Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002354B0000 ABB PRVS4580 System Pro E Power Rear Vertical Segregation H450 W800 NO I.UP.
ABB PRVS4580 (1STQ002354B0000) is a System Pro E Power rear vertical segregation component for compatible low-voltage switchboard assemblies, specified for a 450 mm height, 800 mm width and NO I.UP. configuration.
£181.52
Why Choose the ABB PRVS4580 System Pro E Power Rear Vertical Segregation Panel?
The ABB PRVS4580 (1STQ002354B0000) is a dedicated rear vertical segregation component for compatible ABB System Pro E Power low-voltage switchboard assemblies. The authoritative manufacturer specification identifies the product as SEGR.VERT.REAR H=450MM W=800MM NO I.UP., confirming a rear vertical segregation arrangement with a specified 450 mm height, 800 mm width and NO I.UP. configuration designation.
Developed for use within ABB's modular switchboard system, the PRVS4580 supports the physical separation and organisation of designated internal areas in compatible electrical distribution assemblies. Its rear vertical installation position makes it relevant to switchboard configurations where the specified internal layout requires segregation towards the rear of the enclosure, subject to the applicable ABB installation instructions.
The ABB PRVS4580 rear vertical segregation panel offers panel builders a manufacturer-specific accessory for the 450 mm × 800 mm configuration. Identified by ABB order code 1STQ002354B0000, it helps distinguish the required component from other System Pro E Power segregation variants. The precise meaning of the manufacturer's NO I.UP. notation should be verified against ABB technical documentation before installation.
Key Advantages
- Dedicated rear vertical segregation component for compatible ABB System Pro E Power switchboards.
- Supports the physical organisation and separation of designated internal switchboard areas.
- 450 mm specified height for the intended segregation configuration.
- 800 mm specified width for compatible modular switchboard arrangements.
- Rear positioning distinguishes the product from front and side segregation accessories.
- Vertical segregation orientation supports the manufacturer's designated internal layout.
- NO I.UP. configuration designation helps identify the correct product variant.
- ABB order code 1STQ002354B0000 provides accurate identification for procurement, assembly and replacement.
Key Features
- ABB System Pro E Power product family.
- PRVS4580 manufacturer model designation.
- ABB order code 1STQ002354B0000.
- Rear vertical segregation application.
- 450 mm specified installation height.
- 800 mm specified installation width.
- NO I.UP. manufacturer configuration notation.
- Mechanical accessory for compatible low-voltage switchboard internal arrangements.
- Intended for installation in accordance with ABB System Pro E Power technical documentation.
Rear Vertical Segregation for 800 mm Wide Switchboard Configurations
The ABB System Pro E Power range provides a modular platform for the construction of professional low-voltage switchboards and electrical power distribution assemblies. Within these systems, internal segregation accessories help define physical boundaries between selected functional areas. Correctly planned segregation contributes to an organised switchboard layout and supports the implementation of the intended equipment and cable arrangements.
The ABB PRVS4580 is identified specifically for rear vertical segregation. Its designation distinguishes it from horizontal partitions, side segregation components and accessories intended for other enclosure positions. Selecting a manufacturer-designated rear component is important because internal mounting positions, adjacent equipment and assembly arrangements can vary between different System Pro E Power configurations.
The manufacturer's specified dimensions of 450 mm height and 800 mm width are central to selecting the appropriate segregation arrangement. These figures should be assessed alongside the overall switchboard configuration, installed equipment, available internal space and adjoining segregation components. They should not automatically be interpreted as the exact external measurements of every supplied part or as proof of compatibility with all enclosures of a similar nominal width.
The NO I.UP. notation is part of the authoritative ABB product description and identifies an additional configuration characteristic. Because the supplied specification does not define this abbreviation in full, its meaning should not be assumed. Panel builders should consult the relevant ABB System Pro E Power catalogue, configuration guidance and assembly drawings to establish the precise installation requirements associated with this designation.
Rear vertical segregation may be used as part of a wider internal arrangement involving circuit-breaker compartments, conductor routing spaces and other designated switchboard sections. The suitability of the PRVS4580 depends on the complete installation, including its relationship with adjacent segregation panels, supports, electrical devices and enclosure structures. Any necessary mounting accessories or supplementary components should be confirmed from the manufacturer's documentation before assembly.
The ABB PRVS4580 is a mechanical segregation accessory and does not independently provide an ingress protection rating, electrical insulation classification, internal arc performance or a specified IEC/EN 61439 form of separation. These characteristics depend on the complete switchboard design and verified construction. Installation should follow ABB instructions, with the finished assembly assessed against applicable IEC/EN 61439 requirements and the electrical safety criteria of the project.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Compatible rear vertical segregation configurations within modular enclosures.
- Switchboard arrangements requiring a 450 mm high rear segregation component.
- Electrical distribution assemblies using the specified 800 mm width configuration.
- Internal compartment planning in industrial power distribution switchboards.
- Commercial building main and sub-distribution board projects.
- Professional electrical panel building using coordinated ABB segregation accessories.
- Maintenance, modification and replacement of compatible System Pro E Power rear segregation components.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PRVS4580 |
| ABB order code | 1STQ002354B0000 |
| Product type | Rear vertical segregation component |
| Accessory category | Low-voltage switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Specified height | 450 mm |
| Specified width | 800 mm |
| Manufacturer configuration designation | NO I.UP. |
| Associated enclosure system | ABB System Pro E Power |
| Application | Rear vertical segregation within compatible low-voltage switchboard assemblies |
| Fixing arrangement | Subject to ABB installation documentation |
| Form of internal separation | Not independently established by this component's specification |
| Compatibility | System Pro E Power configurations designated for the PRVS4580 |
| Original ABB description | SEGR.VERT.REAR H=450MM W=800MM NO I.UP. |
Frequently Asked Questions
What is the ABB PRVS4580 1STQ002354B0000 used for?
The ABB PRVS4580 is a rear vertical segregation component for compatible ABB System Pro E Power low-voltage switchboards. It is specified for a 450 mm height, 800 mm width and the manufacturer's NO I.UP. configuration designation.
What are the dimensions of the ABB PRVS4580 rear vertical segregation component?
The PRVS4580 has a manufacturer-specified height of 450 mm and width of 800 mm. These dimensions identify the intended segregation configuration. Compatibility with the complete enclosure and adjacent components should be confirmed using ABB technical documentation.
What does NO I.UP. mean in the ABB PRVS4580 specification?
NO I.UP. is a configuration designation included in ABB's description of the PRVS4580. The supplied specification does not define the abbreviation in full. Its precise meaning and associated installation requirements should therefore be confirmed against the relevant ABB System Pro E Power technical catalogue.
What is the difference between the ABB PRVS4580 and PRVS6560?
Both products are ABB System Pro E Power rear vertical segregation components carrying the NO I.UP. designation. The PRVS4580 is specified for a 450 mm height and 800 mm width, whereas the PRVS6560 is specified for a 650 mm height and 600 mm width. The correct variant should be selected according to the intended switchboard configuration and ABB documentation.
Does the ABB PRVS4580 provide a specific IEC/EN 61439 form of separation?
The PRVS4580 is an internal segregation accessory, but its individual specification does not establish a particular IEC/EN 61439 form of separation. The achieved separation arrangement depends on the complete switchboard design, associated segregation components and verification of the finished assembly.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PRVS4580 rear vertical segregation component, ABB order code 1STQ002354B0000, supports compatible internal switchboard arrangements with a specified 450 mm height, 800 mm width and NO I.UP. designation, helping panel builders select coordinated segregation hardware for industrial and commercial electrical distribution projects.
