Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PFVS2562 (1STQ002360B0000) is a System pro E Power front vertical busbar segregation accessory for 250 mm high and 600 mm wide low-voltage switchboard configurations incorporating an intermediate upright.
£90.06
The ABB PFVS2562 (1STQ002360B0000) is a front vertical busbar segregation accessory with intermediate upright provision, designed for the ABB System pro E Power range of low-voltage main distribution switchboards. Specified for a 250 mm high and 600 mm wide mounting configuration, this component supports the organised separation of busbar areas within compatible modular switchboard assemblies.
Effective internal segregation is an important consideration in professional electrical distribution panel construction. The ABB PFVS2562 vertical busbar segregation component is intended for installations requiring a front segregation arrangement in conjunction with an intermediate upright, helping panel builders establish the physical separation specified by the switchboard design.
As part of the ABB System pro E Power modular enclosure platform, the PFVS2562 provides a dedicated accessory for compatible busbar compartment arrangements. Its defined 250 mm height and 600 mm width configuration supports accurate component selection for industrial and commercial switchboards where internal compartment organisation, equipment accessibility and coordinated installation are essential.
The ABB PFVS2562 is designed for System pro E Power switchboard configurations where the vertical busbar area requires a front segregation component. Vertical busbar systems form part of the internal power distribution arrangement in many low-voltage switchboards, and their placement must be coordinated with adjacent functional units, structural supports and compartment boundaries.
The manufacturer's designation SEG.BUS.VER.FRONT.H250+INT.UP.W600 identifies the intended application: vertical busbar segregation at the front, with a 250 mm nominal height and an intermediate upright arrangement for a 600 mm nominal width. These dimensions describe the specified installation configuration rather than independently confirming the overall physical dimensions of the supplied component. The precise mounting points, fixing hardware and relationship to adjacent segregation elements should be verified against ABB's assembly documentation.
Internal segregation can support separation between busbars and other switchboard areas, but the PFVS2562 does not independently establish a particular form of separation, touch-protection rating or electrical insulation performance. These characteristics depend on the complete switchboard design, the installed segregation system and the relevant verification requirements. ABB System pro E Power assemblies may be designed and verified in accordance with IEC 61439-1 and IEC 61439-2, with final compliance assessed at assembly level.
| Product group | System pro E Power |
|---|---|
| Series | System pro E Power Main Distribution Switchboards |
| ABB order code | 1STQ002360B0000 |
| Manufacturer designation | SEG.BUS.VER.FRONT.H250+INT.UP.W600 |
| Product type | Busbar segregation accessory |
| Component category | Internal switchboard segregation components |
| Segregation application | Vertical busbar area |
| Segregation position | Front |
| Nominal configuration height | 250 mm |
| Nominal configuration width | 600 mm |
| Upright configuration | Intermediate upright |
| Mounting application | Compatible internal switchboard segregation arrangement |
| Compatible switchboard system | ABB System pro E Power |
| Application | Front segregation of vertical busbar areas in modular low-voltage switchboards |
| Installation requirement | Matching enclosure structure, intermediate upright and ABB segregation arrangement |
The ABB PFVS2562 is a front vertical busbar segregation accessory for ABB System pro E Power low-voltage main distribution switchboards. It is designed for compatible arrangements requiring segregation of the vertical busbar area with an intermediate upright.
The PFVS2562 is specified for a nominal 250 mm installation height and 600 mm installation width. These values identify the intended switchboard configuration rather than the precise overall physical dimensions of the supplied component.
The designation identifies a front vertical busbar segregation component for a 250 mm high arrangement with an intermediate upright and a 600 mm nominal width. The exact mounting configuration should be checked against ABB's System pro E Power assembly instructions.
The PFVS2562 supports physical segregation of the vertical busbar area, but it does not independently establish a particular IEC 61439 form of separation. The achieved segregation arrangement depends on the complete switchboard construction and the other installed segregation components.
No. The PFVS2562 is intended for a specific 250 mm high, 600 mm wide front vertical busbar segregation arrangement with an intermediate upright. Compatibility with the enclosure structure, busbar layout and adjacent components must be confirmed using ABB's technical documentation.
ABB System pro E Power segregation accessories support organised modular switchboard construction for industrial and commercial electrical distribution. The PFVS2562 provides a dedicated front vertical busbar segregation solution for compatible 250 mm high and 600 mm wide configurations incorporating an intermediate upright, helping electrical panel builders maintain coordinated internal compartment layouts.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.