Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHDX4409 (1STQ002111B0000) is a System Pro E Power installation kit for compatible motorised horizontal XT4 plug-in 3-pole or 4-pole circuit-breaker arrangements, specified for a 200 mm height, 800 mm width and N1 configuration.
£226.57
The ABB PHDX4409 (1STQ002111B0000) is a dedicated XT4 plug-in motorised horizontal installation kit for compatible ABB System Pro E Power low-voltage switchboard assemblies. The manufacturer's specification identifies the kit for XT4 plug-in circuit-breaker configurations with 3 or 4 poles, a 200 mm height, an 800 mm width and the N1 configuration designation.
Designed for integration into ABB's modular switchboard enclosure system, the PHDX4409 supports the mechanical installation of compatible XT4 plug-in circuit-breaker arrangements associated with motorised operation. Its horizontal mounting configuration provides a manufacturer-specific solution for panel builders planning equipment layouts that must accommodate the selected circuit breaker, its plug-in execution and the relevant motor-operating arrangement.
The 200 mm × 800 mm dimensional specification helps identify the intended installation configuration, while the 3/4P and MOT.H. designations distinguish this kit from other XT4 installation accessories. Identified by ABB order code 1STQ002111B0000, the PHDX4409 offers a dedicated System Pro E Power component for professional low-voltage switchboard construction and compatible equipment installation projects.
The ABB System Pro E Power range provides a modular platform for constructing professional low-voltage electrical switchboards and power distribution assemblies. Its selection of mounting kits, enclosure components and installation accessories enables panel builders to configure equipment arrangements according to the selected circuit-breaker family, mounting orientation and operational requirements of the completed assembly.
The ABB PHDX4409 is specifically identified for an XT4 plug-in circuit-breaker arrangement with a motorised horizontal application. The manufacturer's 3/4P designation identifies the relevant three-pole and four-pole configurations. These characteristics are important when selecting a mounting kit because the mechanical installation requirements can differ between circuit-breaker executions, operating arrangements and enclosure layouts.
The kit is specified for a 200 mm height and an 800 mm width. These figures identify the intended System Pro E Power installation configuration and should not automatically be interpreted as the physical dimensions of every component supplied. Panel builders should verify the required installation space, associated mounting arrangement and compatibility with the selected XT4 device using the applicable ABB technical documentation.
Motorised circuit-breaker applications may involve additional operating equipment and electrical connections compared with manually operated arrangements. The MOT.H. designation identifies the PHDX4409 for the corresponding motorised horizontal configuration, but the supplied product specification does not confirm that a motor operator, circuit breaker, plug-in base or electrical connection accessories are included. Exact kit contents and separately required equipment should be checked before ordering.
The N1 designation forms part of the manufacturer's product identification and should be preserved when selecting the appropriate installation kit. Its precise configuration meaning should be confirmed against ABB System Pro E Power documentation. This is especially important when comparing installation kits for similar XT4 devices, as the correct accessory depends on the complete equipment configuration rather than the circuit-breaker family alone.
The PHDX4409 is a mechanical installation accessory and does not independently provide motorised switching functionality, circuit protection, a current rating, short-circuit breaking capacity or an enclosure ingress protection classification. These characteristics depend on the selected circuit breaker, associated operating equipment and complete switchboard assembly. Installation should follow ABB instructions, with the finished assembly assessed against applicable IEC/EN 61439 requirements and project-specific electrical design criteria.
| Product group | System Pro E Power |
|---|---|
| Product designation | PHDX4409 |
| ABB order code | 1STQ002111B0000 |
| Product type | XT4 plug-in motorised horizontal installation kit |
| Accessory category | Circuit-breaker installation and mounting accessories |
| Associated circuit-breaker family | ABB XT4 |
| Associated circuit-breaker execution | Plug-in |
| Supported pole configurations | 3-pole / 4-pole, as designated by ABB |
| Operating arrangement | Motorised application |
| Installation orientation | Horizontal |
| Specified height | 200 mm |
| Specified width | 800 mm |
| Manufacturer configuration designation | N1 |
| Enclosure system | ABB System Pro E Power |
| Installation type | Mechanical integration into compatible switchboard assemblies |
| Application | Low-voltage switchboard installation of compatible motorised XT4 plug-in circuit-breaker arrangements |
| Compatibility | System Pro E Power configurations specified for the PHDX4409 kit |
| Original ABB description | KIT XT4 PLUG-IN 3/4P MOT.H. H200 W800 N1 |
The ABB PHDX4409 is an XT4 plug-in installation kit for compatible ABB System Pro E Power low-voltage switchboards. It is specified for designated 3-pole or 4-pole motorised horizontal XT4 arrangements.
The PHDX4409 is specified for a height of 200 mm and a width of 800 mm. These are the manufacturer's application dimensions for the intended installation arrangement and should not be assumed to describe the dimensions of every individual kit component.
The manufacturer's specification identifies the PHDX4409 as an XT4 plug-in 3/4P installation kit for the designated motorised horizontal arrangement. Compatibility with a particular three-pole or four-pole XT4 device, its motor operator and associated plug-in components should be confirmed using ABB technical documentation.
The PHDX4409 is specified for an XT4 plug-in 3/4-pole motorised horizontal configuration, while the PHDX4407 is specified for an XT4 plug-in 3/4-pole horizontal configuration without the MOT.H. designation. Both specify a 200 mm height, 800 mm width and N1 designation. The correct kit should be selected according to the intended circuit-breaker operating arrangement and ABB compatibility documentation.
The PHDX4409 is identified as an installation kit, not as a complete motorised circuit-breaker assembly. The supplied specification does not confirm that an XT4 circuit breaker, motor operator, plug-in base or electrical connection accessories are included. Exact kit contents and separately required components should be verified against ABB product documentation before ordering.
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PHDX4409 XT4 plug-in installation kit, ABB order code 1STQ002111B0000, offers a dedicated solution for compatible motorised horizontal 3-pole and 4-pole XT4 arrangements, with a specified 200 mm height, 800 mm width and N1 designation for industrial and commercial electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.