Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PKST0700 (1STQ001911B0000) is a 700 mm left-column roof kit designed for IP31/IP41 enclosure configurations within the ABB System Pro E Power low-voltage switchboard range.
£67.81
The ABB PKST0700 (1STQ001911B0000) is a purpose-designed IP31/IP41 roof kit for the left column of an electrical enclosure, developed for use with the ABB System Pro E Power low-voltage switchboard system. Designed for a nominal enclosure width of 700 mm, this roof kit forms part of ABB's modular enclosure accessory range, supporting the construction and configuration of professional electrical distribution assemblies.
As part of the ABB System Pro E Power series, the PKST0700 is intended to provide a compatible roof assembly for the specified left-hand column configuration. It supports the integration of enclosure components within a modular switchboard structure, helping installers and panel builders achieve consistent mechanical assembly and the required enclosure protection when used with the appropriate ABB components.
With its 700 mm nominal width and designated IP31/IP41 enclosure application, the ABB PKST0700 is suitable for low-voltage electrical distribution panels, industrial switchboards and commercial electrical installations. Its dedicated left-column configuration makes it an important component when assembling or extending compatible System Pro E Power switchboard systems.
The ABB System Pro E Power platform is a modular low-voltage switchboard system designed to accommodate a wide range of electrical distribution requirements. Its enclosure accessories allow panel builders to configure assemblies for different installation layouts, protection requirements and electrical distribution applications.
The ABB PKST0700 roof kit is intended for the left-hand column of a compatible 700 mm-wide enclosure configuration. It forms part of the upper enclosure assembly and contributes to the physical enclosure arrangement required for the specified IP31/IP41 application.
The IP31 and IP41 classifications describe degrees of protection against access to hazardous parts, ingress of solid objects and vertically falling water drops under the relevant test conditions. The required protection rating applies to the correctly assembled enclosure system rather than to the roof kit independently. Correct selection, installation and compatibility with the remaining enclosure components are therefore essential.
Using the specified ABB roof accessory helps maintain consistency with the System Pro E Power enclosure design, supporting professional switchboard construction, refurbishment and expansion.
| Product group | System Pro E Power |
|---|---|
| Product designation | PKST0700 |
| ABB order code | 1STQ001911B0000 |
| Product type | Electrical enclosure roof kit |
| Accessory category | Switchboard roof / top enclosure accessory |
| Nominal enclosure width | 700 mm |
| Column position | Left-hand column |
| Intended enclosure protection | IP31 / IP41 |
| Enclosure system | ABB System Pro E Power |
| Application | Low-voltage electrical distribution switchboards |
| Installation location | Upper section of compatible enclosure assembly |
| Compatibility | System Pro E Power configurations specified for the PKST0700 roof kit |
The ABB PKST0700 is a roof kit designed for the left-hand column of compatible ABB System Pro E Power low-voltage switchboard enclosures. It forms part of the enclosure's upper assembly.
The roof kit is specified for a 700 mm nominal enclosure width within the appropriate ABB System Pro E Power configuration.
The ABB PKST0700 is designated for IP31/IP41 enclosure applications. The achieved protection rating depends on the complete enclosure configuration and correct installation of all required components.
The PKST0700 is specifically designated for the left-hand column. A different roof kit may be required for right-hand or other column configurations, depending on the System Pro E Power assembly.
The roof kit belongs to the ABB System Pro E Power product group and is intended for compatible low-voltage switchboard enclosure configurations within that system.
ABB System Pro E Power enclosure systems provide a modular platform for professional low-voltage electrical distribution assemblies. The PKST0700 roof kit, ABB order code 1STQ001911B0000, supports the construction of compatible 700 mm left-column enclosure configurations designed for IP31/IP41 applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.