Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHDX4422 (1STQ002112B0000) is a System pro E Power internal horizontal installation kit for compatible Tmax XT4 plug-in 3-pole and 4-pole circuit breakers, designed for 500 mm high and 800 mm wide switchboard compartments in the N2 configuration.
£240.20
The ABB PHDX4422 (1STQ002112B0000) is a dedicated installation kit for ABB Tmax XT4 plug-in circuit breakers, designed for integration into ABB System pro E Power low-voltage distribution switchboards. This modular mounting accessory supports the installation of compatible 3-pole and 4-pole XT4 circuit breakers in an internal horizontal arrangement, providing a purpose-designed solution for professional electrical panel construction.
As part of the ABB System pro E Power modular switchboard series, the PHDX4422 is configured for a nominal 500 mm compartment height and 800 mm compartment width. Its dedicated XT4 plug-in mounting arrangement helps panel builders incorporate compatible moulded-case circuit breakers into the switchboard structure while maintaining an organised equipment layout and consistent modular installation.
Designed for the specified N2 configuration, the ABB PHDX4422 provides a practical solution for switchboard manufacturers, industrial electrical contractors and OEM panel builders working with ABB Tmax XT4 plug-in circuit breakers. By using a dedicated ABB installation kit, engineers can select mounting components matched to the intended breaker family, pole configuration and enclosure geometry.
Moulded-case circuit breakers are widely used in low-voltage electrical distribution systems to provide circuit protection and switching functions. Correct mechanical installation is essential for integrating these devices into a switchboard assembly. The ABB PHDX4422 XT4 plug-in installation kit is designed to support the mounting of compatible Tmax XT4 circuit breakers in a defined internal horizontal arrangement within the System pro E Power enclosure platform.
The PHDX4422 is specified for 3-pole and 4-pole plug-in XT4 configurations with a nominal installation space of 500 mm high and 800 mm wide. The plug-in execution allows a compatible breaker to interface with its designated plug-in connection arrangement. The mounting kit must be selected alongside the correct circuit breaker execution, fixed plug-in components, electrical connections and other accessories required by the complete assembly.
ABB System pro E Power is a modular low-voltage switchboard platform used in assemblies designed and verified in accordance with IEC 61439-1 and IEC 61439-2. The PHDX4422 is a mechanical installation accessory rather than a circuit breaker or standalone electrical protection device. The final assembly's electrical ratings, short-circuit performance, internal segregation and ingress protection depend on the complete switchboard design, compatible equipment selection and correct installation in accordance with ABB's technical instructions.
| Product group | System pro E Power |
|---|---|
| Series | System pro E Power Main Distribution Switchboards |
| ABB order code | 1STQ002112B0000 |
| Product type | Circuit breaker installation kit |
| Component category | Moulded-case circuit breaker mounting accessory |
| Compatible circuit breaker family | ABB Tmax XT4 |
| Circuit breaker execution | Plug-in |
| Supported pole configurations | 3-pole / 4-pole |
| Installation orientation | Internal horizontal |
| Nominal compartment height | 500 mm |
| Nominal compartment width | 800 mm |
| Configuration designation | N2 |
| Mounting application | Internal circuit breaker installation |
| Compatible switchboard system | ABB System pro E Power |
| Suitable equipment | Low-voltage main distribution switchboards |
| Application | Mounting compatible Tmax XT4 plug-in circuit breakers within modular electrical distribution assemblies |
The ABB PHDX4422 is an installation kit for compatible ABB Tmax XT4 plug-in moulded-case circuit breakers. It is designed for internal horizontal mounting within ABB System pro E Power low-voltage switchboards.
The PHDX4422 is specified for ABB Tmax XT4 plug-in circuit breakers in 3-pole and 4-pole configurations. Compatibility with a particular breaker execution and its plug-in connection components should be checked against the relevant ABB mounting instructions.
The PHDX4422 is designed for a nominal 500 mm compartment height and 800 mm compartment width. These values describe the intended switchboard mounting configuration rather than the overall physical dimensions of every component supplied in the kit.
The internal horizontal designation identifies the intended circuit breaker mounting orientation within the switchboard. N2 is the configuration designation specified for this installation kit; its exact application should be verified against ABB's System pro E Power assembly documentation.
The PHDX4422 is identified as a circuit breaker installation kit, not a complete moulded-case circuit breaker. The required XT4 breaker, compatible plug-in connection components and associated electrical accessories should be specified separately unless explicitly included in the supplier's package description.
ABB System pro E Power accessories support consistent modular switchboard construction for industrial and commercial electrical distribution. The PHDX4422 installation kit provides a dedicated mounting solution for compatible ABB Tmax XT4 plug-in circuit breakers, helping electrical panel builders achieve organised internal horizontal installations in 500 mm high and 800 mm wide switchboard compartments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.