Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002353B0000 ABB PRVS6560 System Pro E Power Rear Vertical Segregation H650 W600 NO I.UP.
ABB PRVS6560 (1STQ002353B0000) is a System Pro E Power rear vertical segregation component for compatible low-voltage switchboard assemblies, specified for a 650 mm height, 600 mm width and NO I.UP. configuration.
£240.13
Why Choose the ABB PRVS6560 System Pro E Power Rear Vertical Segregation Panel?
The ABB PRVS6560 (1STQ002353B0000) is a rear vertical segregation component for compatible ABB System Pro E Power low-voltage switchboard assemblies. The manufacturer's specification identifies the product as SEGR.VERT.REAR H=650MM W=600MM NO I.UP., establishing a rear vertical segregation arrangement with a specified 650 mm height, 600 mm width and NO I.UP. configuration designation.
Designed for integration into ABB's modular switchboard system, the PRVS6560 supports the physical organisation and separation of designated internal areas within compatible electrical distribution assemblies. Rear vertical segregation components are relevant where a switchboard layout requires a defined separation arrangement behind or towards the rear of installed equipment, subject to the manufacturer's specified mounting configuration.
The ABB PRVS6560 rear vertical segregation panel provides a manufacturer-specific solution for panel builders working with the 650 mm × 600 mm configuration. Identified by ABB order code 1STQ002353B0000, it can be selected as part of a coordinated System Pro E Power installation. The exact meaning of the NO I.UP. designation and its associated installation requirements should be confirmed using ABB technical documentation rather than inferred from the abbreviated description.
Key Advantages
- Purpose-designed rear vertical segregation component for compatible ABB System Pro E Power switchboards.
- Supports the physical separation of designated internal switchboard areas when incorporated into the appropriate assembly configuration.
- 650 mm specified height for the intended rear segregation arrangement.
- 600 mm specified width for compatible modular switchboard configurations.
- Rear installation designation helps distinguish the component from side, front and other segregation accessories.
- NO I.UP. manufacturer notation provides an additional reference for selecting the correct variant.
- Supports coordinated internal compartment planning using manufacturer-specific switchboard accessories.
- ABB order code 1STQ002353B0000 enables precise identification for procurement, installation and replacement.
Key Features
- ABB System Pro E Power product family.
- PRVS6560 product designation.
- ABB order code 1STQ002353B0000.
- Rear vertical segregation application.
- 650 mm specified height.
- 600 mm specified width.
- NO I.UP. configuration designation retained from the manufacturer's description.
- Mechanical accessory for compatible low-voltage switchboard internal arrangements.
- Intended for integration according to the applicable ABB System Pro E Power assembly documentation.
Rear Vertical Segregation for Organised Low-Voltage Switchboard Layouts
The ABB System Pro E Power range provides a modular platform for professional low-voltage switchboard construction. Within these assemblies, internal segregation components can help define the physical boundaries between selected equipment areas, cable spaces and other functional sections. Correct segregation planning is an important part of developing a switchboard layout that meets the intended installation and maintenance requirements.
The ABB PRVS6560 is identified specifically as a rear vertical segregation component. Its rear position and vertical orientation distinguish it from segregation accessories intended for other locations within the enclosure. When incorporated into a compatible System Pro E Power arrangement, the component contributes to the specified internal layout without requiring the panel builder to substitute a differently designated segregation part.
The manufacturer's dimensions of 650 mm in height and 600 mm in width provide essential information for selecting the correct segregation configuration. These measurements should be considered alongside the overall enclosure dimensions, internal equipment layout and the mounting requirements of adjacent components. They should not automatically be interpreted as the exact external measurements of every supplied element or as a guarantee of compatibility with any enclosure sharing the same nominal width.
The designation NO I.UP. is an important part of the PRVS6560 specification. Although it distinguishes this version from other rear vertical segregation arrangements, the supplied description does not define the abbreviation in full. Its precise meaning, the associated construction arrangement and any relevant installation exclusions should be checked against the current ABB System Pro E Power technical catalogue before selecting or fitting the component.
Rear segregation can be relevant to switchboards where the arrangement of electrical equipment, conductors and cable routing requires carefully planned internal boundaries. The suitability of the PRVS6560 depends on the complete switchboard configuration, including adjacent segregation components, enclosure supports, installed devices and any necessary access provisions. The manufacturer's assembly instructions should be followed to ensure that the intended arrangement is achieved.
The PRVS6560 is a mechanical segregation accessory and does not independently establish an electrical insulation rating, ingress protection classification, internal arc performance or a particular IEC/EN 61439 form of separation. These properties depend on the complete verified switchboard assembly and its construction. The finished installation must comply with the applicable ABB instructions, electrical safety requirements and relevant IEC/EN 61439 design and verification criteria.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Compatible rear vertical segregation arrangements within modular electrical enclosures.
- Switchboard configurations requiring a 650 mm high rear segregation component.
- Electrical distribution assemblies using the specified 600 mm width configuration.
- Internal compartment planning in industrial electrical distribution switchboards.
- Commercial building main and sub-distribution switchboard projects.
- Professional electrical panel building using coordinated ABB segregation accessories.
- Maintenance, modification and replacement of compatible System Pro E Power rear segregation components.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PRVS6560 |
| ABB order code | 1STQ002353B0000 |
| Product type | Rear vertical segregation component |
| Accessory category | Switchboard internal segregation accessories |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Specified height | 650 mm |
| Specified width | 600 mm |
| Manufacturer configuration designation | NO I.UP. |
| Associated enclosure system | ABB System Pro E Power |
| Application | Internal rear vertical segregation in compatible low-voltage switchboard assemblies |
| Form of internal separation | Not independently established by the supplied product description |
| Compatibility | System Pro E Power configurations designated for the PRVS6560 |
| Original ABB description | SEGR.VERT.REAR H=650MM W=600MM NO I.UP. |
Frequently Asked Questions
What is the ABB PRVS6560 1STQ002353B0000 used for?
The ABB PRVS6560 is a rear vertical segregation component for compatible ABB System Pro E Power low-voltage switchboards. It is specified for a 650 mm height, 600 mm width and the manufacturer's NO I.UP. configuration designation.
What are the dimensions of the ABB PRVS6560 rear vertical segregation component?
The PRVS6560 has a manufacturer-specified height of 650 mm and width of 600 mm. These dimensions identify the intended segregation configuration. Compatibility with the complete enclosure and adjacent components should be verified using ABB technical documentation.
What does NO I.UP. mean in the ABB PRVS6560 specification?
NO I.UP. is a configuration designation included in ABB's product description for the PRVS6560. The supplied specification does not define the abbreviation in full, so its precise meaning and the corresponding installation requirements should be confirmed against the relevant ABB System Pro E Power technical catalogue.
Does the ABB PRVS6560 provide a specific IEC/EN 61439 form of separation?
The PRVS6560 is an internal segregation accessory, but the supplied product description does not establish a particular IEC/EN 61439 form of separation. The achieved separation arrangement depends on the complete switchboard design, all associated segregation components and the verified assembly configuration.
Does the ABB PRVS6560 include mounting brackets or fixing hardware?
The supplied specification does not confirm whether mounting brackets, fasteners or other installation accessories are included with the PRVS6560. Exact product contents, fixing requirements and any separately required components should be checked against ABB documentation before ordering.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PRVS6560 rear vertical segregation component, ABB order code 1STQ002353B0000, supports compatible internal switchboard arrangements with a specified 650 mm height, 600 mm width and NO I.UP. designation, helping panel builders select coordinated segregation hardware for industrial and commercial electrical distribution projects.
