Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ001968B0000 ABB PRVS0541 System Pro E Power Rear Vertical Segregation 50 x 400 mm
ABB PRVS0541 (1STQ001968B0000) is a 50 mm high and 400 mm wide rear vertical segregation accessory designed for upper internal compartment separation in compatible ABB System Pro E Power low-voltage switchboard assemblies.
£29.15
Why Choose the ABB PRVS0541 System Pro E Power Rear Vertical Segregation Panel?
The ABB PRVS0541 (1STQ001968B0000) is a rear vertical segregation accessory designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. With a specified height of 50 mm and width of 400 mm, this component is intended for internal upper segregation arrangements within the appropriate modular electrical distribution enclosure.
As part of the ABB System Pro E Power product range, the PRVS0541 supports the physical separation and organisation of internal switchboard compartments. Segregation accessories are important components in electrical panel construction, helping panel builders establish defined barriers between designated areas of an assembly according to the applicable switchboard design and installation requirements.
Featuring a 50 mm height, 400 mm width and a designated rear vertical segregation configuration, the ABB PRVS0541 is intended for the upper internal section of compatible System Pro E Power assemblies. Its dedicated design supports consistent integration into the specified enclosure arrangement, making it suitable for professional switchboard construction, modifications and compatible replacement applications.
Key Advantages
- Purpose-designed rear vertical segregation accessory for ABB System Pro E Power switchboards.
- 50 mm specified height for the intended segregation arrangement.
- 400 mm specified width for compatible internal enclosure configurations.
- Designed for upper internal segregation applications.
- Supports physical separation between designated areas of low-voltage switchboard assemblies.
- Manufacturer-specific design for integration with compatible ABB enclosure components.
- Supports organised construction of modular electrical distribution panels.
- Suitable for professional electrical panel builders, switchboard manufacturers and maintenance engineers.
Key Features
- ABB System Pro E Power product family.
- PRVS0541 rear vertical segregation designation.
- ABB order code 1STQ001968B0000.
- 50 mm specified component height.
- 400 mm specified component width.
- Rear vertical segregation configuration.
- Designed for an internal upper mounting position.
- Mechanical segregation accessory for compatible low-voltage switchboard assemblies.
- Supports modular compartment separation within the specified enclosure arrangement.
Reliable Internal Segregation for Low-Voltage Switchboards
The ABB System Pro E Power range provides a modular platform for constructing professional low-voltage electrical switchboards and power distribution assemblies. Its system of compatible enclosure components and internal accessories enables panel builders to develop structured electrical installations for industrial, commercial and infrastructure applications.
The ABB PRVS0541 rear vertical segregation accessory is designed for an upper internal segregation arrangement within a compatible switchboard configuration. Its specified dimensions of 50 mm × 400 mm identify the component required for the intended mounting position and enclosure layout.
Internal segregation components help establish physical separation between designated switchboard areas. Depending on the complete assembly design, segregation arrangements may be used to separate functional units, busbar compartments or cable termination areas. The required separation arrangement must be achieved using the correct combination of compatible components and the manufacturer's assembly instructions.
The PRVS0541 is a mechanical segregation accessory rather than an electrical switching or protective device. Its installation alone does not establish a particular form of internal separation, ingress protection rating or electrical safety classification. These characteristics depend on the complete verified switchboard assembly and its compliance with the applicable requirements, including the relevant parts of the IEC/EN 61439 series.
Typical Applications
- ABB System Pro E Power low-voltage switchboard assemblies.
- Rear vertical segregation arrangements in compatible electrical distribution cabinets.
- Upper internal compartment separation within modular switchboards.
- Industrial power distribution panels.
- Commercial building electrical distribution systems.
- Electrical switchboard manufacturing and panel building.
- Modular enclosure compartment configuration and assembly.
- Maintenance, modification and replacement of compatible internal segregation components.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PRVS0541 |
| ABB order code | 1STQ001968B0000 |
| Product type | Rear vertical segregation accessory |
| Accessory category | Internal switchboard segregation components |
| Specified height | 50 mm |
| Specified width | 400 mm |
| Segregation orientation | Vertical |
| Segregation position | Rear |
| Installation location | Internal upper section |
| Enclosure system | ABB System Pro E Power |
| Installation type | Internal mechanical assembly within compatible switchboards |
| Application | Low-voltage electrical distribution enclosure segregation |
| Compatibility | System Pro E Power configurations specified for the PRVS0541 accessory |
Frequently Asked Questions
What is the ABB PRVS0541 1STQ001968B0000 used for?
The ABB PRVS0541 is a rear vertical segregation accessory designed for the upper internal section of compatible ABB System Pro E Power low-voltage switchboard assemblies. It supports the physical separation of designated areas within the intended enclosure configuration.
What are the dimensions of the ABB PRVS0541?
The PRVS0541 is specified with a height of 50 mm and a width of 400 mm. These dimensions identify the intended segregation component within the ABB System Pro E Power range.
Where is the ABB PRVS0541 installed?
The PRVS0541 is designated for a rear vertical segregation arrangement in the upper internal section of a compatible System Pro E Power switchboard. The exact installation position and fixing arrangement depend on the specified enclosure assembly.
Which ABB product range is compatible with the PRVS0541?
The PRVS0541 belongs to the ABB System Pro E Power product group and is intended for compatible low-voltage switchboard configurations requiring this rear vertical segregation accessory.
Does the ABB PRVS0541 provide electrical protection on its own?
No. The ABB PRVS0541 is an internal mechanical segregation accessory, not a standalone electrical protection device. Its contribution to internal separation depends on the complete switchboard design, associated components and correct installation in accordance with ABB assembly requirements.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchboard construction. The PRVS0541 rear vertical segregation accessory, ABB order code 1STQ001968B0000, supports the assembly of compatible upper internal segregation arrangements with specified dimensions of 50 mm × 400 mm for industrial and commercial electrical distribution systems.
