Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS6080 (1STQ002356B0000) System pro E Power rear vertical segregation accessory for compatible low-voltage switchboards, specified for a nominal height of 600 mm and width of 800 mm in a configuration without an internal upright.
£193.79
The ABB PRVS6080 (1STQ002356B0000) is a dedicated rear vertical segregation accessory designed for compatible low-voltage electrical distribution switchboards. Part of the ABB System pro E Power range, this component is specified for a nominal 600 mm height and 800 mm width, supporting the creation of organised internal separation arrangements within modular switchboard assemblies.
Identified by ABB as SEGR.VERT.REAR H=600MM W=800MM NO I.UP., the PRVS6080 is intended for rear vertical segregation applications in a configuration without an internal upright. This manufacturer designation is an important selection detail when matching segregation accessories to the structural arrangement of a System pro E Power switchboard.
The ABB PRVS6080 offers a manufacturer-specific solution for electrical panel builders planning internal compartment separation. Its designated 600 mm high and 800 mm wide application format helps identify the correct accessory for compatible enclosure arrangements, while its rear vertical positioning distinguishes it from other segregation components in the System pro E Power range.
Internal segregation is an important consideration in the design and assembly of low-voltage electrical distribution switchboards. Depending on the overall switchboard configuration, separation components may be used to define internal sections, distinguish equipment areas and support the intended arrangement of functional units and associated electrical connections.
The ABB PRVS6080 is specifically designated for rear vertical segregation within compatible System pro E Power assemblies. Its nominal 600 mm height and 800 mm width identify the intended installation configuration. These dimensions describe the segregation application rather than verified overall physical measurements of the individual accessory components.
A key characteristic of the PRVS6080 is its NO I.UP. designation, identifying a configuration without an internal upright. This distinguishes the accessory from segregation arrangements that require an internal upright. Panel builders should verify the supporting structure, fixing arrangements and any additional segregation components required for the selected ABB switchboard configuration.
The PRVS6080 forms part of a wider internal separation arrangement and should be installed in accordance with ABB's applicable assembly instructions. The accessory alone does not establish a particular IEC 61439 form of internal separation, ingress-protection rating or electrical safety classification. These characteristics depend on the complete switchboard design, the installed components and the verification of the finished assembly.
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ002356B0000 |
| SKU / MPN | 1STQ002356B0000 |
| Manufacturer description | SEGR.VERT.REAR H=600MM W=800MM NO I.UP. |
| Product type | Rear vertical segregation accessory |
| Accessory category | Switchboard internal segregation components |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Nominal segregation height | 600 mm |
| Nominal segregation width | 800 mm |
| Internal upright configuration | Without internal upright |
| Application | Internal segregation within low-voltage electrical distribution switchboards |
| Compatible enclosure system | ABB System pro E Power |
| Installation type | Mechanical integration into a compatible switchboard assembly |
| Product function | Rear vertical separation within the designated enclosure configuration |
The ABB PRVS6080 is a rear vertical segregation accessory designed for compatible ABB System pro E Power low-voltage electrical distribution switchboards. It supports internal separation in the designated rear segregation arrangement.
The PRVS6080 is specified for a nominal 600 mm height and 800 mm width. These dimensions identify the intended segregation application rather than confirmed overall physical measurements of the individual accessory components.
The NO I.UP. designation identifies a segregation configuration without an internal upright. The exact supporting structure and any separately required mounting components should be confirmed using ABB's technical documentation.
Both products are rear vertical segregation accessories in the ABB System pro E Power range, specified for a nominal 800 mm width and a configuration without an internal upright. The PRVS6080 is designed for a nominal 600 mm height, while the PRVS5080 is designed for a nominal 500 mm height. The correct accessory should be selected according to the intended switchboard arrangement.
Not independently. The PRVS6080 is an internal segregation accessory, but a particular IEC 61439 form of separation depends on the complete switchboard design and assembly. The required segregation form must be verified against the applicable ABB system documentation and assembly requirements.
ABB System pro E Power provides coordinated enclosure, mounting and segregation accessories for professional low-voltage electrical distribution switchboards. The PRVS6080 supports rear vertical internal separation in compatible assemblies through its designated 600 mm high, 800 mm wide application format and configuration without an internal upright.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.