with other circuit breaker families or mounting configurations should not be assumed without confirmation from the relevant ABB technical documentation.
The official ABB order code is 1STQ002379B0000. It identifies the PSVS5052 rear vertical segregation accessory for the specified 500 mm height, P500 mm, Tmax T6 3/4-pole motor-operated arrangement.
ABB System pro E power segregation accessories support coordinated internal compartment arrangements in modular low-voltage switchboards. The PSVS5052 provides a dedicated rear vertical segregation solution for compatible Tmax T6 3-pole and 4-pole motor-operated installations, helping panel builders select the appropriate component for the specified 500 mm high, P500 mm configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.