Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PKST0301 (1STQ001935B0000) System Pro E Power IP31/IP41 roof kit with an N.2 quantity designation for compatible single-column modular low-voltage switchboard enclosures with a nominal depth of 300 mm.
£39.03
The ABB PKST0301 (1STQ001935B0000) is a purpose-designed IP31/IP41 roof kit for single-column switchboard configurations within the ABB System Pro E Power modular low-voltage switchboard range. Identified by the manufacturer as N.2 ROOF KIT IP31/41 COL.SIN.P=300MM, this product is specified as a two-piece roof kit arrangement for a compatible single-column enclosure with a nominal depth of 300 mm.
As part of the ABB System Pro E Power series, the PKST0301 supports professional electrical distribution switchboard construction by providing manufacturer-designated roof components for compatible single-column enclosure arrangements. Its specification identifies IP31 and IP41 enclosure protection configurations, making it relevant to installations where the completed switchboard is designed to meet one of these ingress protection classifications.
The ABB PKST0301 roof kit is intended for use with corresponding System Pro E Power enclosure structures requiring a roof arrangement for a 300 mm nominal column depth. Correct roof component selection is important in modular switchboard construction because the upper enclosure structure must correspond to the selected column dimensions and the intended protection arrangement.
The manufacturer designation includes N.2, indicating a quantity of two in the roof kit specification. The precise composition of the kit, individual component dimensions, fixing arrangements and any supplementary accessories required for installation should be verified against the relevant ABB technical documentation.
The roof structure is an important part of a low-voltage electrical distribution switchboard enclosure. Alongside doors, side panels, rear panels and other enclosure components, it contributes to the mechanical construction and intended environmental protection of the completed assembly. Selecting the correct roof accessory helps ensure that the upper enclosure arrangement corresponds to the switchboard's specified dimensions.
The ABB PKST0301 is specifically identified as a roof kit for a single-column configuration with a nominal depth of 300 mm. The manufacturer's P=300MM designation refers to the intended column depth configuration rather than establishing the physical dimensions of each individual roof component.
The specification also includes N.2, indicating two items in the manufacturer's roof kit designation. This is useful when identifying the correct product for procurement, but it does not independently confirm the exact shape, size or installation role of each item. Those details should be checked against the applicable ABB assembly documentation.
Within the ABB System Pro E Power modular platform, roof accessories must be selected according to the enclosure's column arrangement and dimensional configuration. The PKST0301 is intended for the specified single-column, 300 mm depth arrangement, distinguishing it from roof kits designated for side-by-side columns or other enclosure depths.
The manufacturer's IP31/IP41 designation identifies the ingress protection configurations associated with this roof kit. Under IEC 60529, the first digit 3 indicates protection against access with a tool and against solid foreign objects of 2.5 mm diameter and greater.
The second digit describes protection against water. IP31 provides protection against vertically falling water drops, while IP41 provides protection against vertically falling water drops when the enclosure is tilted up to 15°. The first digit 4 in IP41 additionally indicates protection against access with a wire and against solid foreign objects of 1 mm diameter and greater.
These classifications apply to the appropriately assembled and verified enclosure. The ABB PKST0301 roof kit does not independently provide or guarantee IP31 or IP41 protection. The final ingress protection rating depends on the complete enclosure design, including the correct installation of roof components, doors, panels, joints, cable entries and any required supplementary accessories.
For electrical panel builders and system integrators, the PKST0301 provides a manufacturer-designated accessory for compatible modular switchboard projects. Its specification supports accurate product identification during enclosure planning, component selection and installation.
Before installation, engineers should verify the selected enclosure dimensions, single-column configuration, roof component arrangement, fixing requirements and intended ingress protection classification against the relevant ABB technical documentation. The PKST0301 is a mechanical enclosure accessory and does not independently determine the completed switchboard's electrical ratings, short-circuit withstand performance or compliance with applicable low-voltage switchboard standards.
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001935B0000 |
| Product type | Roof kit |
| Manufacturer designation | N.2 ROOF KIT IP31/41 COL.SIN.P=300MM |
| Ingress protection configuration | IP31 / IP41 |
| Column arrangement | Single column |
| Nominal column depth | 300 mm |
| Quantity stated in manufacturer designation | 2 |
| Installation area | Roof / upper enclosure structure |
| Product group | System Pro E Power |
| Application | Roof integration for compatible single-column switchboard enclosures |
| System compatibility | ABB System Pro E Power modular switchboard assemblies |
The ABB PKST0301 is an IP31/IP41 roof kit intended for compatible single-column ABB System Pro E Power switchboard enclosures with a nominal 300 mm column depth. It provides manufacturer-designated components for the upper enclosure arrangement.
The P=300MM designation identifies a nominal 300 mm column depth associated with the intended enclosure configuration. It does not necessarily represent the physical depth of an individual roof kit component.
The manufacturer designation begins with N.2, indicating a quantity of two in the roof kit specification. The exact contents and installation arrangement should be confirmed against the relevant ABB technical documentation.
The PKST0301 is designated for compatible IP31/IP41 enclosure configurations, but the roof kit alone does not establish either rating. The completed switchboard must incorporate the correct enclosure components and be assembled and verified to achieve its intended ingress protection classification.
The ABB manufacturer order code is 1STQ001935B0000, and the product reference is PKST0301. This single-column IP31/IP41 roof kit belongs to the ABB System Pro E Power product group.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The PKST0301 IP31/IP41 roof kit supports compatible single-column enclosure configurations with a nominal depth of 300 mm, helping electrical contractors, switchboard manufacturers and system integrators select manufacturer-designated roof accessories for structured and professionally engineered electrical distribution infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.