Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PWRP1880 (1STQ001901B0000) System Pro E Power full-height mounting plate with a nominal height of 1800 mm and length of 800 mm for mounting suitable electrical equipment within compatible modular low-voltage switchboard assemblies.
£463.32
The ABB PWRP1880 (1STQ001901B0000) is a purpose-designed full-height mounting plate for compatible low-voltage electrical distribution switchboards within the ABB System Pro E Power modular switchboard range. Identified by the manufacturer as FULL H.MOUNTING PLATE H=1800MM L=800MM, this product features a nominal height of 1800 mm and length of 800 mm, providing a dedicated equipment mounting component for corresponding switchboard configurations.
As part of the ABB System Pro E Power series, the PWRP1880 supports professional electrical panel construction by providing an extended mounting surface within compatible modular enclosures. Full-height mounting plates are used to support the mechanical installation and positioning of suitable electrical equipment, helping panel builders develop organised internal layouts that meet the requirements of the complete electrical distribution assembly.
The ABB PWRP1880 full-height mounting plate is particularly relevant to industrial and commercial switchboard projects where a larger mounting configuration is required. Its specified 1800 mm × 800 mm dimensions distinguish it from shorter or narrower mounting plates within the System Pro E Power product range, helping engineers select the appropriate component for their enclosure arrangement.
Designed for integration with compatible ABB modular switchboard structures, the PWRP1880 provides an application-specific solution for electrical contractors, panel builders and system integrators. Equipment compatibility, fixing positions, permissible mounting loads and the necessary installation accessories should be verified against the relevant ABB technical documentation before assembly.
Mounting plates are important mechanical components in the construction of low-voltage electrical distribution switchboards. They provide a designated surface for securing suitable electrical devices and associated equipment within an enclosure. Correct mounting plate selection helps establish an organised internal arrangement while supporting the mechanical requirements of the installed components.
The ABB PWRP1880 is specifically identified as a full-height mounting plate with nominal dimensions of 1800 mm in height and 800 mm in length. Its extended configuration makes it relevant to compatible switchboard structures requiring a full-height mounting arrangement rather than a smaller sectional plate.
Within the ABB System Pro E Power modular platform, mounting accessories must be selected to match the intended enclosure structure and electrical equipment layout. The PWRP1880 provides a manufacturer-designated component for the corresponding dimensional configuration, supporting consistent selection during switchboard design, procurement and assembly.
The specified 800 mm nominal length offers a larger dimensional configuration than a 600 mm mounting plate, making the PWRP1880 relevant where the compatible switchboard arrangement calls for the wider component. However, the manufacturer's nominal dimensions should not be interpreted as confirmation of the usable mounting area, fixing-hole pattern or maximum permissible equipment load.
When planning the installation of electrical equipment, engineers should consider the size and mass of the intended devices, the required mechanical fixing arrangements, cable routing, electrical clearances, heat dissipation and accessibility for inspection and maintenance. These requirements must be assessed as part of the complete switchboard design.
The ABB PWRP1880 full-height mounting plate can form part of professionally engineered electrical distribution assemblies in industrial facilities, commercial buildings and other low-voltage power distribution environments. Its suitability depends on the selected System Pro E Power enclosure configuration and the requirements of the equipment being installed.
Before installation, panel builders should verify compatibility with the enclosure frame, mounting accessories, equipment fixing methods and applicable mechanical loading requirements using the relevant ABB technical documentation. The PWRP1880 is a mechanical mounting accessory and does not independently establish the electrical ratings, ingress protection, short-circuit withstand performance or compliance classification of the completed switchboard.
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ001901B0000 |
| Product type | Full-height mounting plate |
| Manufacturer designation | FULL H.MOUNTING PLATE H=1800MM L=800MM |
| Mounting plate configuration | Full height |
| Nominal height | 1800 mm |
| Nominal length | 800 mm |
| Nominal dimensions | 1800 mm × 800 mm |
| Product group | System Pro E Power |
| Application | Electrical equipment mounting within low-voltage distribution switchboards |
| System compatibility | ABB System Pro E Power modular switchboard assemblies |
The ABB PWRP1880 is a full-height mounting plate designed for compatible ABB System Pro E Power low-voltage electrical distribution switchboards. It provides a designated mechanical mounting component for suitable electrical equipment within a modular enclosure.
The PWRP1880 is specified with a nominal height of 1800 mm and length of 800 mm. These dimensions identify the manufacturer's mounting plate configuration. The actual usable mounting area and fixing positions should be verified against the relevant ABB technical documentation.
Full-height mounting plate describes an extended mounting arrangement intended for a compatible switchboard structure. The PWRP1880 provides a manufacturer-designated plate for the specified 1800 mm × 800 mm configuration rather than a smaller sectional mounting component.
Yes. The PWRP1880 is intended as a mechanical mounting component for suitable electrical equipment within compatible System Pro E Power assemblies. The equipment type, fixing method, mounting loads, electrical clearances and enclosure compatibility must be verified before installation.
The ABB manufacturer order code is 1STQ001901B0000, and the product reference is PWRP1880. This full-height mounting plate belongs to the ABB System Pro E Power product group.
ABB System Pro E Power provides a modular platform for professional low-voltage electrical distribution assemblies. The PWRP1880 full-height mounting plate supports compatible 1800 mm high and 800 mm long mounting configurations, helping electrical contractors, switchboard manufacturers and system integrators select purpose-designed components for organised and professionally engineered electrical distribution infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.