Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002081B0000 ABB PTBO1251 System Pro E Power IP65 Open Bottom 1000 (800+200) x 500 mm CC
ABB PTBO1251 (1STQ002081B0000) is an IP65-designated open bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchboards, specified for a 1000 mm combined width (800 mm + 200 mm), 500 mm depth and CC configuration.
£196.09
Why Choose the ABB PTBO1251 System Pro E Power IP65 Open Bottom Panel?
The ABB PTBO1251 (1STQ002081B0000) is a purpose-designed IP65-designated open bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchboard assemblies. Specified for a combined width of 1000 mm (800 mm + 200 mm) and a depth of 500 mm, this component is intended for the manufacturer's designated CC configuration, supporting the construction of modular electrical distribution enclosures.
As part of the ABB System Pro E Power product range, the PTBO1251 provides a manufacturer-specific bottom enclosure arrangement where an open configuration is required. The combined 800 mm + 200 mm width designation helps identify the intended switchboard layout, while the 500 mm depth supports selection for the corresponding enclosure dimensions.
The manufacturer's IP65 designation identifies the PTBO1251 for use in compatible assemblies designed to achieve the corresponding degree of enclosure protection. Because this is an open bottom configuration, the completed switchboard's ingress protection depends particularly on the associated enclosure components, cable-entry arrangements, seals and installation method. The PTBO1251 is suitable for professional panel builders specifying the relevant System Pro E Power configuration.
Key Advantages
- Purpose-designed IP65 open bottom accessory for ABB System Pro E Power switchboards.
- 1000 mm combined width for the specified enclosure arrangement.
- 800 mm + 200 mm width configuration clearly identifies the intended modular layout.
- 500 mm specified depth for compatible electrical distribution enclosures.
- Open bottom design for installations requiring the designated lower enclosure arrangement.
- Manufacturer-designated IP65 application for compatible protected switchboard assemblies.
- ABB-specific component design supports consistent modular enclosure construction.
- Suitable for industrial distribution, commercial switchboards and professional electrical panel building.
Key Features
- ABB System Pro E Power product family.
- PTBO1251 open bottom designation.
- ABB order code 1STQ002081B0000.
- 1000 mm specified combined width.
- 800 mm + 200 mm width arrangement.
- 500 mm specified depth.
- IP65 manufacturer designation.
- Open bottom configuration for the intended enclosure assembly.
- CC manufacturer configuration designation.
IP65 Open Bottom Configuration for 1000 mm Wide Switchboard Assemblies
The ABB System Pro E Power range provides a modular platform for constructing professional low-voltage electrical switchboards and power distribution assemblies. Its selection of structural components, enclosure panels and installation accessories enables panel builders to configure switchboards according to the required dimensions, internal arrangement and environmental protection specifications.
The ABB PTBO1251 open bottom accessory is specified for a 1000 mm combined width, consisting of an 800 mm + 200 mm arrangement, and a 500 mm depth. These dimensions distinguish the component from other bottom enclosure variants and help installers select the appropriate accessory for the intended modular switchboard configuration.
An open bottom arrangement may be specified where the switchboard design requires a designated lower opening as part of its installation and cable-management strategy. The suitability of that arrangement depends on the complete enclosure design, including the intended cable routing, associated bottom components and any protective measures needed to maintain the required environmental performance.
The IP65 designation corresponds to dust-tight protection and protection against water jets under the applicable test conditions. However, an open bottom component does not independently establish an IP65 rating for the completed switchboard. Any lower openings, cable penetrations or installation interfaces must be addressed using the appropriate manufacturer-approved assembly arrangement and verified protection measures.
The CC designation forms part of the manufacturer's product specification and should be matched to the relevant ABB System Pro E Power configuration. The exact meaning of this configuration code, together with the required fixing and sealing arrangements, should be confirmed against the applicable ABB assembly documentation rather than assumed from the abbreviation alone.
Selecting manufacturer-specified enclosure accessories helps maintain mechanical compatibility within modular switchboard systems. The PTBO1251 provides a dedicated ABB option for the relevant combined-width, open-bottom arrangement. The completed installation should be assembled and assessed in accordance with the applicable ABB instructions and relevant IEC/EN 61439 requirements.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Compatible 1000 mm wide × 500 mm deep enclosure arrangements.
- Modular switchboard layouts with an 800 mm + 200 mm width configuration.
- Electrical distribution enclosures requiring the specified open bottom arrangement.
- Compatible switchboard installations with an IP65 design requirement.
- Industrial power distribution cabinets and electrical control assemblies.
- Commercial building electrical distribution systems.
- Professional panel building, enclosure assembly and compatible component replacement.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PTBO1251 |
| ABB order code | 1STQ002081B0000 |
| Product type | Open bottom enclosure accessory |
| Accessory category | Electrical switchboard bottom enclosure components |
| Specified overall width | 1000 mm |
| Width configuration | 800 mm + 200 mm |
| Specified depth | 500 mm |
| Manufacturer IP designation | IP65 |
| Bottom configuration | Open |
| Manufacturer configuration designation | CC |
| Installation position | Bottom of compatible switchboard enclosure |
| Enclosure system | ABB System Pro E Power |
| Installation type | Mechanical integration into compatible enclosure assemblies |
| Application | Low-voltage electrical distribution enclosure construction |
| Compatibility | System Pro E Power configurations specified for the PTBO1251 accessory |
Frequently Asked Questions
What is the ABB PTBO1251 1STQ002081B0000 used for?
The ABB PTBO1251 is an IP65-designated open bottom enclosure accessory intended for compatible ABB System Pro E Power low-voltage switchboard assemblies. It supports the specified lower enclosure arrangement for a combined-width configuration.
What are the dimensions of the ABB PTBO1251?
The PTBO1251 is specified for an overall width of 1000 mm, arranged as 800 mm + 200 mm, and a depth of 500 mm. These dimensions identify the intended enclosure configuration.
Does the ABB PTBO1251 make a switchboard IP65?
No. The PTBO1251 carries an IP65 manufacturer designation, but the complete switchboard achieves an IP65 rating only when the associated enclosure components, seals, cable-entry arrangements and installation interfaces are correctly selected, assembled and verified for that protection level.
What does the 800 mm + 200 mm width configuration mean?
The 800 mm + 200 mm designation identifies the combined-width arrangement associated with the PTBO1251, giving a total specified width of 1000 mm. The exact relationship between the enclosure sections should be confirmed against the relevant ABB System Pro E Power assembly documentation.
Which ABB enclosure system is compatible with the PTBO1251?
The PTBO1251 belongs to the ABB System Pro E Power product group and is intended for compatible low-voltage switchboard configurations requiring a 1000 mm combined-width, 500 mm deep, IP65-designated open bottom accessory with the manufacturer's CC designation.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PTBO1251 open bottom accessory, ABB order code 1STQ002081B0000, offers an IP65-designated component for compatible 1000 mm (800 mm + 200 mm) wide and 500 mm deep enclosure configurations used in industrial and commercial electrical distribution systems.
