Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002102B0000 ABB PHDX3402 System Pro E Power XT3 Fixed 3/4 Pole Interlocked Installation Kit H500 W800
ABB PHDX3402 (1STQ002102B0000) System Pro E Power internal installation kit for two fixed 3-pole or 4-pole Tmax XT3 circuit breakers in a horizontal, mechanically interlocked arrangement, designed for 500 mm high compartments in 800 mm wide low-voltage switchboards.
£226.57
Why Choose the ABB PHDX3402 System Pro E Power Installation Kit?
The ABB PHDX3402, manufacturer order code 1STQ002102B0000, is a purpose-designed internal circuit breaker installation kit for ABB System Pro E Power low-voltage switchboards. Specifically engineered for ABB Tmax XT3 fixed 3-pole or 4-pole moulded case circuit breakers (MCCBs), this kit provides a coordinated horizontal mounting arrangement for two mechanically interlocked circuit breakers within industrial and commercial electrical distribution assemblies.
As part of the ABB System Pro E Power modular switchboard range, the PHDX3402 enables electrical panel builders, switchboard manufacturers and industrial contractors to integrate compatible Tmax XT3 circuit breakers into professionally configured distribution systems. Its dedicated mounting components simplify mechanical assembly, support consistent equipment positioning and facilitate the construction of reliable low-voltage switchboards.
Designed for a 500 mm compartment height and an 800 mm switchboard width, the PHDX3402 accommodates two fixed Tmax XT3 circuit breakers in a horizontal, mechanically interlocked arrangement. The kit is intended for interlocked breaker installations without a motor-operated configuration and provides a practical mounting solution for coordinated electrical switching and distribution applications.
Key Advantages
- Purpose-designed installation kit for ABB Tmax XT3 fixed circuit breakers.
- Compatible with 3-pole and 4-pole MCCB configurations.
- Supports two mechanically interlocked circuit breakers within one compartment.
- Horizontal installation arrangement for System Pro E Power switchboards.
- Designed for a 500 mm high compartment.
- Suitable for 800 mm wide switchboard structures.
- Dedicated mounting components support accurate positioning and straightforward assembly.
- Integrates with the modular ABB System Pro E Power distribution platform.
- Suitable for electrical distribution systems requiring coordinated circuit breaker switching.
- Supports professional panel building, switchboard manufacturing and electrical infrastructure projects.
Key Features
- ABB System Pro E Power internal installation kit.
- Manufacturer type designation: PHDX3402.
- ABB order code: 1STQ002102B0000.
- Designed for ABB Tmax XT3 fixed moulded case circuit breakers.
- Compatible with 3-pole and 4-pole breaker versions.
- Mechanically interlocked circuit breaker arrangement.
- Horizontal mounting orientation.
- 500 mm nominal compartment height.
- 800 mm nominal switchboard width.
- Supports two circuit breakers per compartment.
- Dedicated fixing brackets and mounting plate for compatible breaker installations.
- Associated internal panels with quarter-turn fixing screws.
- Panel arrangement can be hinged on the right or left using the compatible ABB PHFP0020 hinge kit.
- Designed for integration with compatible System Pro E Power structural and panel-support components.
- Supplied as one installation kit.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Series: System Pro E Power Internal Kits
- Model / type: PHDX3402
- Manufacturer order code: 1STQ002102B0000
- EAN / GTIN: 8015646818492
- Product type: Internal circuit breaker installation kit
- Compatible circuit breaker series: ABB Tmax XT3
- Circuit breaker mounting version: Fixed
- Compatible pole configurations: 3-pole / 4-pole
- Installation orientation: Horizontal
- Operating arrangement: Mechanically interlocked
- Nominal compartment height: 500 mm
- Nominal switchboard width: 800 mm
- Number of circuit breakers per compartment: 2
- Reported product dimensions (H × W × D): 498 × 798 × 250 mm
- Reported net weight: 9.87 kg
- Mounting components: Dedicated fixing brackets, mounting plate and associated panels
- Panel fixing arrangement: Quarter-turn screws
- Optional panel hinge accessory: ABB PHFP0020
- Installation system: ABB System Pro E Power modular switchboards
- Packaging configuration: 1 kit per package
- Application: Low-voltage electrical distribution and switchboard assembly
Reliable Circuit Breaker Installation for Low-Voltage Switchboards
The ABB PHDX3402 installation kit provides a dedicated mechanical mounting solution for two fixed Tmax XT3 circuit breakers installed in a horizontal, mechanically interlocked arrangement. This configuration is suitable for electrical distribution applications where coordinated switching between two circuit breakers is required, helping panel builders create organised and serviceable switchboard assemblies.
