Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO1491 System pro E Power open top/bottom cover, manufactured from pickled sheet steel with an IP65 sealing gasket, designed for 1000 x 900 mm switchboard structures with 600 mm equipment and 400 mm internal cable compartments.
£236.30
The ABB PTBO1491 is a durable IP65-compatible open bottom cover for electrical distribution enclosures, designed for use with the ABB System pro E Power switchboard system. Manufactured from pickled sheet steel and equipped with an IP65 sealing gasket, this enclosure accessory provides a robust solution for cable entry arrangements in low-voltage electrical distribution installations.
As part of ABB's modular System pro E Power range, the PTBO1491 is specifically designed for switchboard structures incorporating an internal cable compartment. Its open configuration accommodates separate cable entry areas while allowing the installation of dedicated fixed cable entry flanges to complete the enclosure sealing arrangement. This modular construction helps simplify switchboard assembly, cable management and installation.
With an overall width of 1000 mm, comprising a 600 mm equipment compartment and a 400 mm internal cable compartment, and a depth of 900 mm, the PTBO1491 is suitable for large electrical distribution cabinets. When installed with the appropriate ABB fixed cable entry flanges and sealing components, the assembly can achieve an IP65 protection rating against dust ingress and water jets.
The ABB PTBO1491 forms part of the external covering system used in System pro E Power low-voltage distribution switchboards. Its steel construction provides a durable enclosure component, while the integrated gasket supports the sealing requirements of electrical installations where protection against dust and water ingress is important.
The open cover is designed to accommodate separate cable entry sections for the equipment compartment and the internal cable compartment. To achieve the intended IP65 protection level, dedicated fixed cable entry flanges must be installed in both sections. The open cover alone does not provide a complete IP65 enclosure seal.
The modular design allows switchboard manufacturers and electrical panel builders to configure cable access according to installation requirements while maintaining compatibility with the wider ABB System pro E Power enclosure platform. The PTBO1491 can be used as a top or bottom component, with separate units required where both positions need covering.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ002087B0000 |
| Product group | System Pro E Power |
| Product type | Open top/bottom enclosure cover |
| Accessory category | Switchboard external covers and cable entry accessories |
| Protection rating | IP65 when correctly assembled with the required sealing flanges |
| Nominal width | 1000 mm |
| Nominal depth | 900 mm |
| Equipment compartment width | 600 mm |
| Internal cable compartment width | 400 mm |
| Width configuration | 600 + 400 mm |
| Material | Pickled sheet steel |
| Sealing | IP65 gasket |
| Mounting position | Top or bottom of compatible switchboard structures |
| Compatible enclosure system | ABB System pro E Power |
| Cable entry arrangement | Separate equipment and internal cable compartments |
| Required sealing accessories | Compatible ABB PFCF fixed cable entry flanges |
| Compatible internal cable compartment flange | PFCF4091, 400 × 900 mm |
| Packaging quantity | 1 piece |
The ABB PTBO1491 is an open top/bottom cover designed for ABB System pro E Power electrical distribution switchboards with separate equipment and internal cable compartments. It supports cable entry arrangements and enclosure sealing when combined with the appropriate accessories.
The PTBO1491 has a nominal overall width of 1000 mm and a depth of 900 mm. The width is divided into a 600 mm equipment compartment and a 400 mm internal cable compartment.
The PTBO1491 is designed for IP65-compatible enclosure assemblies and includes a sealing gasket. However, the complete IP65 protection rating requires correctly installed ABB fixed cable entry flanges and appropriate enclosure sealing. The open cover alone does not guarantee IP65 protection.
The cover is manufactured from pickled sheet steel, providing a robust metal construction suitable for electrical distribution switchboard assemblies.
The PTBO1491 is designed for the ABB System pro E Power modular low-voltage switchboard range, specifically structures with a 600 + 400 mm compartment configuration and 900 mm depth.
ABB System pro E Power enclosure components are designed to support dependable low-voltage electrical distribution installations. The PTBO1491 provides a durable, modular open cover solution for switchboard builders requiring organised cable entry, compatible enclosure sealing and integration with ABB's System pro E Power platform.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.