Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHDT6402 fixed intermediate horizontal installation kit for 3-pole and 4-pole Tmax T6 moulded case circuit breakers in System pro E power switchboards, designed for a 400 mm installation height and 800 mm enclosure width in the N1 configuration.
£302.43
The ABB PHDT6402 is a purpose-designed fixed horizontal installation kit for ABB Tmax T6 moulded case circuit breakers, developed for integration into the ABB System pro E power modular low-voltage switchboard system. Designed for compatible 3-pole and 4-pole T6 circuit breaker configurations, this accessory supports the installation of protective switching equipment within professional electrical distribution assemblies.
As part of ABB's System pro E power range, the PHDT6402 provides a dedicated mounting solution for integrating Tmax T6 circuit breakers into compatible switchboard compartments. Its fixed horizontal intermediate arrangement supports structured panel construction, allowing switchboard manufacturers and electrical installers to position circuit breakers within the specified assembly layout while coordinating with the surrounding enclosure components.
The PHDT6402 is specified for a 400 mm installation height and 800 mm switchboard width, supporting 3-pole and 4-pole ABB Tmax T6 circuit breakers in a fixed intermediate horizontal configuration. Identified by the N1 configuration designation, the kit is intended for the corresponding System pro E power installation arrangement. Its official ABB order code is 1STQ002121B0000.
Correct installation of moulded case circuit breakers is an important part of constructing reliable and maintainable low-voltage electrical distribution assemblies. Mounting arrangements must accommodate the selected protective device, the available switchboard compartment space, electrical connections and the mechanical requirements of the completed installation.
The ABB PHDT6402 fixed intermediate horizontal installation kit is designed for incorporating compatible ABB Tmax T6 3-pole and 4-pole circuit breakers into System pro E power switchboards. Its specified 400 mm installation height and 800 mm enclosure width compatibility allow panel builders to select the appropriate mounting accessory for the intended switchboard configuration.
ABB Tmax T6 circuit breakers belong to the Tmax family of low-voltage moulded case circuit breakers used in electrical distribution and circuit protection applications. The T6 frame is associated with higher-current distribution duties within the Tmax range, with the precise rated current, breaking capacity and protection functions determined by the selected circuit breaker version and trip unit.
The ABB System pro E power platform provides a modular enclosure architecture for integrating protective devices, busbar systems and associated distribution equipment. Dedicated installation accessories such as the PHDT6402 help coordinate circuit breaker positioning with the surrounding switchboard structure and the specified equipment compartment arrangement.
The PHDT6402 is a mechanical installation accessory rather than an electrical protective device. Overload protection, short-circuit protection and switching performance are provided by the separately selected Tmax T6 circuit breaker. The completed assembly must satisfy the applicable ABB installation requirements, electrical clearances, thermal considerations and relevant low-voltage switchgear assembly standards.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ002121B0000 |
| Product type | Circuit breaker installation kit |
| Accessory category | MCCB mounting and installation accessories |
| Compatible circuit breaker series | ABB Tmax T6 |
| Compatible device type | Moulded case circuit breaker (MCCB) |
| Compatible pole configurations | 3-pole / 4-pole |
| Circuit breaker installation type | Fixed |
| Mounting orientation | Horizontal |
| Installation arrangement | Intermediate horizontal |
| Specified installation height | 400 mm |
| Compatible switchboard width | 800 mm |
| Installation configuration | N1 |
| Application | Low-voltage switchboard circuit breaker installation |
| Installation location | Inside compatible System pro E power enclosures |
| System compatibility | ABB System pro E power |
| Component function | Fixed intermediate horizontal MCCB installation |
| Product classification | Mechanical switchboard installation accessory |
The ABB PHDT6402 is a fixed intermediate horizontal installation kit designed for mounting compatible ABB Tmax T6 moulded case circuit breakers within ABB System pro E power low-voltage switchboard assemblies.
The PHDT6402 is designed for ABB Tmax T6 circuit breakers in 3-pole and 4-pole fixed configurations. The selected circuit breaker must be compatible with the specified System pro E power installation arrangement.
The PHDT6402 is specified for a 400 mm installation height and an 800 mm switchboard width. These values describe the intended mounting configuration rather than the external dimensions of the individual kit components.
The PHDT6402 is specifically designed for fixed intermediate horizontal installation of compatible ABB Tmax T6 circuit breakers. Other mounting orientations or installation arrangements may require different System pro E power accessories.
The intermediate horizontal designation identifies the mounting arrangement specified for this T6 installation kit. It distinguishes the PHDT6402 from other circuit breaker installation accessories designed for different positions, orientations or switchboard configurations.
N1 is the configuration designation associated with this ABB installation kit. It should be matched with the relevant System pro E power assembly layout and ABB installation documentation to ensure that the correct mounting arrangement is selected.
The PHDT6402 is identified as a circuit breaker installation kit, not a complete moulded case circuit breaker. The compatible Tmax T6 protective device should be selected separately unless a supplier explicitly confirms that it is included in the supplied package.
The PHDT6402 belongs to the ABB System pro E power modular low-voltage switchboard range. It is intended for compatible enclosure configurations requiring fixed intermediate horizontal installation of a 3-pole or 4-pole Tmax T6 circuit breaker.
The official ABB order code is 1STQ002121B0000. This reference identifies the PHDT6402 Tmax T6 fixed intermediate horizontal installation kit for the specified 400 mm high, 800 mm wide N1 configuration.
ABB System pro E power installation accessories support the integration of protective switching devices into modular low-voltage distribution assemblies. The PHDT6402 provides a dedicated fixed intermediate horizontal mounting solution for compatible ABB Tmax T6 3-pole and 4-pole circuit breakers, supporting organised switchboard construction within the specified 400 mm high, 800 mm wide N1 installation arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.