Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDNG2156 (1STQ002278B0000) is an IP65-compatible glazed switchboard door for ABB System pro E Power main distribution boards, designed for 2100 mm high and 500 mm wide enclosure configurations and supplied without an operating lever.
£992.36
The ABB PDNG2156 (1STQ002278B0000) is an IP65-compatible glazed enclosure door supplied without an operating lever, designed for the ABB System pro E Power range of low-voltage main distribution switchboards. Combining a glazed viewing area with a protective door assembly, it provides a practical solution for electrical panel builders requiring equipment visibility and controlled access to switchboard interiors.
Specified for a 2100 mm nominal enclosure height and 500 mm nominal width, the PDNG2156 is intended for compatible System pro E Power structures. Its glazed construction allows operators and maintenance personnel to visually inspect suitable equipment behind the door without routinely opening the enclosure, helping support efficient monitoring and maintenance procedures.
The door is designed for use in IP65 switchboard configurations, with the final protection rating dependent on the complete enclosure assembly, sealing arrangement and correct installation. Because the operating lever is not included, the appropriate ABB handle or lever accessory must be selected separately to suit the required locking and access arrangement.
The ABB PDNG2156 glazed door is intended for electrical distribution installations where equipment visibility and enclosure protection are both important. A glazed viewing section allows suitable indicators, circuit breaker positions and other visible equipment to be checked without routinely opening the switchboard. This can support operational inspections while reducing unnecessary access to the enclosure interior.
The PDNG2156 is specified for a 2100 mm high, 500 mm wide System pro E Power configuration. Its door assembly must be matched to the correct enclosure structure, hinges, closing components and sealing arrangement. As the product is supplied without an operating lever, a compatible ABB lever or handle must be selected separately to complete the intended door operation and locking arrangement.
IP65 denotes protection against dust ingress and water jets when achieved by the correctly assembled and verified enclosure. The door alone does not establish the protection rating of the entire switchboard. The final assembly must incorporate the required compatible doors, panels, seals and cable-entry components. System pro E Power switchboards are used in assemblies designed and verified in accordance with IEC 61439-1 and IEC 61439-2, subject to the complete switchboard design and installation.
| Product group | System pro E Power |
|---|---|
| Series | System pro E Power Main Distribution Switchboards |
| ABB order code | 1STQ002278B0000 |
| Product type | Glazed switchboard enclosure door |
| Component category | Main distribution board door and enclosure accessory |
| Nominal enclosure height | 2100 mm |
| Nominal enclosure width | 500 mm |
| Door configuration | Glazed |
| Protection class application | IP65 |
| Operating lever | Not included |
| Lever selection | Compatible ABB operating lever ordered separately |
| Mounting application | Compatible switchboard enclosure upright structure |
| Compatible system | ABB System pro E Power |
| Application | Protective glazed access door for low-voltage main distribution switchboards |
| Suitable equipment | Industrial and commercial low-voltage distribution assemblies |
The ABB PDNG2156 is an IP65-compatible glazed door for ABB System pro E Power low-voltage main distribution switchboards. It provides a protective enclosure access point with a glazed area for visual inspection of suitable equipment.
The PDNG2156 is specified for a nominal 2100 mm enclosure height and 500 mm enclosure width. These are the intended switchboard compatibility dimensions; installation clearances and the precise door assembly dimensions should be checked against ABB's technical drawings.
No. The ABB PDNG2156 is supplied without an operating lever. A compatible ABB handle or lever accessory must be selected separately according to the required door operation and locking arrangement.
The PDNG2156 is intended for IP65-compatible switchboard configurations. The completed enclosure must be correctly assembled with the appropriate sealing, closing and structural components to achieve the required dust and water ingress protection.
The PDNG2156 is identified for the ABB System pro E Power range. Compatibility with other enclosure systems should not be assumed. The door must be matched to the correct enclosure dimensions, mounting arrangement and ABB assembly instructions.
ABB System pro E Power enclosure accessories support professional low-voltage switchboard construction for industrial and commercial electrical distribution. The PDNG2156 IP65-compatible glazed door provides a dedicated solution for 2100 mm high, 500 mm wide enclosure configurations, combining equipment visibility with the flexibility to select a suitable ABB operating lever separately.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.