Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PKDT0500 (1STQ001921B0000) System Pro E Power IP31/IP41 roof kit with a nominal length of 500 mm for compatible side-by-side column arrangements in modular low-voltage electrical distribution switchboards.
£35.17
The ABB PKDT0500 (1STQ001921B0000) is a purpose-designed IP31/IP41 roof kit for side-by-side switchboard columns within the ABB System Pro E Power modular low-voltage switchboard range. Identified by the manufacturer as ROOF KIT IP31/41 SIDE BY SIDE COL. L=500, this accessory is specified for compatible adjacent enclosure column arrangements with a nominal length of 500 mm.
As part of the ABB System Pro E Power series, the PKDT0500 supports professional electrical distribution switchboard construction by providing a dedicated roof accessory for installations incorporating side-by-side columns. Its manufacturer designation identifies suitability for corresponding IP31 and IP41 enclosure configurations, making it relevant to modular switchboards designed around these ingress protection requirements.
The ABB PKDT0500 roof kit is intended for use where neighbouring System Pro E Power enclosure columns require the specified upper enclosure arrangement. In multi-column switchboard construction, the correct selection of roof components helps complete the enclosure structure and supports coordinated assembly between adjacent sections.
With its specified 500 mm nominal length, the PKDT0500 provides an application-specific solution for compatible ABB switchboard configurations. This dimensional designation distinguishes it from other roof kits in the System Pro E Power range, helping panel builders select the appropriate accessory for the intended column arrangement.
Modular low-voltage electrical distribution switchboards often incorporate multiple enclosure columns arranged alongside one another. These configurations allow electrical equipment to be organised across adjacent sections while maintaining the intended mechanical structure and functional layout of the complete assembly. Correctly selected roof components form part of this coordinated enclosure construction.
The ABB PKDT0500 is specifically identified as a roof kit for side-by-side columns within the ABB System Pro E Power range. Its 500 mm nominal length distinguishes it from roof kits intended for other dimensional configurations, helping ensure that the selected component corresponds to the required switchboard arrangement.
The manufacturer designation includes IP31/IP41, indicating that the roof kit is associated with compatible enclosure systems designed for these ingress protection classifications. Under IEC 60529, both classifications provide protection against access with a tool and against solid foreign objects of 2.5 mm diameter and greater.
The difference between these classifications concerns the specified water protection conditions. IP31 provides protection against vertically falling water drops, while IP41 provides protection against vertically falling water drops when the enclosure is tilted up to 15°. These classifications apply to the appropriately constructed and verified enclosure rather than to a roof kit considered in isolation.
The ABB PKDT0500 roof kit should therefore be selected as part of the complete System Pro E Power enclosure design. The finished switchboard's ingress protection depends on the correct installation of all relevant enclosure components, including roof elements, doors, side panels, joints, cable entry arrangements and any required supplementary accessories.
In side-by-side column installations, the mechanical relationship between neighbouring enclosure sections is particularly important. The PKDT0500 provides a manufacturer-designated roof component for the specified 500 mm configuration, supporting the selection of compatible parts during switchboard planning, procurement and assembly.
Before installation, engineers should verify the exact enclosure dimensions, column arrangement, required roof accessories, fastening methods and intended IP31 or IP41 configuration against the relevant ABB technical documentation. The manufacturer's short designation does not establish the kit contents, fixing details or compatibility with every System Pro E Power enclosure variant.
The PKDT0500 is a mechanical enclosure accessory and does not independently determine the completed assembly's electrical ratings, short-circuit withstand performance, thermal characteristics or compliance with applicable low-voltage switchboard standards.
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001921B0000 |
| Product type | Roof kit |
| Manufacturer designation | ROOF KIT IP31/41 SIDE BY SIDE COL. L=500 |
| Ingress protection configuration | IP31 / IP41 |
| Column arrangement | Side by side |
| Nominal length | 500 mm |
| Installation area | Roof / upper enclosure structure |
| Product group | System Pro E Power |
| Application | Roof integration for compatible adjacent switchboard columns |
| System compatibility | ABB System Pro E Power modular switchboard assemblies |
The ABB PKDT0500 is a roof kit for compatible side-by-side switchboard column arrangements within the ABB System Pro E Power range. It is specified for corresponding IP31/IP41 enclosure configurations and has a nominal length of 500 mm.
The ABB PKDT0500 has a manufacturer-specified nominal length of 500 mm. This dimension identifies the intended roof kit configuration and should not be interpreted as the overall dimensions of the completed switchboard assembly.
The IP31/IP41 designation identifies compatible enclosure protection configurations. Under IEC 60529, both classifications address access and solid-object protection, while IP31 provides protection against vertically falling water drops and IP41 also covers vertically falling drops when the enclosure is tilted up to 15°. The completed switchboard must be correctly assembled and verified to achieve its intended ingress protection rating.
Yes. The manufacturer's designation specifically identifies the PKDT0500 as a roof kit for side-by-side columns. Its suitability depends on the selected ABB System Pro E Power enclosure dimensions, column arrangement and associated roof components.
The ABB manufacturer order code is 1STQ001921B0000, and the product reference is PKDT0500. This IP31/IP41 roof kit belongs to the ABB System Pro E Power product group.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The PKDT0500 IP31/IP41 roof kit supports compatible side-by-side switchboard column arrangements with a specified nominal length of 500 mm, helping electrical contractors, switchboard manufacturers and system integrators select purpose-designed enclosure components for structured electrical distribution infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.