Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PRVS1006 rear vertical segregation component for compatible System pro E Power low-voltage switchgear assemblies, specified with a nominal height of 100 mm, width of 600 mm and NO IN.UP. configuration.
£53.27
The ABB PRVS1006 is a dedicated rear vertical segregation component designed for compatible ABB System pro E Power low-voltage switchgear assemblies. Specified with a nominal height of 100 mm and width of 600 mm, this accessory supports the construction of defined internal separation arrangements within modular electrical distribution cabinets and switchboard structures.
As part of the established ABB System pro E Power range, the PRVS1006 provides a manufacturer-specific solution for rear vertical segregation in compatible switchgear configurations. Its designation includes NO IN.UP., identifying a particular configuration variant that must be considered when selecting separation accessories for the intended cabinet arrangement.
Identified by ABB order code 1STQ001999B0000, the PRVS1006 is intended for professional electrical panel builders, switchgear manufacturers and installation specialists. Its 100 mm height, 600 mm width and specific rear segregation designation enable accurate component identification for industrial and commercial low-voltage distribution projects.
Internal segregation components form part of the mechanical separation arrangements used in low-voltage switchgear construction. Depending on the switchboard design, these components help establish boundaries between designated internal areas, supporting organised equipment positioning and consistent assembly of modular electrical distribution cabinets.
The ABB PRVS1006 is specifically designated for rear vertical segregation with nominal dimensions of 100 mm high by 600 mm wide. Its NO IN.UP. configuration distinguishes it from other System pro E Power segregation accessories. Selecting the correct version is important because components with different dimensional or configuration designations should not be treated as interchangeable without confirmation from ABB's assembly documentation.
Installation should follow the applicable ABB System pro E Power instructions, including requirements for component positioning, fixing arrangements and compatibility with surrounding enclosure structures. The PRVS1006 alone does not establish a particular form of internal separation, ingress protection rating or electrical performance classification. These characteristics depend on the complete switchgear design and verification against relevant IEC 61439 requirements.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ001999B0000 |
| Product type | Rear vertical segregation component |
| Manufacturer description | Rear Vert. Segr. H=100MM W=600MM NO IN.UP. |
| Nominal height (H) | 100 mm |
| Nominal width (W) | 600 mm |
| Segregation orientation | Rear vertical |
| Manufacturer configuration | NO IN.UP. |
| Compatible switchgear range | ABB System pro E Power |
| Application | Internal segregation within compatible low-voltage switchgear assemblies |
| Product category | Switchgear segregation and separation accessories |
The ABB PRVS1006 is a rear vertical segregation component designed for compatible ABB System pro E Power low-voltage switchgear assemblies. It supports internal separation arrangements requiring the manufacturer's specified dimensions and NO IN.UP. configuration.
The PRVS1006 has a specified nominal height of 100 mm and width of 600 mm. These dimensions are identified in the ABB manufacturer description as H=100MM and W=600MM.
NO IN.UP. is the manufacturer configuration designation associated with the PRVS1006. It identifies a specific version of the rear vertical segregation component. The precise installation requirements represented by this designation should be confirmed using the applicable ABB System pro E Power technical documentation.
Both products are rear vertical segregation components within the ABB System pro E Power range and carry the NO IN.UP. designation. The PRVS1006 measures 100 mm high by 600 mm wide, whereas the PRVS0580 measures 50 mm high by 800 mm wide. The correct component depends on the dimensions and configuration of the intended switchgear assembly.
The PRVS1006 is a component intended for compatible internal segregation arrangements, but the component alone does not establish a complete form of separation under IEC 61439. The final separation classification depends on the overall switchgear design, associated components and verified assembly configuration.
ABB System pro E Power segregation accessories support the construction of organised modular low-voltage distribution assemblies. The PRVS1006 provides a dedicated rear vertical segregation component for compatible 100 mm by 600 mm configurations, helping professional panel builders maintain consistent internal layouts and select the correct manufacturer-specific accessory variant.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.