The kit is specifically designed for 500 mm high compartments within 800 mm wide System Pro E Power switchboards. Its dedicated fixing brackets, mounting plate and associated panels support integration into the ABB modular switchboard system. Quarter-turn panel fasteners facilitate panel installation, while a compatible PHFP0020 accessory allows the panel to be hinged from either side when required.
The PHDX3402 is a mechanical installation kit rather than a complete circuit breaker or interlocking assembly. The circuit breakers and the required mechanical interlocking plate are not included as part of the installation kit and must be selected separately. The kit itself does not determine the electrical current rating, short-circuit breaking capacity or protective characteristics of the installed Tmax XT3 circuit breakers.
Depending on the switchboard configuration, additional System Pro E Power components may be required. These can include PUKI1800 or PUKI2000 intermediate depth uprights and compatible PFPF fixed or PFPS swing panel-support frames. Intermediate depth uprights may not be required for fixed Tmax XT3 installations in non-segregated structures. For non-accessorised 3-pole Tmax XT3 breakers mounted on a 3/4-pole kit, dedicated AD3307 cover flanges may also be necessary, with one flange required for each breaker in the interlocked arrangement.
Typical Applications
- ABB System Pro E Power low-voltage distribution switchboards.
- Industrial electrical distribution panels and assemblies.
- Mechanically interlocked Tmax XT3 circuit breaker installations.
- Coordinated switching arrangements using two fixed circuit breakers.
- Main and secondary electrical distribution boards.
- Commercial building electrical infrastructure.
- Industrial manufacturing and production facilities.
- Electrical power distribution and switching assemblies.
- OEM switchboard manufacturing and electrical panel building.
- Electrical infrastructure upgrades and switchboard refurbishment projects.
Frequently Asked Questions
What is the ABB PHDX3402 used for?
The ABB PHDX3402 is an internal installation kit designed for mounting two fixed Tmax XT3 circuit breakers in a horizontal, mechanically interlocked arrangement within ABB System Pro E Power low-voltage switchboards.
Which circuit breakers are compatible with the ABB PHDX3402?
The PHDX3402 is designed for ABB Tmax XT3 fixed moulded case circuit breakers in compatible 3-pole or 4-pole configurations. The selected breakers must be suitable for the intended mechanically interlocked installation.
What switchboard dimensions does the PHDX3402 support?
The ABB PHDX3402 is designed for a 500 mm high compartment within an 800 mm wide System Pro E Power switchboard. These are the nominal installation dimensions rather than the overall dimensions of the complete switchboard.
How many circuit breakers can be installed using this kit?
The PHDX3402 supports two compatible fixed Tmax XT3 circuit breakers within one 500 mm high compartment, arranged horizontally for mechanically interlocked operation.
Does the ABB PHDX3402 support mechanically interlocked circuit breakers?
Yes. The PHDX3402 is specifically designed for mechanically interlocked Tmax XT3 circuit breaker arrangements. The required mechanical interlocking plate is not included with the installation kit and must be specified separately.
Is the PHDX3402 designed for motor-operated circuit breakers?
No. The PHDX3402 is the fixed, mechanically interlocked installation kit without the motor-operated designation. It should be selected for the corresponding non-motor-operated breaker arrangement.
Does the PHDX3402 include the circuit breakers?
No. The PHDX3402 is a mechanical installation kit comprising dedicated mounting components for the specified System Pro E Power arrangement. The Tmax XT3 circuit breakers, mechanical interlocking plate and any additional required accessories must be ordered separately.
Are additional mounting accessories required?
Additional accessories depend on the switchboard configuration. These may include PUKI1800 or PUKI2000 intermediate depth uprights, PFPF or PFPS panel-support frames and AD3307 cover flanges for applicable 3-pole Tmax XT3 installations. The optional PHFP0020 kit can be used where a hinged panel arrangement is required.
What is the ABB manufacturer order code for PHDX3402?
The official ABB manufacturer order code is 1STQ002102B0000, corresponding to the PHDX3402 internal installation kit within the ABB System Pro E Power product group.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power installation components provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB PHDX3402 supports the integration of two fixed Tmax XT3 circuit breakers in a horizontal, mechanically interlocked configuration, helping electrical panel builders deliver organised, dependable and professionally assembled power distribution systems.
