Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002018B0000 ABB PPFB4560 System pro E Power Flat Blind Panel 450 x 600mm
ABB PPFB4560 flat blind panel for compatible System pro E Power low-voltage switchgear enclosures, specified with a nominal height of 450 mm and width of 600 mm for covering designated cabinet openings.
£56.75
Why Choose the ABB PPFB4560 System pro E Power Flat Blind Panel?
The ABB PPFB4560 is a dedicated flat blind panel designed for compatible ABB System pro E Power low-voltage switchgear assemblies. Specified with a nominal height of 450 mm and width of 600 mm, this enclosure accessory provides a blanking solution for designated openings within modular electrical distribution cabinets and switchboards.
As part of the ABB System pro E Power range, the PPFB4560 supports professional switchgear construction by providing a manufacturer-specific panel for positions where an equipment operating aperture is not required. Flat blind panels help complete the intended enclosure arrangement, cover unused or reserved equipment positions and maintain a consistent external appearance across compatible switchboard sections.
Identified by ABB order code 1STQ002018B0000, the PPFB4560 is suitable for consideration by electrical panel builders, switchgear manufacturers and installation specialists working with System pro E Power assemblies. Its 450 mm height, 600 mm width and flat blind panel designation provide clear selection criteria for compatible industrial and commercial low-voltage distribution projects.
Key Advantages
- ABB System pro E Power compatibility: Part of ABB's modular low-voltage switchgear and enclosure platform.
- Dedicated flat blind panel: Provides a covering solution for compatible unused or reserved enclosure openings.
- 450 mm nominal height: Matches the manufacturer's specified H=450 dimensional configuration.
- 600 mm nominal width: Designed for compatible arrangements requiring a W=600 panel.
- Organised enclosure appearance: Helps maintain a consistent panel layout across modular switchgear sections.
- Defined opening coverage: Supports the intended enclosure construction when installed in an appropriate position.
- Modular assembly support: Allows suitable switchboard positions to be covered without an equipment-specific operating aperture.
- Manufacturer-specific identification: Simplifies the selection of appropriately matched ABB enclosure accessories.
- Professional installation applications: Relevant to industrial, commercial and infrastructure electrical distribution projects.
Key Features
- ABB System pro E Power switchgear enclosure accessory.
- PPFB4560 manufacturer product designation.
- 1STQ002018B0000 ABB order code.
- Flat blind panel configuration.
- 450 mm nominal height.
- 600 mm nominal width.
- Intended for covering designated openings in compatible switchgear enclosures.
- Suitable for positions where an equipment operating aperture is not required.
- Supports structured modular electrical distribution cabinet construction.
- Designed for integration with appropriately selected System pro E Power components.
- Suitable for professional electrical panel building and switchboard assembly.
Specification note: The supplied manufacturer description confirms the panel type and nominal dimensions but does not specify material, finish, thickness, fixing hardware, ingress protection rating or package contents. These details should be verified against the applicable ABB technical documentation before ordering or installation.
Reliable Enclosure Coverage for Modular Switchgear Assemblies
Blind panels are important accessories in modular low-voltage switchgear construction because they provide dedicated covers for enclosure positions that do not require direct access to electrical equipment. Correctly selected panels help complete the intended cabinet arrangement, maintain an orderly external layout and prevent unnecessary openings from remaining exposed in the finished switchboard.
The ABB PPFB4560 is specified as a flat blind panel measuring 450 mm high by 600 mm wide. This configuration allows panel builders to identify a suitable blanking component for compatible System pro E Power installations. Its flat design distinguishes it from specialised covers incorporating equipment cut-outs, operating apertures or other application-specific features.
Installation should follow the applicable ABB System pro E Power assembly instructions, including requirements for mounting, surrounding enclosure components and accessibility. The PPFB4560 alone does not establish a particular ingress protection rating, internal separation classification or electrical safety performance. These characteristics depend on the completed switchgear assembly, correct installation and verification against applicable standards, including relevant IEC 61439 requirements.
Typical Applications
- ABB System pro E Power low-voltage switchgear assemblies.
- Blanking unused openings in compatible electrical distribution cabinets.
- Covering designated switchboard positions without operating apertures.
- Modular enclosure arrangements requiring a 450 mm high panel.
- Distribution cabinet sections requiring a 600 mm nominal panel width.
- Industrial main distribution boards and switchboards.
- Commercial building electrical distribution installations.
- Switchgear assembly projects requiring coordinated enclosure panel layouts.
- OEM switchgear manufacturing and professional electrical panel building.
Technical Specifications
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ002018B0000 |
| Product type | Flat blind panel |
| Manufacturer description | Flat Blind Panel H=450MM W=600MM |
| Nominal height (H) | 450 mm |
| Nominal width (W) | 600 mm |
| Panel configuration | Flat |
| Panel designation | Blind panel |
| Compatible switchgear range | ABB System pro E Power |
| Application | Covering designated openings in compatible low-voltage switchgear enclosures |
| Product category | Switchgear blanking panels and enclosure accessories |
Frequently Asked Questions
What is the ABB PPFB4560 used for?
The ABB PPFB4560 is a flat blind panel intended to cover designated openings in compatible ABB System pro E Power low-voltage switchgear assemblies. It is used where a blanking panel is required instead of a cover with an equipment operating aperture.
What are the dimensions of the ABB PPFB4560?
The PPFB4560 has a specified nominal height of 450 mm and width of 600 mm. These dimensions are identified in the ABB manufacturer description as H=450MM and W=600MM.
What is the difference between the ABB PPFB4560 and PPFB3560?
Both products are flat blind panels within the ABB System pro E Power range and have a nominal width of 600 mm. The PPFB4560, order code 1STQ002018B0000, has a height of 450 mm, whereas the PPFB3560, order code 1STQ002017B0000, has a height of 350 mm. The correct model depends on the required panel opening and cabinet configuration.
Which ABB switchgear range is compatible with the PPFB4560?
The PPFB4560 belongs to the ABB System pro E Power range. Compatibility with a particular enclosure, opening and fixing arrangement should be confirmed against the applicable ABB assembly documentation.
Does the ABB PPFB4560 provide a specific IP protection rating?
The PPFB4560 is an enclosure blind panel, but its individual product description does not specify an independent IP rating. The ingress protection classification of the completed switchgear cabinet depends on the full enclosure design, compatible components, correct installation and verification against applicable IEC 60529 requirements.
Designed for Professional Switchgear and Panel Building
ABB System pro E Power enclosure accessories support the construction of organised modular low-voltage distribution assemblies. The PPFB4560 flat blind panel provides a dedicated covering solution for compatible 450 mm by 600 mm openings, helping professional panel builders maintain consistent enclosure layouts and select the correct manufacturer-specific components.
