Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PKST0600 (1STQ001910B0000) System Pro E Power roof kit accessory designated for compatible IP31/IP41 left-column switchboard enclosure arrangements with a nominal length of 600 mm.
£66.62
The ABB PKST0600 (1STQ001910B0000) is a roof kit accessory designed for the ABB System Pro E Power low-voltage switchboard system. Identified by ABB as N.2 ROOF KIT IP31/41 LEFT COL.L=600MM, this product is intended for compatible switchboard roof arrangements associated with IP31 and IP41 enclosure configurations.
The PKST0600 is specifically designated for a left-column installation with a nominal 600 mm length. The manufacturer's N.2 reference forms part of the roof kit configuration description and should be checked against ABB's assembly documentation to establish the exact installation arrangement and supplied contents.
As part of ABB's coordinated System Pro E Power accessory range, the PKST0600 helps electrical panel builders select the appropriate roof components for a specified switchboard layout. It is a roof assembly accessory, not a complete switchboard enclosure or a standalone IP-rated protective cover.
The roof is an important part of a low-voltage switchboard enclosure. Alongside side panels, doors, bottom components and other enclosure accessories, it contributes to the physical construction of the assembly and the protection of internal electrical equipment against specified environmental conditions.
The ABB PKST0600 is designated for IP31/IP41 roof configurations. Under the IP classification system defined by BS EN 60529, the first digit describes protection against access to hazardous parts and ingress of solid foreign objects, while the second digit describes protection against water ingress.
For an IP31 enclosure, the first digit indicates protection against access with a tool and against solid foreign objects of 2.5 mm or greater, while the second digit indicates protection against vertically falling water drops. An IP41 enclosure has a higher first-digit classification, indicating protection against access with a wire and against solid foreign objects of 1 mm or greater, with the same second-digit water protection classification.
The PKST0600's manufacturer description identifies the roof kit as suitable for the specified IP31/IP41 arrangements. However, installing the accessory does not independently guarantee either IP rating. The final enclosure classification depends on the complete assembly, including all relevant panels, joints, openings and other protective components.
The designation LEFT COL. identifies the intended left-column position. This matters where roof arrangements differ between left-hand, intermediate and right-hand sections of a modular switchboard lineup. The correct roof components must be selected for the overall enclosure configuration.
The specified L=600MM identifies a nominal 600 mm length associated with the roof kit. It should not automatically be interpreted as the overall enclosure width, depth or the dimensions of every individual component supplied within the kit.
The N.2 designation is retained from ABB's manufacturer description. Its precise meaning, the number of supplied components and any associated fixing requirements should be confirmed against the official product documentation rather than inferred from the abbreviation.
When used in a low-voltage assembly designed to BS EN IEC 61439-1 and BS EN IEC 61439-2, the PKST0600 must be installed as part of a properly designed and verified enclosure system. Compatibility, roof assembly details and the intended IP classification should be checked before installation.
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001910B0000 |
| Manufacturer description | N.2 ROOF KIT IP31/41 LEFT COL.L=600MM |
| Product type | Roof kit accessory |
| Product category | Low-voltage switchboard roof and enclosure accessories |
| Designated IP configurations | IP31 / IP41 |
| Installation position | Left column |
| Nominal length | 600 mm |
| Manufacturer configuration reference | N.2 |
| System compatibility | ABB System Pro E Power, subject to the specified enclosure arrangement |
| Installation application | Roof assembly for a compatible left-column switchboard configuration |
| Enclosure location | Roof / top assembly |
| Material and finish | Refer to ABB product documentation |
| Exact kit contents | Refer to ABB product and installation documentation |
| Mounting hardware | Confirm against ABB installation instructions |
| Achieved ingress protection | Dependent on the completed enclosure assembly |
| Electrical ratings | Determined by the installed equipment and verified switchboard design |
The ABB PKST0600 is a roof kit accessory for compatible ABB System Pro E Power low-voltage switchboards. It is designated for IP31/IP41 enclosure configurations and a left-column installation position.
ABB specifies a nominal length of 600 mm in the product description. The complete component dimensions and exact installation arrangement should be confirmed using ABB's technical drawings.
The manufacturer identifies the PKST0600 for IP31/IP41 roof configurations. The achieved IP classification depends on the complete switchboard enclosure and correct installation of all required components.
The PKST0600 is specifically designated for a left-column arrangement. It should not be assumed suitable for a right-hand or intermediate column unless that installation is explicitly supported by ABB's technical documentation.
Not necessarily. N.2 is part of ABB's manufacturer configuration reference, but the supplied description does not establish the exact kit contents. The number and type of supplied components should be confirmed against ABB's official product and installation documentation.
ABB System Pro E Power provides coordinated enclosure, roof and structural accessories for professional electrical panel builders and low-voltage distribution specialists. The ABB PKST0600 (1STQ001910B0000) is a dedicated left-column roof kit accessory for compatible IP31/IP41 switchboard configurations, specified with a 600 mm nominal length to support the appropriate ABB enclosure roof arrangement.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.