Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002020B0000 ABB PPFB4580 Flat Blind Panel 450 x 800 mm System pro E Power
ABB PPFB4580 is a flat blind panel measuring 450 mm high and 800 mm wide for compatible System pro E Power low-voltage electrical switchboard assemblies.
£63.34
Why Choose the ABB PPFB4580 Flat Blind Panel?
The ABB PPFB4580 Flat Blind Panel is a dedicated switchboard accessory within the ABB System pro E Power range of low-voltage electrical distribution equipment. Featuring a nominal height of 450 mm and width of 800 mm, this flat blind panel is intended for compatible switchboard configurations requiring a correctly dimensioned blanking panel.
Blind panels are important components in professional electrical switchboard construction, providing physical coverage for designated areas where a compartment section requires a blank panel rather than an equipment-specific mounting interface. The PPFB4580 offers a flat panel configuration for incorporation into appropriately designed System pro E Power assemblies, helping panel builders achieve an organised, consistent and professionally finished switchboard layout.
Identified by ABB manufacturer order code 1STQ002020B0000, the PPFB4580 provides a specific product reference for electrical contractors, switchboard manufacturers and system integrators. Its 450 mm × 800 mm nominal dimensions support accurate component selection, while the exact mounting arrangement, material, finish and compatibility with individual switchboard configurations should be confirmed against the relevant ABB technical documentation.
Key Advantages
- Purpose-designed flat blind panel for compatible ABB System pro E Power switchboards.
- 450 mm nominal height for the specified panel arrangement.
- 800 mm nominal width for compatible switchboard configurations.
- Provides physical coverage for designated areas within electrical switchboard assemblies.
- Supports organised and consistent electrical distribution panel layouts.
- Flat blind panel design offers a dedicated blanking solution where equipment-specific mounting panels are not required.
- Suitable for integration with appropriately selected ABB System pro E Power structural components.
- Supports professional switchboard assembly and electrical panel building.
- Relevant to industrial and commercial low-voltage electrical distribution installations.
- Dedicated ABB manufacturer order code simplifies product identification, specification and procurement.
Key Features
- ABB PPFB4580 flat blind panel.
- Part of the ABB System pro E Power low-voltage switchboard range.
- Flat blind panel product designation.
- 450 mm nominal height.
- 800 mm nominal width.
- Designed for compatible switchboard blanking and panel coverage arrangements.
- Mechanical accessory for professional electrical distribution assemblies.
- Supports coordinated switchboard construction when correctly specified and installed.
- Suitable for integration with compatible ABB switchboard components.
- Relevant to electrical control panel and distribution board construction.
- ABB manufacturer order code: 1STQ002020B0000.
Specification note: The supplied ABB product designation confirms the flat blind panel configuration and nominal dimensions. It does not establish the panel material, thickness, surface finish, fixing method, included mounting hardware or ingress protection performance. These characteristics should be verified against the applicable ABB technical drawings and installation instructions.
Flat Blind Panels in Low-Voltage Electrical Distribution and Control Switchboards
Flat blind panels are used in electrical switchboard construction where a designated section of an assembly requires physical coverage rather than a device-specific mounting arrangement. Depending on the switchboard configuration, blanking panels may be incorporated into compartment layouts to cover unused equipment positions or complete designated panel sections. Correct dimensional selection and compatibility with the supporting structure are essential for achieving the intended mechanical arrangement.
The ABB PPFB4580 provides a flat blind panel with nominal dimensions of 450 mm high × 800 mm wide for compatible System pro E Power configurations. As a mechanical accessory, it does not provide electrical switching, circuit protection or control functions. Installation of the panel alone does not establish a particular ingress protection rating, form of internal separation or electrical safety classification. These characteristics depend on the complete switchboard design, correct component selection and assembly verification in accordance with applicable requirements, including the relevant IEC/EN 61439 standards.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- Blanking of designated areas within compatible electrical distribution panels.
- Switchboard configurations requiring a 450 mm high flat blind panel.
- Compatible panel arrangements with an 800 mm nominal width.
- Industrial electrical power distribution switchboards.
- Commercial building electrical distribution installations.
- Electrical control panel and switchboard manufacturing.
- Mechanical completion of designated switchboard panel sections.
- OEM electrical panel building and system integration.
- Compatible switchboard modification, refurbishment and expansion projects.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ002020B0000 |
| Product type | Flat blind panel |
| Product category | Low-voltage switchboard blanking panels and accessories |
| Nominal height | 450 mm |
| Nominal width | 800 mm |
| Panel configuration | Flat |
| Panel designation | Blind |
| Associated switchboard system | ABB System pro E Power |
| Primary function | Physical coverage of designated areas in compatible switchboard assemblies |
| Application | Low-voltage electrical switchboard construction |
| Manufacturer product designation | FLAT BLIND PANEL H=450MM W=800MM |
Frequently Asked Questions
What is the ABB PPFB4580 used for?
The ABB PPFB4580 is a flat blind panel intended to provide physical coverage for designated areas within compatible ABB System pro E Power low-voltage electrical switchboard assemblies.
What are the dimensions of the ABB PPFB4580?
The PPFB4580 has a nominal height of 450 mm and a nominal width of 800 mm, as specified in the ABB manufacturer product designation.
Which ABB switchboard range is the PPFB4580 designed for?
The PPFB4580 belongs to the ABB System pro E Power product range. Compatibility with individual switchboard frames, compartments and mounting arrangements should be verified against the relevant ABB technical documentation.
What is the difference between the ABB PPFB4580 and PPFB3580?
Both products are flat blind panels within the ABB System pro E Power range and have a nominal width of 800 mm. The PPFB4580 has a nominal height of 450 mm, whereas the PPFB3580 has a nominal height of 350 mm. The correct panel should be selected according to the required switchboard dimensions and verified compatibility.
Does the ABB PPFB4580 provide an IP protection rating on its own?
No individual ingress protection rating is established by the supplied product designation. The achieved IP rating depends on the complete switchboard enclosure, compatible components, installation arrangement and assembly verification. The PPFB4580 should be installed according to the relevant ABB instructions.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power accessories support the construction of organised, professional low-voltage electrical distribution assemblies. The PPFB4580 flat blind panel provides a dedicated 450 mm × 800 mm mechanical coverage component for compatible switchboard configurations, helping electrical panel builders, contractors and system integrators select correctly dimensioned ABB accessories for their projects.
