Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PTBS8090 is a blind side vertical segregation component measuring 800 mm high and 900 mm deep, designated NO IN.UP. for compatible System pro E Power low-voltage switchboard assemblies.
£120.15
The ABB PTBS8090 is a blind side vertical segregation component within the ABB System pro E Power range of low-voltage electrical switchboard equipment. Designed for compatible internal segregation arrangements, this component has a nominal height of 800 mm and depth of 900 mm, providing a specifically dimensioned accessory for designated side separation applications.
Internal segregation is an important aspect of professional switchboard design, helping establish physical separation between designated areas of an electrical assembly. The PTBS8090 is identified as a blind side vertical segregation accessory, distinguishing it from other side segregation components within the System pro E Power range. Its manufacturer designation also includes NO IN.UP., indicating a specific configuration variant that should be matched to the intended switchboard arrangement.
Identified by ABB manufacturer order code 1STQ002004B0000, the PTBS8090 provides a dedicated product reference for switchboard manufacturers, electrical contractors and system integrators. Its 800 mm nominal height and 900 mm nominal depth support accurate dimensional selection, while the precise installation requirements, meaning of the NO IN.UP. designation and compatibility with adjacent components should be confirmed against the relevant ABB technical documentation.
Specification note: The supplied ABB product designation confirms the segregation type, nominal height, nominal depth and NO IN.UP. configuration reference. It does not establish the component material, thickness, mounting hardware, detailed compatibility or achieved form of internal separation. These characteristics must be verified against the applicable ABB product drawings and installation documentation.
Internal segregation components help switchboard manufacturers establish defined mechanical boundaries within low-voltage electrical distribution assemblies. Depending on the design, appropriately selected barriers and partitions may separate busbars, functional units, connection areas and other designated compartments. Blind side vertical segregation components are relevant where a compatible switchboard configuration specifies a side separation element with a blind design.
The ABB PTBS8090 is identified for a nominal 800 mm high × 900 mm deep arrangement within the System pro E Power range. It is a mechanical segregation accessory rather than an electrical switching or protective device. Installing the PTBS8090 alone does not establish a particular IEC/EN 61439 form of internal separation, electrical clearance, ingress protection rating or personnel protection level. These characteristics depend on the complete assembly design, correct component selection and installation of all required structural and electrical equipment.
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ002004B0000 |
| Product type | Blind side vertical segregation component |
| Product category | Low-voltage switchboard internal segregation accessories |
| Nominal height | 800 mm |
| Nominal depth | 900 mm |
| Segregation position | Side |
| Segregation orientation | Vertical |
| Design designation | Blind |
| Configuration designation | NO IN.UP. |
| Associated switchboard system | ABB System pro E Power |
| Application | Compatible internal switchboard separation arrangements |
| Manufacturer product designation | BLIND SIDE V.SEG.H=800MM D=900 NO IN.UP. |
The ABB PTBS8090 is a blind side vertical segregation component intended for compatible internal separation arrangements within ABB System pro E Power low-voltage electrical switchboard assemblies.
The PTBS8090 has a nominal height of 800 mm and a nominal depth of 900 mm, as specified in the ABB manufacturer product designation.
Blind side vertical segregation identifies the PTBS8090 as a side-mounted vertical separation component with a blind design designation. Its exact construction and installation arrangement should be confirmed using the relevant ABB technical drawings.
NO IN.UP. is a configuration reference included in the ABB product designation. The precise meaning of this abbreviation is not established by the supplied description alone and should be verified against ABB installation documentation. The PTBS8090 should not be assumed interchangeable with an IN.UP. variant.
No. The PTBS8090 is an individual mechanical segregation component, and the completed switchboard's form of internal separation depends on the entire assembly design and the correct installation of all required components. A particular IEC/EN 61439 separation form cannot be established from this product designation alone.
ABB System pro E Power accessories support the construction of organised, professionally engineered low-voltage electrical distribution assemblies. The PTBS8090 blind side vertical segregation component provides a dedicated solution for compatible 800 mm high and 900 mm deep internal separation arrangements, helping panel builders and system integrators identify the correct ABB component for their specified switchboard configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.