Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO1271 (1STQ002082B0000) is an IP65-designated open bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchboards, specified with a 700 mm depth, W=1000(600+200) width notation and CC configuration designation.
£210.30
The ABB PTBO1271 (1STQ002082B0000) is a purpose-designed IP65-designated open bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchboard assemblies. The manufacturer's specification identifies a 1000 mm nominal width, an 800 mm combined sectional width (600 mm + 200 mm), and a 700 mm depth. The accessory is intended for the designated CC configuration within the System Pro E Power enclosure range.
As part of ABB's modular switchboard accessory portfolio, the PTBO1271 open bottom panel supports the construction of electrical distribution enclosures requiring the manufacturer's specified lower enclosure arrangement. Its open configuration is intended for applications where the bottom of the switchboard must accommodate the corresponding installation layout, while the product's dimensional designation helps panel builders identify the appropriate component for their assembly.
The IP65 designation indicates that the PTBO1271 belongs to an enclosure configuration designed for the corresponding degree of ingress protection. Because the component has an open bottom arrangement, the completed switchboard's protection depends on the correct installation of associated enclosure components, cable-entry provisions and sealing measures. The PTBO1271 offers a manufacturer-specific solution for professional electrical panel builders working with compatible System Pro E Power assemblies.
The ABB System Pro E Power range provides a modular platform for constructing professional low-voltage electrical switchboards and power distribution assemblies. Its range of structural components, enclosure panels and accessories enables panel builders to select compatible parts according to the required enclosure dimensions, internal configuration and environmental protection objectives.
The ABB PTBO1271 is identified as an IP65 open bottom accessory with a specified 700 mm depth. The manufacturer's width notation is W=1000(600+200). Because the stated nominal width and the sum of the sectional dimensions differ, installers should preserve this designation when ordering and confirm the intended enclosure arrangement using the applicable ABB technical drawings rather than assuming that the figures describe a simple overall-width calculation.
An open bottom arrangement may be required where the switchboard installation incorporates a designated lower access or cable-entry configuration. The suitability of the arrangement depends on the complete assembly, including the enclosure structure, cable routing, supporting components and any protective provisions required around the lower opening. The PTBO1271 should therefore be selected as part of a coordinated System Pro E Power design.
The IP65 classification describes dust-tight protection and resistance to water jets under the applicable test conditions. However, the PTBO1271 does not independently provide an IP65 rating for an entire switchboard. Any openings, cable penetrations or interfaces with adjoining components must be addressed through the correct manufacturer-specified installation and sealing arrangement. The final ingress protection rating must be established for the completed enclosure.
The CC designation forms part of the ABB product description and identifies the intended manufacturer configuration. Its precise meaning and the corresponding assembly requirements should be verified using ABB System Pro E Power documentation. This is particularly important when selecting components for combined or sectional enclosure arrangements, where similar accessories may have different dimensional requirements.
Selecting the correct ABB accessory helps maintain mechanical compatibility and consistency within modular electrical distribution systems. The PTBO1271 is a dedicated open bottom component for its specified enclosure configuration, not an independent electrical safety device. Installation should follow ABB instructions, and the completed switchboard should be assessed against the applicable IEC/EN 61439 requirements and any project-specific enclosure protection criteria.
| Product group | System Pro E Power |
|---|---|
| Product designation | PTBO1271 |
| ABB order code | 1STQ002082B0000 |
| Product type | Open bottom enclosure accessory |
| Accessory category | Electrical switchboard bottom enclosure components |
| Manufacturer nominal width designation | 1000 mm |
| Sectional width designation | 600 mm + 200 mm |
| Specified depth | 700 mm |
| Manufacturer IP designation | IP65 |
| Bottom configuration | Open |
| Manufacturer configuration designation | CC |
| Installation position | Bottom of compatible switchboard enclosure |
| Enclosure system | ABB System Pro E Power |
| Installation type | Mechanical integration into compatible enclosure assemblies |
| Application | Low-voltage electrical distribution enclosure construction |
| Compatibility | System Pro E Power configurations specified for the PTBO1271 accessory |
| Dimensional verification | The supplied ABB designation states W=1000(600+200); the relationship between the nominal width and sectional dimensions should be confirmed against ABB technical documentation. |
The ABB PTBO1271 is an IP65-designated open bottom enclosure accessory intended for compatible ABB System Pro E Power low-voltage switchboard assemblies. It supports the manufacturer's specified lower enclosure configuration.
The PTBO1271 has a specified depth of 700 mm and a manufacturer width designation of W=1000(600+200). This states a nominal width of 1000 mm alongside sectional figures of 600 mm and 200 mm. Because these figures do not add to the stated nominal width, the exact dimensional arrangement should be verified against ABB technical documentation.
No. The PTBO1271 carries an IP65 manufacturer designation, but the complete switchboard achieves an IP65 rating only when the enclosure components, seals, cable-entry arrangements and installation interfaces are correctly selected, assembled and verified for that protection level.
The 600 mm + 200 mm notation identifies sectional dimensions within the manufacturer's PTBO1271 specification. The same description also states a nominal width of 1000 mm, so the figures should not be interpreted as a straightforward overall-width calculation without consulting the relevant ABB assembly drawings.
The PTBO1271 belongs to the ABB System Pro E Power product group and is intended for compatible low-voltage switchboard configurations requiring an IP65-designated open bottom accessory with a 700 mm depth, the manufacturer's W=1000(600+200) width designation and the CC configuration code.
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PTBO1271 open bottom accessory, ABB order code 1STQ002082B0000, offers an IP65-designated component for compatible 700 mm deep enclosure configurations identified by the manufacturer's W=1000(600+200) and CC designations, supporting structured industrial and commercial electrical distribution installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.