Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHDX2432 (1STQ002129B0000) is a System Pro E Power horizontal installation kit for compatible XT2 plug-in 3-pole or 4-pole circuit-breaker configurations, specified for a 500 mm height, 800 mm width and N2 designation.
£290.77
The ABB PHDX2432 (1STQ002129B0000) is a dedicated XT2 plug-in horizontal installation kit for compatible ABB System Pro E Power low-voltage switchboard assemblies. The manufacturer's specification identifies the kit for XT2 plug-in circuit-breaker configurations with 3 or 4 poles, a 500 mm height, an 800 mm width and the N2 configuration designation.
Designed for integration into the modular ABB System Pro E Power enclosure system, the PHDX2432 supports the mechanical installation of compatible XT2 plug-in circuit-breaker arrangements. Its horizontal mounting orientation provides a manufacturer-specific solution for panel builders planning switchboard layouts that must accommodate the selected circuit breaker, its plug-in execution and the corresponding mounting configuration.
The 500 mm × 800 mm dimensional specification helps identify the intended installation arrangement, while the 3/4P, HOR and N2 designations distinguish this kit from other circuit-breaker mounting accessories. Identified by ABB order code 1STQ002129B0000, the PHDX2432 offers a dedicated System Pro E Power component for professional electrical panel building, low-voltage distribution switchboard construction and compatible equipment installation projects.
The ABB System Pro E Power range provides a modular platform for constructing professional low-voltage electrical switchboards and power distribution assemblies. Its selection of enclosure components, mounting systems and circuit-breaker installation accessories enables panel builders to configure equipment layouts according to the intended electrical distribution arrangement and the mechanical requirements of the completed assembly.
The ABB PHDX2432 is specifically identified for an XT2 plug-in circuit-breaker installation in a horizontal configuration. The manufacturer's 3/4P designation identifies the relevant three-pole and four-pole arrangements. These characteristics are important because circuit-breaker execution, pole configuration and mounting orientation must be considered together when selecting installation accessories for a low-voltage switchboard.
The kit is specified for a 500 mm height and an 800 mm width. These figures identify the intended System Pro E Power installation configuration and should not automatically be interpreted as the physical dimensions of every individual component supplied. Panel builders should confirm the required mounting space, enclosure arrangement and associated installation components using the applicable ABB technical documentation.
Plug-in circuit-breaker installations require appropriate mechanical interfaces and correctly selected associated equipment. The PHDX2432 is identified as an installation kit for the designated XT2 plug-in arrangement, but the supplied specification does not establish that an XT2 circuit breaker, plug-in base, electrical terminals or connection accessories are included. Exact kit contents and any separately required components should be verified against ABB product documentation before ordering.
The N2 designation forms part of the manufacturer's product identification and should be preserved when selecting the appropriate installation kit. Its precise configuration meaning should be confirmed against the relevant ABB System Pro E Power technical catalogue. This is particularly important when comparing mounting kits for different XT2 arrangements, as the correct accessory depends on the complete equipment configuration rather than the circuit-breaker family alone.
The PHDX2432 is a mechanical installation accessory and does not independently provide circuit protection, a rated current, short-circuit breaking capacity, ingress protection classification or a particular form of internal separation. These characteristics depend on the selected circuit breaker, associated equipment and complete switchboard assembly. Installation should follow ABB instructions, with the finished assembly assessed against applicable IEC/EN 61439 requirements and project-specific electrical design criteria.
| Product group | System Pro E Power |
|---|---|
| Product designation | PHDX2432 |
| ABB order code | 1STQ002129B0000 |
| Product type | XT2 plug-in horizontal installation kit |
| Accessory category | Circuit-breaker installation and mounting accessories |
| Associated circuit-breaker family | ABB XT2 |
| Associated circuit-breaker execution | Plug-in |
| Supported pole configurations | 3-pole / 4-pole, as designated by ABB |
| Installation orientation | Horizontal |
| Specified height | 500 mm |
| Specified width | 800 mm |
| Manufacturer configuration designation | N2 |
| Enclosure system | ABB System Pro E Power |
| Installation type | Mechanical integration into compatible switchboard assemblies |
| Application | Low-voltage switchboard XT2 plug-in circuit-breaker installation |
| Compatibility | System Pro E Power configurations specified for the PHDX2432 kit |
| Original ABB description | KIT XT2 PLUG-IN 3/4P HOR H=500 W=800 N2 |
The ABB PHDX2432 is an XT2 plug-in horizontal installation kit for compatible ABB System Pro E Power low-voltage switchboards. It is specified for designated 3-pole or 4-pole XT2 plug-in circuit-breaker arrangements with a 500 mm height, 800 mm width and N2 configuration designation.
The PHDX2432 is specified for a height of 500 mm and a width of 800 mm. These are the manufacturer's application dimensions for the intended installation arrangement and should not be assumed to describe the dimensions of every individual kit component.
The manufacturer's specification identifies the PHDX2432 as an XT2 plug-in 3/4P installation kit, indicating the designated three-pole and four-pole configurations. Compatibility with a particular XT2 device and its associated plug-in components should be confirmed using ABB technical documentation.
The PHDX2432 is identified as an installation kit, not as a complete circuit-breaker assembly. The supplied specification does not confirm that an XT2 circuit breaker, plug-in base or electrical connection accessories are included. Exact kit contents and separately required components should be verified against ABB product documentation before ordering.
HOR identifies the horizontal installation orientation. N2 is a manufacturer configuration designation associated with the PHDX2432 kit. Its precise meaning and the corresponding installation requirements should be confirmed against the relevant ABB System Pro E Power technical documentation.
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PHDX2432 XT2 plug-in installation kit, ABB order code 1STQ002129B0000, offers a dedicated horizontal mounting solution for compatible 3-pole and 4-pole XT2 configurations, with a specified 500 mm height, 800 mm width and N2 designation for industrial and commercial electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.