Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ002017B0000 ABB PPFB3560 System pro E Power Flat Blind Panel 350 x 600mm
ABB PPFB3560 flat blind panel for compatible System pro E Power low-voltage switchgear enclosures, specified with a nominal height of 350 mm and width of 600 mm for covering designated cabinet openings.
£50.69
Why Choose the ABB PPFB3560 System pro E Power Flat Blind Panel?
The ABB PPFB3560 is a dedicated flat blind panel designed for compatible ABB System pro E Power low-voltage switchgear assemblies. Specified with a nominal height of 350 mm and width of 600 mm, this enclosure accessory provides a solid, unperforated panel arrangement for covering designated openings within modular electrical distribution cabinets.
As part of the established ABB System pro E Power range, the PPFB3560 supports professional switchboard construction by providing a manufacturer-specific solution for closing unused or reserved panel positions. Flat blind panels help create an organised enclosure layout, conceal internal equipment areas and maintain the intended physical separation between the external operating environment and compatible cabinet compartments.
Identified by ABB order code 1STQ002017B0000, the PPFB3560 is intended for electrical panel builders, switchgear manufacturers and installation specialists requiring a correctly dimensioned blanking component. Its 350 mm height, 600 mm width and flat-panel configuration make it suitable for compatible System pro E Power arrangements where a designated opening requires a matching blind panel rather than an equipment-specific cover.
Key Advantages
- ABB System pro E Power compatibility: Designed for the manufacturer's modular low-voltage switchgear platform.
- Flat blind panel design: Provides a dedicated cover for compatible unused or reserved enclosure openings.
- 350 mm nominal height: Matches the specified H=350 dimensional configuration.
- 600 mm nominal width: Intended for compatible cabinet arrangements requiring W=600.
- Organised enclosure appearance: Helps provide a consistent external presentation across switchgear panel sections.
- Physical opening coverage: Supports the intended enclosure construction when correctly installed with compatible components.
- Modular assembly support: Allows designated positions to be covered within suitable System pro E Power configurations.
- Manufacturer-specific selection: Helps maintain consistency when specifying ABB enclosure accessories.
- Professional switchgear construction: Suitable for industrial and commercial electrical distribution projects.
Key Features
- ABB System pro E Power enclosure accessory.
- PPFB3560 manufacturer product designation.
- 1STQ002017B0000 ABB order code.
- Flat blind panel configuration.
- 350 mm nominal height.
- 600 mm nominal width.
- Designed for covering compatible switchgear enclosure openings.
- Suitable for designated positions without equipment operating apertures.
- Supports modular electrical distribution cabinet construction.
- Intended for integration with appropriately selected System pro E Power enclosure components.
- Suitable for professional electrical panel building and switchboard assembly.
Reliable Enclosure Coverage for Modular Switchgear Assemblies
Blind panels are important components in modular low-voltage switchgear construction because they provide dedicated covers for enclosure positions that do not require direct access to electrical equipment. Correctly selected panels help complete the intended cabinet arrangement, maintain a consistent external layout and prevent unnecessary openings from remaining exposed in the finished switchboard.
The ABB PPFB3560 is specified as a flat blind panel measuring 350 mm high by 600 mm wide. This dimensional configuration helps electrical panel builders identify a suitable blanking accessory for compatible System pro E Power installations. Its flat design distinguishes it from specialised covers incorporating equipment cut-outs, operating apertures or other application-specific features.
When incorporating the PPFB3560 into a completed switchboard, installers should follow the applicable ABB System pro E Power assembly instructions. Correct mounting, surrounding enclosure components, accessibility requirements and the intended degree of protection must be considered. The blind panel alone does not establish a particular ingress protection rating, internal separation classification or electrical safety performance; these depend on the complete assembly and its verification against relevant IEC 61439 requirements.
Typical Applications
- ABB System pro E Power low-voltage switchgear assemblies.
- Blanking unused openings in compatible electrical distribution cabinets.
- Covering designated switchboard positions without operating apertures.
- Modular enclosure arrangements requiring a 350 mm high panel.
- Distribution cabinet sections requiring a 600 mm nominal panel width.
- Industrial main distribution boards and switchboards.
- Commercial building electrical distribution installations.
- Switchgear assembly projects requiring coordinated enclosure panel layouts.
- OEM switchgear manufacturing and professional electrical panel building.
Technical Specifications
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ002017B0000 |
| Product type | Flat blind panel |
| Manufacturer description | Flat Blind Panel H=350MM W=600MM |
| Nominal height (H) | 350 mm |
| Nominal width (W) | 600 mm |
| Panel configuration | Flat |
| Panel designation | Blind panel |
| Compatible switchgear range | ABB System pro E Power |
| Application | Covering designated openings in compatible low-voltage switchgear enclosures |
| Product category | Switchgear blanking panels and enclosure accessories |
Frequently Asked Questions
What is the ABB PPFB3560 used for?
The ABB PPFB3560 is a flat blind panel designed to cover designated openings in compatible ABB System pro E Power low-voltage switchgear assemblies. It is intended for enclosure positions requiring a solid blanking panel rather than an equipment-specific cover.
What are the dimensions of the ABB PPFB3560?
The PPFB3560 has a specified nominal height of 350 mm and width of 600 mm. These dimensions are identified in the manufacturer description as H=350MM and W=600MM.
What is a flat blind panel in an electrical switchboard?
A flat blind panel is an enclosure component used to cover a designated opening where no equipment operating aperture is required. It helps complete the external panel arrangement of a compatible switchboard while supporting the intended enclosure construction.
Which ABB switchgear range is compatible with the PPFB3560?
The PPFB3560 belongs to the ABB System pro E Power range. Compatibility with a particular cabinet structure, opening and fixing arrangement should be confirmed against the applicable ABB assembly documentation.
Does the ABB PPFB3560 provide a specific IP protection rating?
The PPFB3560 is an enclosure blind panel, but its individual product description does not specify an independent IP rating. The ingress protection classification of the completed switchgear cabinet depends on the full enclosure design, compatible components, correct installation and verification against applicable IEC 60529 requirements.
Designed for Professional Switchgear and Panel Building
ABB System pro E Power enclosure accessories support the construction of organised modular low-voltage distribution assemblies. The PPFB3560 flat blind panel provides a dedicated covering solution for compatible 350 mm by 600 mm openings, helping professional panel builders maintain consistent enclosure layouts and manufacturer-specific component selection.
