Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PFCF2091 Fixing Flange, order code 1STQ002051B0000, is a System Pro E Power cabinet accessory specified for a P65 internal cabinet configuration with a 200 mm width and 900 mm depth reference.
£35.86
The ABB PFCF2091, manufacturer order code 1STQ002051B0000, is a dedicated fixing flange accessory from the ABB System Pro E Power product group. Identified by the manufacturer designation FIX.FLANGE P65 IN.CAB.COM.W200MM D900MM, this component is specified for a cabinet configuration with a width of 200 mm and depth of 900 mm.
Fixing flanges are mechanical accessories used in electrical cabinet and switchgear assembly construction to provide a designated fixing or connection interface between compatible structural components. The ABB PFCF2091 Fixing Flange is identified for a P65 internal cabinet configuration, supporting accurate selection of the required component for the corresponding ABB assembly arrangement.
As part of the ABB System Pro E Power range, the PFCF2091 is intended for professional low-voltage electrical distribution panel construction, cabinet assembly and equipment maintenance projects. Its clearly defined 200 mm width and 900 mm depth references help panel builders identify the intended cabinet configuration, while ABB order code 1STQ002051B0000 supports accurate procurement and replacement-part identification.
Electrical distribution cabinets require correctly selected mechanical components to ensure that their structural arrangements correspond to the intended equipment design. Fixing flanges can form part of the mechanical interface between compatible cabinet components, helping establish the specified fixing arrangement during assembly and installation.
The ABB PFCF2091 Fixing Flange is identified for a cabinet configuration with a 200 mm width and 900 mm depth. These dimensions are included in the manufacturer designation and should be understood as references to the intended cabinet arrangement rather than confirmed physical dimensions of the flange itself.
The designation also includes P65 and IN.CAB.COM., identifying a particular manufacturer-specified configuration. These references are important when selecting accessories for ABB System Pro E Power assemblies, as components intended for different cabinet configurations may not be mechanically interchangeable.
The ABB PFCF2091 should be selected according to the applicable ABB assembly drawings and installation instructions. Panel builders must verify the exact cabinet model, fixing positions, connection interfaces and compatibility with adjacent structural components before installation.
Correct mechanical assembly is important in low-voltage distribution equipment. Structural components must be installed so that they do not compromise electrical clearances, cable routing, access to equipment, protective barriers or the intended mechanical integrity of the completed switchboard.
The supplied product designation does not establish the flange's material, thickness, finish, fixing hole pattern, load capacity or individual physical dimensions. These characteristics should be confirmed using the relevant ABB technical documentation before installation.
The ABB System Pro E Power product group supports the construction of professional low-voltage electrical distribution assemblies. Selecting the correct cabinet accessories is an important part of maintaining compatibility between structural components, equipment mounting arrangements and the intended installation configuration.
The ABB PFCF2091 Fixing Flange provides a manufacturer-identified component for the specified P65 cabinet arrangement. Its model and order code enable installers to distinguish it from fixing flanges intended for other cabinet widths, depths or assembly configurations.
Although the product designation contains the reference P65, this should not automatically be interpreted as an IP65 ingress protection rating. The exact meaning of P65 must be confirmed from ABB documentation, and the ingress protection of any completed cabinet depends on the full assembly and its installation.
Likewise, the abbreviation IN.CAB.COM. should be treated as a manufacturer configuration reference unless its expanded meaning is established from the applicable ABB technical information.
For replacement or refurbishment projects, the existing component reference should be checked against ABB order code 1STQ002051B0000. The completed electrical assembly should be designed, installed and verified according to the relevant manufacturer requirements and applicable low-voltage switchgear standards, including BS EN IEC 61439 where relevant.
The ABB PFCF2091 is a fixing flange accessory for compatible ABB System Pro E Power electrical cabinet assemblies. It is specified for a P65 cabinet configuration with a 200 mm width and 900 mm depth reference, providing the designated mechanical fixing component for the corresponding assembly.
W200MM indicates a specified cabinet width of 200 mm, while D900MM indicates a cabinet depth of 900 mm. These references identify the intended cabinet configuration and should not be assumed to represent the physical dimensions of the fixing flange itself.
Not necessarily. P65 is included in the manufacturer's product designation, but the supplied specification does not confirm that it represents an IP65 ingress protection rating. The exact configuration reference and any applicable ingress protection requirements should be verified using ABB technical documentation.
No. The ABB PFCF2091 Fixing Flange is identified for a specific cabinet arrangement with 200 mm width and 900 mm depth references. Compatibility with the exact cabinet model, structural components and fixing arrangement must be confirmed before installation.
The manufacturer order code is 1STQ002051B0000. This identifies the ABB PFCF2091 FIX.FLANGE P65 IN.CAB.COM.W200MM D900MM within the ABB System Pro E Power product group.
ABB System Pro E Power accessories provide electrical contractors, switchboard manufacturers and panel builders with manufacturer-identified components for compatible low-voltage distribution assemblies. The ABB PFCF2091 Fixing Flange, order code 1STQ002051B0000, offers a dedicated mechanical fixing accessory for the specified P65 cabinet configuration with 200 mm width and 900 mm depth references, supporting professional electrical cabinet construction, maintenance and replacement projects.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.