Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002098B0000 ABB PHDX1301 XT1 Fixed Horizontal Installation Kit 3/4 Pole 150 mm Height 800 mm Width
ABB PHDX1301 fixed horizontal installation kit for 3-pole and 4-pole Tmax XT1 moulded case circuit breakers in System pro E power switchboards, designed for a 150 mm installation height and 800 mm enclosure width in the N1 configuration.
£157.07
Why Choose the ABB PHDX1301 XT1 Fixed Horizontal Installation Kit?
The ABB PHDX1301 is a purpose-designed fixed horizontal installation kit for ABB Tmax XT1 moulded case circuit breakers, developed for integration into the ABB System pro E power modular low-voltage switchboard system. Designed for compatible 3-pole and 4-pole XT1 circuit breaker configurations, this accessory supports the secure and organised installation of protective switching devices within electrical distribution assemblies.
As part of ABB's System pro E power range, the PHDX1301 provides a dedicated mounting solution for incorporating Tmax XT1 circuit breakers into compatible switchboard compartments. Its fixed horizontal arrangement supports structured panel construction, helping switchboard manufacturers and electrical installers position circuit breakers according to the intended assembly layout while maintaining compatibility with the corresponding enclosure architecture.
The PHDX1301 is specified for a 150 mm installation height and 800 mm switchboard width, supporting 3-pole and 4-pole ABB Tmax XT1 circuit breakers in a fixed horizontal mounting arrangement. Identified by the N1 configuration designation, the kit is intended for the corresponding System pro E power installation layout. Its official ABB order code is 1STQ002098B0000.
Key Advantages
- Purpose-designed installation kit for ABB Tmax XT1 moulded case circuit breakers.
- Compatible with the ABB System pro E power modular switchboard system.
- Supports 3-pole and 4-pole XT1 circuit breaker configurations.
- Designed for fixed horizontal circuit breaker installation.
- 150 mm installation height for the specified switchboard compartment arrangement.
- Suitable for compatible electrical enclosures with an 800 mm width.
- Dedicated N1 configuration for the corresponding installation layout.
- Supports efficient use of available switchboard mounting space.
- Helps simplify circuit breaker integration during professional panel construction.
- Provides a coordinated installation solution within the ABB modular enclosure system.
- Genuine ABB accessory identified by manufacturer order code 1STQ002098B0000.
Key Features
- ABB System pro E power switchboard installation accessory.
- PHDX1301 manufacturer product designation.
- Designed for ABB Tmax XT1 moulded case circuit breakers.
- Fixed circuit breaker installation.
- Horizontal mounting orientation.
- Compatible with 3-pole and 4-pole XT1 configurations.
- 150 mm specified installation height.
- 800 mm compatible switchboard width.
- N1 installation configuration.
- Supports organised integration of circuit protection equipment into low-voltage distribution assemblies.
- Designed for use with corresponding System pro E power structural and mounting components.
- Suitable for new switchboard construction and compatible installation modifications.
- Manufacturer reference 1STQ002098B0000 for accurate identification and procurement.
Reliable Circuit Breaker Integration for Low-Voltage Switchboards
Correct installation of moulded case circuit breakers is essential for constructing reliable, accessible and maintainable low-voltage electrical distribution assemblies. Circuit breaker mounting arrangements must accommodate the selected protective device, available switchboard space, electrical connections and the mechanical requirements of the completed installation.
The ABB PHDX1301 fixed horizontal installation kit is designed for incorporating compatible ABB Tmax XT1 3-pole and 4-pole circuit breakers into System pro E power switchboards. Its specified 150 mm installation height and 800 mm enclosure width compatibility allow panel builders to select the appropriate mounting accessory for the intended compartment arrangement.
ABB Tmax XT1 circuit breakers belong to the Tmax XT family of low-voltage moulded case circuit breakers, used for electrical distribution and circuit protection applications. The System pro E power platform provides a modular enclosure architecture for integrating these protective devices alongside distribution components, busbar systems and associated electrical equipment.
The PHDX1301 provides a mechanical installation solution rather than an electrical protection function. Overload protection, short-circuit protection and switching performance depend on the separately selected XT1 circuit breaker and its trip unit. The completed assembly must also satisfy the applicable installation requirements, electrical clearances, thermal considerations and relevant low-voltage switchgear assembly standards.
