Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO1451 (1STQ002085B0000) is an IP65-compatible open bottom panel made from pickled sheet steel for 1000 x 500 mm System pro E Power switchboards with a 600 mm equipment compartment and a 400 mm internal cable compartment.
£197.01
The ABB PTBO1451 (1STQ002085B0000) is a purpose-designed IP65 open bottom panel for ABB System pro E Power low-voltage distribution switchboards. Developed for enclosure structures incorporating a dedicated cable compartment, this modular accessory provides a bottom panel arrangement suitable for cable entry and internal compartment integration in industrial and commercial electrical distribution installations.
As part of the ABB System pro E Power modular switchboard series, the PTBO1451 is specifically configured for a combined enclosure width of 1000 mm, comprising a 600 mm equipment compartment and a 400 mm cable compartment. Its open-bottom construction enables the installation of compatible cable entry flanges and associated enclosure components, supporting organised cable routing while maintaining the intended protective performance of the completed switchboard.
Designed for switchboard structures measuring 1000 mm wide and 500 mm deep, the PTBO1451 is intended for IP65 enclosure configurations when correctly assembled with the required ABB flanges, seals and complementary components. Its dedicated modular design makes it a practical choice for electrical panel builders and switchboard manufacturers seeking reliable component compatibility and efficient enclosure construction.
Low-voltage electrical distribution switchboards require correctly designed enclosure components to protect internal electrical equipment against dust, moisture and environmental contamination. The ABB PTBO1451 open bottom panel provides a dedicated enclosure base arrangement for System pro E Power switchboards incorporating separate equipment and cable compartments. Its open configuration allows compatible cable entry and closure components to be installed according to the requirements of the electrical distribution assembly.
The PTBO1451 is designed for a 1000 mm wide, 500 mm deep enclosure with a 600 mm equipment section and a 400 mm cable compartment. This compartment arrangement helps panel builders organise electrical equipment separately from designated cable routing areas. The open bottom panel must be combined with correctly selected ABB flanges and sealing accessories to achieve the specified IP65 protection of the completed enclosure.
ABB System pro E Power is a modular low-voltage switchboard platform used in assemblies designed and verified in accordance with IEC 61439-1 and IEC 61439-2. The PTBO1451 is a mechanical enclosure accessory rather than a standalone sealed panel or electrical protective device. The final ingress protection, electrical ratings and overall performance depend on the complete switchboard configuration, correct component selection and installation in accordance with ABB's assembly instructions.
| Product group | System pro E Power |
|---|---|
| Series | System pro E Power Main Distribution Switchboards |
| ABB order code | 1STQ002085B0000 |
| Product type | Open bottom panel |
| Component category | Electrical switchboard enclosure bottom panel |
| Nominal overall width | 1000 mm |
| Nominal enclosure depth | 500 mm |
| Equipment compartment width | 600 mm |
| Cable compartment width | 400 mm |
| Compartment arrangement | 600 + 400 mm |
| Panel configuration | Open bottom |
| Protection rating | IP65 when correctly incorporated into a compatible, fully sealed enclosure assembly |
| Dust protection | IP6X, dust-tight assembled enclosure |
| Water protection | IPX5, protection against water jets in the completed enclosure |
| Mounting position | Bottom of compatible switchboard enclosure |
| Cable compartment configuration | Dedicated 400 mm compartment |
| Compatible system | ABB System pro E Power |
| Application | Bottom enclosure construction and cable entry provision |
| Suitable equipment | Low-voltage main distribution switchboards |
The ABB PTBO1451 is an IP65-compatible open bottom panel for ABB System pro E Power low-voltage switchboards. It is designed for enclosure structures with separate equipment and cable compartments, providing a bottom panel arrangement for compatible cable entry and closure components.
The PTBO1451 is designed for a nominal 1000 mm enclosure width and 500 mm depth. The total width is divided into a 600 mm equipment compartment and a 400 mm cable compartment.
The PTBO1451 is designed for IP65 switchboard enclosure configurations. Because it is an open bottom panel, the required compatible flanges, seals and other closure components must be correctly installed for the completed enclosure to achieve IP65 dust and water ingress protection.
The 600 + 400 mm configuration identifies the division of the 1000 mm overall enclosure width into a 600 mm equipment compartment and a 400 mm cable compartment. This arrangement allows electrical equipment and cable routing areas to be organised within the same switchboard structure.
The PTBO1451 is installed at the bottom of a compatible ABB System pro E Power switchboard enclosure. It is intended to work with the corresponding enclosure structure, cable entry flanges and sealing components specified for the required installation.
ABB System pro E Power enclosure accessories support reliable modular switchboard construction for industrial and commercial electrical distribution. The PTBO1451 IP65-compatible open bottom panel provides a purpose-designed solution for 1000 mm wide enclosures with separate equipment and cable compartments, helping panel builders create organised cable entry arrangements and professionally engineered low-voltage distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.