Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PSVS2091 rear vertical segregation kit for recessed plate configurations in System pro E power low-voltage switchboards, designed for a 200 mm height and 900 mm enclosure depth.
£99.90
The ABB PSVS2091 is a purpose-designed rear vertical segregation kit for recessed plates, developed for use within the ABB System pro E power low-voltage switchboard enclosure system. Designed for switchboard compartmentalisation and internal separation, this accessory supports the organised arrangement of electrical equipment and functional areas within industrial and commercial power distribution assemblies.
As part of ABB's modular System pro E power range, the PSVS2091 provides a practical solution for incorporating rear vertical segregation into compatible switchboard configurations. Its dedicated design supports structured panel construction, helping switchboard manufacturers and electrical installers establish defined internal separation arrangements while accommodating recessed mounting plates.
The PSVS2091 is specified for a 200 mm height and 900 mm enclosure depth, making it suitable for compatible deeper System pro E power switchboard configurations. Its recessed-plate arrangement enables integration with the corresponding ABB enclosure architecture. The kit is identified by ABB order code 1STQ002058B0000, supporting accurate product selection, procurement and replacement.
Internal segregation is an important aspect of low-voltage switchboard design, helping establish defined compartments and supporting the physical organisation of electrical equipment, functional units and distribution components. Properly selected segregation accessories contribute to structured assembly construction and help switchboard manufacturers implement the intended internal separation arrangement.
The ABB PSVS2091 rear vertical segregation kit is specifically intended for compatible System pro E power configurations incorporating recessed plates. Its 200 mm height and 900 mm enclosure depth compatibility make it suitable for the corresponding deeper switchboard arrangements where rear vertical segregation is required.
The ABB System pro E power range provides a modular platform for constructing low-voltage power distribution and control assemblies. Its coordinated enclosure components and internal accessories allow switchboard builders to develop configurations suited to different electrical installation requirements. The PSVS2091 forms part of this accessory system, supporting consistent mechanical integration and organised compartmentalisation.
As a mechanical segregation accessory, the PSVS2091 does not independently provide electrical circuit protection or establish a particular form of separation. The completed switchboard's internal separation classification, protection characteristics and compliance depend on the complete assembly design, associated components and applicable ABB installation instructions.
| Product range | System pro E power |
|---|---|
| ABB order code | 1STQ002058B0000 |
| Product type | Rear vertical segregation kit |
| Accessory category | Internal switchboard segregation and separation |
| Segregation position | Rear vertical |
| Mounting arrangement | Recessed plate configuration |
| Specified height | 200 mm |
| Compatible enclosure depth | 900 mm |
| Application | Low-voltage electrical switchboard assemblies |
| Installation location | Inside compatible System pro E power enclosures |
| System compatibility | ABB System pro E power |
| Component function | Internal vertical segregation |
| Product classification | Mechanical switchboard accessory |
The ABB PSVS2091 is a rear vertical segregation kit designed to provide internal separation within compatible ABB System pro E power low-voltage switchboard assemblies incorporating recessed plate configurations.
The PSVS2091 is specified for a 200 mm height and a 900 mm enclosure depth. These values identify its intended segregation arrangement and compatible switchboard configuration.
The PSVS2091 belongs to the ABB System pro E power range of modular low-voltage switchboard accessories. Compatibility with a particular enclosure should be checked against the relevant ABB assembly configuration and installation documentation.
Yes. The PSVS2091 is specifically identified as a rear vertical segregation kit for recessed plate arrangements, making it suitable for the corresponding System pro E power switchboard configurations.
Both products are rear vertical segregation kits for recessed plate arrangements with a specified height of 200 mm. The PSVS2091 is designed for a 900 mm enclosure depth, whereas the PSVS2071 is designed for a 700 mm enclosure depth.
No. The PSVS2091 is a mechanical accessory intended for internal switchboard segregation. It does not replace circuit breakers, fuses or other electrical protective devices, and the final separation and protection characteristics depend on the complete switchboard assembly.
The ABB manufacturer order code is 1STQ002058B0000. This reference can be used when specifying, ordering or identifying the correct PSVS2091 rear vertical segregation kit.
ABB System pro E power accessories support the construction of organised, modular low-voltage switchboard assemblies. The PSVS2091 rear vertical segregation kit provides a dedicated solution for compatible recessed-plate arrangements requiring a 200 mm height and 900 mm enclosure depth, helping panel builders achieve consistent internal separation and professional assembly integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.