Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002054B0000 ABB PFCF4071 System Pro E Power IP65 Fixed Flange for Internal Cable Compartment 400 x 700 mm
ABB PFCF4071 (1STQ002054B0000) is an IP65-designated fixed flange accessory for compatible ABB System Pro E Power low-voltage switchboard internal cable compartment configurations measuring 400 mm wide and 700 mm deep.
£39.42
Why Choose the ABB PFCF4071 System Pro E Power IP65 Fixed Flange?
The ABB PFCF4071 (1STQ002054B0000) is a purpose-designed IP65 fixed flange accessory for compatible ABB System Pro E Power low-voltage switchboard assemblies. Specified for a 400 mm width and 700 mm depth, this component is intended for the manufacturer's internal cable compartment configuration, supporting the mechanical construction and completion of the relevant electrical distribution enclosure arrangement.
As part of the ABB System Pro E Power product range, the PFCF4071 provides a manufacturer-specific fixed flange solution for switchboard installations where cable compartment construction, enclosure compatibility and ingress protection requirements must be considered together. Its fixed configuration supports integration into the designated assembly, helping electrical panel builders maintain consistent mechanical arrangements within modular electrical distribution systems.
The manufacturer's IP65 designation identifies the PFCF4071 as an accessory intended for compatible enclosure configurations requiring the corresponding degree of protection. With its specified 400 mm × 700 mm dimensions, this flange is particularly relevant to panel builders working with the designated System Pro E Power internal cable compartment arrangement. The protection performance of the completed switchboard depends on the correct combination of enclosure components, seals, fixings and installation procedures.
Key Advantages
- Purpose-designed IP65 fixed flange for ABB System Pro E Power switchboards.
- 400 mm specified width for the intended internal cable compartment configuration.
- 700 mm specified depth for compatible enclosure assemblies.
- Designed specifically for the manufacturer's internal cable compartment application.
- Fixed flange configuration for integration into the designated mechanical arrangement.
- Manufacturer-designated IP65 application for compatible protected switchboard enclosures.
- ABB-specific component selection helps maintain consistency across modular enclosure assemblies.
- Suitable for professional electrical panel building, industrial power distribution and compatible maintenance projects.
Key Features
- ABB System Pro E Power product family.
- PFCF4071 fixed flange designation.
- ABB order code 1STQ002054B0000.
- 400 mm specified width.
- 700 mm specified depth.
- IP65 manufacturer designation.
- Fixed flange arrangement for compatible enclosure construction.
- Internal cable compartment application.
- Mechanical enclosure accessory for compatible low-voltage electrical distribution assemblies.
IP65 Fixed Flange Integration for 700 mm Deep Cable Compartments
The ABB System Pro E Power range provides a modular platform for constructing professional low-voltage electrical switchboards and power distribution assemblies. Its selection of structural components, enclosure panels and cable compartment accessories enables electrical panel builders to develop installations according to the required enclosure dimensions, internal arrangement and environmental protection specifications.
The ABB PFCF4071 fixed flange is specified for an internal cable compartment arrangement measuring 400 mm in width and 700 mm in depth. These dimensions distinguish it from other fixed flange variants within the System Pro E Power range and help installers select the correct accessory for the intended switchboard configuration.
Internal cable compartments provide designated areas for routing, organising and terminating electrical conductors within low-voltage distribution assemblies. The mechanical components used in these areas must be selected to suit the complete enclosure structure, including the relationship between compartment boundaries, cable access arrangements and protective enclosure surfaces. The PFCF4071 supports the specified fixed flange configuration within this broader assembly.
The IP65 designation corresponds to protection against dust ingress and water jets under the applicable test conditions. However, the PFCF4071 does not independently establish an IP65 rating for an entire switchboard. The achieved degree of protection depends on the complete enclosure configuration, compatible sealing arrangements, associated components and correct treatment of any cable entry openings.
Using a manufacturer-specified flange helps preserve mechanical compatibility within modular electrical distribution systems. The PFCF4071 provides a dedicated ABB component for the relevant 700 mm deep cable compartment arrangement, reducing the need for non-standard enclosure modifications. Panel builders should verify the required mounting and sealing details against ABB documentation and assess the completed assembly against applicable IEC/EN 61439 requirements.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Internal cable compartment configurations requiring a fixed flange.
- Compatible 400 mm wide × 700 mm deep enclosure arrangements.
- Electrical distribution cabinets with an IP65 design requirement.
- Industrial power distribution and electrical control installations.
- Commercial building main and sub-distribution switchboards.
- Professional electrical panel building and modular enclosure construction.
- Maintenance and replacement of compatible internal cable compartment flange components.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PFCF4071 |
| ABB order code | 1STQ002054B0000 |
| Product type | Fixed flange |
| Accessory category | Electrical switchboard cable compartment accessories |
| Specified width | 400 mm |
| Specified depth | 700 mm |
| Manufacturer IP designation | IP65 |
| Flange configuration | Fixed |
| Intended application | Internal cable compartment |
| Enclosure system | ABB System Pro E Power |
| Installation type | Mechanical integration into compatible switchboard assemblies |
| Application | Low-voltage electrical distribution enclosure construction |
| Compatibility | System Pro E Power configurations specified for the PFCF4071 fixed flange |
Frequently Asked Questions
What is the ABB PFCF4071 1STQ002054B0000 used for?
The ABB PFCF4071 is an IP65-designated fixed flange accessory intended for the internal cable compartment of compatible ABB System Pro E Power low-voltage switchboard assemblies. It supports the specified mechanical enclosure arrangement.
What are the dimensions of the ABB PFCF4071?
The PFCF4071 is specified for a width of 400 mm and a depth of 700 mm. These dimensions identify the intended enclosure configuration within the ABB System Pro E Power range.
Does the ABB PFCF4071 provide IP65 protection on its own?
No. The PFCF4071 carries an IP65 manufacturer designation, but the complete switchboard achieves an IP65 rating only when the relevant enclosure components, seals, fixings and cable entry arrangements are correctly selected, installed and verified for that protection level.
What is the difference between the ABB PFCF4071 and PFCF4051?
The main difference is the specified depth. The PFCF4071 is intended for a 400 mm wide × 700 mm deep configuration, while the PFCF4051 is intended for a 400 mm wide × 500 mm deep configuration. Both are IP65-designated fixed flange accessories for compatible ABB System Pro E Power internal cable compartments.
Which ABB enclosure system is compatible with the PFCF4071?
The PFCF4071 belongs to the ABB System Pro E Power product group and is intended for compatible low-voltage switchboard configurations requiring a 400 mm wide, 700 mm deep IP65 fixed flange arrangement for an internal cable compartment. Compatibility should be checked against the specified enclosure assembly and ABB installation instructions.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PFCF4071 fixed flange, ABB order code 1STQ002054B0000, offers a dedicated IP65-designated accessory for compatible 400 mm × 700 mm internal cable compartment arrangements used in industrial and commercial electrical distribution systems.
