Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS1580 is a rear vertical segregation component measuring 150 mm high and 800 mm wide, designated NO IN.UP. for compatible System pro E Power low-voltage electrical switchboard assemblies.
£65.08
The ABB PRVS1580 is a rear vertical segregation component designed for compatible ABB System pro E Power low-voltage electrical switchboard assemblies. Specified with a nominal height of 150 mm and width of 800 mm, this accessory provides a dedicated mechanical component for designated internal separation arrangements. Its manufacturer designation includes NO IN.UP., distinguishing it from other rear segregation configurations within the product range.
Internal segregation components are important elements in professional electrical switchboard construction, helping establish defined physical separation between designated sections of an assembly. The PRVS1580 is specifically identified for rear vertical segregation, making it relevant to System pro E Power configurations where the rear compartment arrangement, component dimensions and mechanical compatibility must correspond to the intended switchboard design.
Identified by ABB manufacturer order code 1STQ002003B0000, the PRVS1580 belongs to the ABB System pro E Power product group. Its 150 mm nominal height and 800 mm nominal width provide a defined specification for compatible switchboard assemblies. The exact installation implications of the NO IN.UP. designation, required fixings and compatibility with adjacent segregation components should be verified against the relevant ABB technical documentation.
Specification note: The supplied ABB designation does not establish the component's material, thickness, fixing method or compatibility with a particular form of internal separation. The exact meaning of NO IN.UP. should also be confirmed from ABB assembly documentation rather than inferred from the abbreviation.
Internal segregation accessories contribute to the mechanical organisation of low-voltage electrical switchboards by establishing defined separation arrangements within an assembly. Depending on the overall switchboard design, barriers and partitions may be used to separate busbars, functional units, terminals and other designated areas. Rear vertical segregation components form part of these arrangements where the installation requires physical separation within the rear section of a compatible switchboard configuration.
The ABB PRVS1580 provides a rear vertical segregation component with nominal dimensions of 150 mm × 800 mm for compatible System pro E Power assemblies. Its function is mechanical rather than electrical, and installing the component alone does not establish a particular IEC/EN 61439 form of internal separation, electrical clearance, ingress protection rating or personnel protection level. These characteristics depend on the complete switchboard design and correct installation of all required barriers, structural components and electrical equipment.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ002003B0000 |
| Product type | Rear vertical segregation component |
| Product category | Electrical switchboard internal segregation accessories |
| Nominal height | 150 mm |
| Nominal width | 800 mm |
| Segregation arrangement | Rear vertical |
| Configuration designation | NO IN.UP. |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical component for compatible internal segregation arrangements |
| Application | Low-voltage electrical switchboard construction |
| Product designation | REAR VERT.SEGR.H=150MM W=800MM NO IN.UP. |
| Product group | System pro E Power |
The ABB PRVS1580 is a rear vertical segregation component intended for compatible internal separation arrangements within ABB System pro E Power low-voltage electrical switchboards.
The PRVS1580 has a nominal height of 150 mm and a nominal width of 800 mm, as specified in its ABB product designation.
The PRVS1580 belongs to the ABB System pro E Power range. Compatibility with individual switchboard configurations, segregation arrangements and supporting components should be verified against the relevant ABB technical documentation.
NO IN.UP. is a configuration reference included in the ABB product designation. Its precise installation meaning is not established by the abbreviated description alone and should be confirmed using the manufacturer's assembly drawings or installation instructions. The PRVS1580 should not be treated as interchangeable with an IN.UP. version without verification.
No specific form of internal separation is established by the product designation alone. The PRVS1580 is an individual rear vertical segregation component, and the achieved segregation arrangement depends on the complete switchboard design and correct installation of all required components.
ABB System pro E Power components support professional, organised and adaptable low-voltage electrical distribution assemblies. The PRVS1580 rear vertical segregation accessory provides a dedicated mechanical component for compatible 150 mm high and 800 mm wide internal separation arrangements, helping switchboard manufacturers, electrical contractors and system integrators develop coordinated electrical distribution installations using correctly selected ABB components.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.