Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBO8231 is a System pro E power IP65-designated open-bottom enclosure accessory for a switchboard configuration measuring 800 mm wide in 600 mm and 200 mm sections and 300 mm deep, identified by order code 1STQ002076B0000.
£116.82
The ABB PTBO8231 IP65 Open Bottom is a specialist enclosure accessory for the ABB System pro E power modular low-voltage switchboard system. Identified by ABB order code 1STQ002076B0000, this component carries the manufacturer designation IP65 OPEN BOTTOM W=800(600+200) D=300 CC, specifying an open-bottom arrangement for an enclosure configuration with a combined width of 800 mm and a depth of 300 mm.
The designated width comprises a 600 mm main section and an additional 200 mm section, making the PTBO8231 relevant to compatible System pro E power assemblies using this combined compartment arrangement. The product is identified for an IP65 enclosure configuration, where correctly selected and installed enclosure components contribute to the intended environmental protection of the complete switchboard.
Bottom enclosure components are important in switchboard construction because they form part of the mechanical enclosure arrangement and must accommodate the installation requirements of associated cables, compartments and structural elements. The ABB PTBO8231 provides a manufacturer-specific open-bottom solution for compatible electrical distribution equipment.
For panel builders, electrical contractors and maintenance engineers, selecting the correct enclosure accessory helps maintain dimensional compatibility and the intended assembly configuration. The PTBO8231 provides a clearly identified ABB component for professional switchboard construction, servicing and replacement applications.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical switchboards. Its enclosure system allows compatible structural components, panels, compartments and accessories to be selected according to the dimensions and installation requirements of the completed electrical assembly.
The PTBO8231 is specifically designated for an 800 mm wide × 300 mm deep enclosure configuration, with the width divided into 600 mm and 200 mm sections. This defined arrangement helps panel builders identify the correct open-bottom accessory for the corresponding switchboard structure.
The manufacturer's IP65 designation indicates the intended enclosure protection configuration. Under IEC 60529, IP65 describes dust-tight protection and protection against water jets for an appropriately constructed and tested enclosure. However, the final ingress protection of an installed switchboard depends on the complete enclosure assembly, including its bottom arrangement, seals, cable-entry provisions and installation details. An open-bottom component alone does not establish IP65 protection.
For correct installation, the ABB PTBO8231 should be combined with the appropriate System pro E power enclosure components and fitted according to the relevant ABB assembly instructions. The supplied product designation does not independently confirm the component's material, thickness, finish, supplied fixing hardware or the meaning of the CC configuration suffix. These details should be verified against the applicable manufacturer documentation where necessary.
The ABB PTBO8231 is an open-bottom enclosure accessory for compatible System pro E power switchboards. It is designated for an IP65 enclosure configuration with a combined width of 800 mm and a depth of 300 mm.
The manufacturer designation specifies a width of 800 mm, comprising 600 mm + 200 mm sections, and a depth of 300 mm. These values identify the intended enclosure configuration rather than necessarily representing the exact overall dimensions of the supplied component.
The PTBO8231 is designated for an IP65 enclosure arrangement. However, the completed switchboard's ingress protection depends on the correct installation of all enclosure components, seals and cable-entry provisions. The open-bottom accessory alone does not provide an independently verified IP65 enclosure rating.
No. The PTBO8231 is intended for a specific 800 mm (600 mm + 200 mm) wide and 300 mm deep enclosure configuration. Compatibility must be confirmed against the applicable ABB System pro E power assembly documentation.
The ABB manufacturer order code is 1STQ002076B0000. The product reference is PTBO8231, with the designation IP65 OPEN BOTTOM W=800(600+200) D=300 CC, belonging to the ABB System pro E power product group.
ABB System pro E power enclosure accessories support consistent construction and maintenance of compatible modular electrical distribution assemblies. The PTBO8231 provides a manufacturer-identified open-bottom component for an IP65-designated enclosure configuration measuring 800 mm wide and 300 mm deep, helping panel builders select the correct ABB accessory for the intended switchboard arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.