Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDRR0800 reinforced DIN rail installation kit for System pro E power low-voltage switchboards, designed for a 200 mm installation height and 800 mm enclosure width to support compatible DIN rail-mounted electrical equipment.
£103.27
The ABB PDRR0800 is a reinforced DIN rail installation kit designed for the ABB System pro E power modular low-voltage switchboard system. Specified for an 800 mm switchboard width and 200 mm installation height, this accessory supports the mounting of compatible DIN rail-mounted electrical components within professional distribution assemblies.
As part of ABB's System pro E power range, the PDRR0800 provides a dedicated mounting solution for electrical panel builders requiring a reinforced DIN rail arrangement. DIN rail systems are widely used to organise modular electrical equipment, including compatible circuit protection devices, control components and associated distribution accessories.
The reinforced design makes the PDRR0800 suitable for switchboard configurations requiring a dedicated structural mounting arrangement rather than a standard DIN rail installation. Its specified dimensions support integration into compatible System pro E power compartments, helping installers achieve an organised equipment layout. The product is identified by ABB order code 1STQ002140B0000.
DIN rail mounting systems are widely used in low-voltage electrical distribution assemblies because they provide a practical method of positioning compatible modular devices within a switchboard. Correctly selected mounting accessories help maintain an organised internal arrangement and support the installation requirements of the equipment being fitted.
The ABB PDRR0800 reinforced DIN rail kit is designed for the System pro E power platform, providing a dedicated mounting arrangement for an 800 mm wide switchboard configuration with a 200 mm installation height. This allows panel builders to select a mounting accessory matched to the intended compartment layout.
Its reinforced configuration distinguishes the PDRR0800 from a conventional DIN rail mounting arrangement. Reinforced mounting systems can be useful where the installation design calls for additional mechanical support, although the permitted equipment weight, loading capacity and supported device combinations must be established from the relevant ABB technical documentation.
The ABB System pro E power platform provides a modular approach to low-voltage switchboard construction, enabling compatible enclosure structures, mounting accessories and electrical distribution equipment to be assembled into project-specific configurations. Accessories such as the PDRR0800 support this approach by providing defined mounting arrangements for the selected equipment compartment.
The PDRR0800 is a mechanical installation accessory and does not provide electrical protection or switching functions. The suitability of the completed installation depends on the selected DIN rail-mounted devices, their mechanical and electrical requirements, the available clearances and the verified switchboard assembly design. Installation should follow the applicable ABB instructions and relevant requirements of the IEC/EN 61439 series.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ002140B0000 |
| Product designation | Kit Reinforced DIN Rail H=200 W=800 |
| Product type | Reinforced DIN rail installation kit |
| Accessory category | DIN rail mounting accessories |
| Mounting arrangement | Reinforced DIN rail |
| Specified installation height | 200 mm |
| Compatible switchboard width | 800 mm |
| Installation system | ABB System pro E power |
| Application | Mounting compatible DIN rail electrical components |
| Installation location | Compatible low-voltage switchboard compartments |
| Product classification | Mechanical switchboard mounting accessory |
| Manufacturer identification | ABB PDRR0800 |
The ABB PDRR0800 is a reinforced DIN rail installation kit designed for mounting compatible electrical components within ABB System pro E power low-voltage switchboard assemblies.
The PDRR0800 is specified for an 800 mm switchboard width and a 200 mm installation height. These values identify the intended switchboard mounting configuration rather than necessarily representing the external dimensions of every component supplied in the kit.
A reinforced DIN rail arrangement incorporates a mounting configuration intended to provide additional mechanical support compared with a conventional arrangement. The precise construction and permissible loading of the PDRR0800 must be determined from the applicable ABB installation documentation.
The PDRR0800 is intended for compatible DIN rail-mounted electrical equipment within System pro E power switchboards. Potential applications include modular protective devices and control components, provided their mounting requirements, dimensions and permissible loads are compatible with the ABB installation arrangement.
Compatibility should not be assumed for every DIN rail-mounted device. The selected equipment must match the rail arrangement, available mounting space, mechanical loading limits and applicable ABB System pro E power assembly requirements.
The PDRR0800 is identified as a reinforced DIN rail kit, not as a complete circuit protection assembly. Circuit breakers, control devices and other DIN rail-mounted electrical equipment should be selected separately unless explicitly included in the supplier's stated package contents.
The PDRR0800 belongs to the ABB System pro E power modular low-voltage switchboard range. It is designed for compatible configurations requiring a reinforced DIN rail arrangement with an 800 mm switchboard width and 200 mm installation height.
Yes, the PDRR0800 can be considered for compatible ABB System pro E power switchboard configurations used in industrial distribution applications. Suitability depends on the selected equipment, mounting requirements and completed assembly design.
The official ABB order code is 1STQ002140B0000. This reference identifies the PDRR0800 reinforced DIN rail kit for the specified 200 mm high and 800 mm wide System pro E power installation arrangement.
ABB System pro E power mounting accessories provide coordinated solutions for professional low-voltage switchboard construction. The PDRR0800 reinforced DIN rail kit supports organised installation of compatible modular electrical equipment within the specified 200 mm high and 800 mm wide switchboard arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.