Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PUPM2002 System pro E Power structural upright set, order code 1STQ002032B0000, comprising 2 galvanised and 2 stainless steel uprights with a nominal height of 2000 mm for compatible low-voltage switchgear cabinet frameworks.
£722.68
The ABB PUPM2002 is a dedicated switchgear upright set within the ABB System pro E Power range, comprising 2 galvanised uprights and 2 stainless steel uprights, each specified with a nominal height of 2000 mm. Designed for compatible modular low-voltage switchgear structures, this component set supports the construction of cabinet framework arrangements used in professional electrical distribution assemblies.
As part of the ABB System pro E Power modular switchgear platform, the PUPM2002 provides a manufacturer-defined combination of galvanised and stainless steel structural uprights. Uprights are important elements of compatible cabinet frameworks, helping establish the vertical structure required for the integration of enclosure components, mounting arrangements and other switchgear accessories.
Identified by ABB order code 1STQ002032B0000, the PUPM2002 offers a clearly specified component combination for professional panel builders and switchgear manufacturers. Its 2000 mm nominal height and mixed-material upright configuration distinguish it from alternative framework components within the System pro E Power range, helping ensure accurate product selection for the intended cabinet design.
Specification note: The supplied manufacturer description confirms the quantity, material designations and nominal height of the uprights. It does not specify stainless steel grade, galvanised coating specification, upright cross-section, load capacity, fixing hardware or additional package contents. These details should be confirmed against the applicable ABB technical documentation.
Vertical uprights are important components in modular low-voltage switchgear construction. When assembled with compatible horizontal framework members and associated structural accessories, they contribute to the cabinet framework used to support enclosure panels, equipment mounting arrangements and other switchboard components. Correct upright selection is therefore an important part of establishing the intended mechanical configuration.
The ABB PUPM2002 provides a defined combination of 2 galvanised uprights and 2 stainless steel uprights, with a specified height of 2000 mm. This mixed-material configuration should be installed according to ABB's intended framework arrangement. The material designation of each upright is relevant to component identification, but the exact positioning and function of the individual uprights must be established from the applicable assembly instructions.
During installation, panel builders should verify compatibility with the selected System pro E Power framework, cross-members, enclosure panels and mounting accessories. Structural alignment, mechanical fastening, protective bonding and the requirements of the completed electrical assembly should be considered. The PUPM2002 upright set alone does not establish the mechanical load rating, ingress protection or electrical performance of the finished cabinet; these depend on the complete assembly design and applicable verification requirements, including relevant parts of IEC 61439.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ002032B0000 |
| Product type | Switchgear structural upright set |
| Manufacturer description | 2 GALV.+2 STAINL.STEEL UPRIGHTS H=2000MM |
| Total specified uprights | 4 |
| Galvanised uprights | 2 |
| Stainless steel uprights | 2 |
| Nominal height (H) | 2000 mm |
| Component materials | Galvanised metal and stainless steel, as designated by ABB |
| Compatible switchgear range | ABB System pro E Power |
| Application | Structural framework construction for compatible low-voltage switchgear cabinets |
| Product category | Switchgear framework uprights and structural accessories |
The ABB PUPM2002 is a structural upright set for compatible ABB System pro E Power low-voltage switchgear cabinets. It provides vertical framework components used in the construction of appropriately designed modular electrical distribution assemblies.
The manufacturer's description specifies 4 uprights in total, comprising 2 galvanised uprights and 2 stainless steel uprights.
The ABB PUPM2002 uprights have a specified nominal height of 2000 mm. The manufacturer identifies this dimension as H=2000MM.
The PUPM2002 contains two uprights designated as galvanised and two designated as stainless steel. These are different material or surface-treatment specifications. The precise stainless steel grade, galvanised coating characteristics and intended position of each upright should be confirmed using ABB's applicable technical and assembly documentation.
The PUPM2002 belongs to the ABB System pro E Power range and is intended for compatible framework configurations. Its suitability for a particular cabinet must be confirmed against ABB's assembly instructions, including the required framework dimensions, connecting components and mounting arrangement.
ABB System pro E Power structural accessories support the construction of coordinated modular low-voltage switchgear assemblies. The PUPM2002 provides a defined set of 2 galvanised and 2 stainless steel uprights at 2000 mm nominal height, helping professional panel builders select the appropriate framework components for compatible cabinet configurations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.