Typical Applications
- ABB System pro E power low-voltage switchboard assemblies.
- Fixed horizontal installation of ABB Tmax XT1 moulded case circuit breakers.
- Electrical distribution panels incorporating 3-pole or 4-pole XT1 devices.
- Switchboard compartments with a specified 150 mm installation height.
- Modular electrical enclosures with an 800 mm width.
- Commercial and industrial low-voltage power distribution systems.
- Main and secondary electrical distribution switchboards.
- Industrial control and power distribution panels requiring MCCB protection.
- Professional switchboard manufacturing and electrical panel-building projects.
- Electrical infrastructure upgrades involving compatible ABB System pro E power assemblies.
- Replacement of matching XT1 fixed horizontal installation accessories.
Technical Specifications
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ002098B0000 |
| Product type | Circuit breaker installation kit |
| Accessory category | MCCB mounting and installation accessories |
| Compatible circuit breaker series | ABB Tmax XT1 |
| Compatible device type | Moulded case circuit breaker (MCCB) |
| Compatible pole configurations | 3-pole / 4-pole |
| Circuit breaker installation type | Fixed |
| Mounting orientation | Horizontal |
| Specified installation height | 150 mm |
| Compatible switchboard width | 800 mm |
| Installation configuration | N1 |
| Application | Low-voltage switchboard circuit breaker installation |
| Installation location | Inside compatible System pro E power enclosures |
| System compatibility | ABB System pro E power |
| Component function | Fixed horizontal MCCB installation |
| Product classification | Mechanical switchboard installation accessory |
Frequently Asked Questions
What is the ABB PHDX1301 used for?
The ABB PHDX1301 is a fixed horizontal installation kit designed for mounting compatible ABB Tmax XT1 moulded case circuit breakers within ABB System pro E power low-voltage switchboard assemblies.
Which circuit breakers are compatible with the PHDX1301?
The PHDX1301 is designed for ABB Tmax XT1 circuit breakers in 3-pole and 4-pole fixed configurations. The selected circuit breaker must be compatible with the specified System pro E power mounting arrangement.
What are the installation dimensions of the ABB PHDX1301?
The PHDX1301 is specified for a 150 mm installation height and an 800 mm switchboard width. These values describe the intended installation arrangement rather than the external dimensions of the individual kit components.
Does the PHDX1301 support horizontal or vertical circuit breaker mounting?
The PHDX1301 is specifically designed for fixed horizontal installation of compatible ABB Tmax XT1 circuit breakers. Other mounting orientations may require different System pro E power installation accessories.
What is the difference between the ABB PHDX1301 and PHDX1401?
Both products are fixed horizontal installation kits for 3-pole and 4-pole ABB Tmax XT1 circuit breakers in 800 mm wide System pro E power configurations with the N1 designation. The PHDX1301 is specified for a 150 mm installation height, whereas the PHDX1401 is specified for a 200 mm installation height.
What does the N1 designation mean on the PHDX1301?
N1 identifies the configuration associated with this ABB installation kit. It should be matched with the relevant System pro E power assembly layout and ABB installation documentation to ensure the correct mounting arrangement is selected.
Does the ABB PHDX1301 include a Tmax XT1 circuit breaker?
The PHDX1301 is identified as a circuit breaker installation kit, not a complete moulded case circuit breaker. The compatible XT1 protective device should be selected separately unless a supplier explicitly states that it is included.
Which ABB enclosure system is compatible with the PHDX1301?
The PHDX1301 belongs to the ABB System pro E power modular low-voltage switchboard range. It is intended for compatible enclosure configurations requiring fixed horizontal installation of a 3-pole or 4-pole Tmax XT1 circuit breaker.
What is the ABB order code for the PHDX1301?
The official ABB order code is 1STQ002098B0000. This reference identifies the PHDX1301 fixed horizontal XT1 installation kit for the specified 150 mm high, 800 mm wide N1 configuration.
Designed for Professional Switchboard Construction
ABB System pro E power installation accessories support the integration of protective switching devices into modular low-voltage distribution assemblies. The PHDX1301 provides a dedicated fixed horizontal mounting solution for compatible ABB Tmax XT1 3-pole and 4-pole circuit breakers, supporting organised switchboard construction within the specified 150 mm high, 800 mm wide N1 installation arrangement.
